Audited Supplier
UV aging test chamber:
The UV aging test chamber is a testing equipment used to simulate and accelerate the aging process of materials under UV light irradiation. It is mainly used to evaluate the durability and stability of materials such as plastics, coatings, rubber, textiles, automotive parts, building materials, etc. exposed to long-term ultraviolet (UV) radiation outdoors.
| Product model | ZC-UVA340 | ZC-UVB313 |
| UV lamp tube | UVA340 | UVB313 |
| Wavelength | 320~400 nm | 275~375 nm |
| Wave peak value | 340 nm | 313 nm |
| Radiation intensity | 0.3~1.2 W/m2/nm | 0.3~1.1W/m2/nm |
| Temperature range | RT+10ºC~70ºC | |
| Humidity range | 75%~95% R.H | |
| Temperature uniformity | ±3ºC | |
| Temperature fluctuation | ±5ºC | |
| Center distance inside the lamp tube | 65~70 mm | |
| Distance between the sample and the center of the lamp tube | 55mm | |
| Standard test piece | 75*150 mm about 40 pieces | |
| Light heating system | Nickel chromium alloy heater | |
| Dew humidification system | Stainless steel sheathed humidifier (surface evaporation) | |
| Exposure methods | Moisture condensation exposure, light irradiation exposure | |
| Material of inner and outer boxes | Inner box: SUS304 stainless steel; Outer box: high-strength cold-rolled steel double-sided electrostatic resin high-temperature baking paint or SUS304 stainless steel | |
| Protective devices | Machine leakage protection switch, overcurrent protection, short circuit protection, water shortage alarm protection, fault alarm system | |
| Source | 1Φ220V AC±10% 50/60Hz | |
>>GB/T16422.1-2006/IS04892-1:1999 Plastics - Laboratory Light Source Exposure Test Methods - General
>>GB/T16422.3-2014/IS04892-3:2006 Plastics Laboratory Light Source Exposure Test Methods Part 2: Xenon Arc Lamp
>>GB/T14522-2008 Test Method for Artificial Climate Aging of Plastics, Coatings, and Rubber Materials for Mechanical Industry Products - Fluorescent UV Lamp
>>GB/T 23987-2009/IS0 11507:2007 Paints and Varnishes - Exposure to Artificial Climate Aging (UV)
>>GB/T9535-2006/IEC61215:2005 Ground crystalline silicon photovoltaic modules - Design identification and shaping (10.10 UV pre-treatment test part)
>>ASTMG154-2006
>>ASTM G153
The UV aging test chamber is widely used in industries such as plastics, coatings, rubber, textiles, and automotive components to evaluate the weather resistance of products during outdoor use, such as color changes, loss of glossiness, cracks, powdering, etc. Through this accelerated aging test, the performance of the product in actual use can be predicted, thereby guiding the design and improvement of the product
Our UV aging test chambers come in various types, including box type and inclined tower type. The box type can also be divided into baked paint and stainless steel versions. In addition to UV aging test chambers, we also have different types of aging test chambers, such as high-temperature aging test chambers, xenon lamp aging test chambers, etc
Tower style Box style painted version Box style stainless steel version
High temperature aging xenon-arc weathering High and low temperature test
Zhicheng Testing Instrument
Zhicheng Instrument Co., Ltd. is located in Dongguan City, Guangdong Hong Kong Macao Greater Bay Area. It is a high-tech enterprise that integrates research and development, production, sales, and service. Since its establishment, the company has been committed to the research and development of environmental testing, optical testing, and mechanical testing instruments and equipment. It has launched high-performance and modern intelligent testing equipment that meets the needs of industries such as aviation, wire, electronics, electricians, toys, hardware, paper products, batteries, optical optoelectronics, and scientific research. The company meets the needs of customers with advanced processing equipment, exquisite manufacturing technology, strict management system, and strong technical strength.
