Audited Supplier
The high-speed precision five-axis bridge type machining center CBS400 has the characteristics of high rigidity, high precision and high efficiency machining. CBS series machine tools adopt a bridge structure layout, and the XYZ axis movement is not affected by the AC axis, allowing high-precision processing to be maintained for a long time; the entire machine uses finite element analysis to design each component to provide the best overall stability.
The three-axis rapid displacement is 30M/min, the T-T tool changing time only takes 5 seconds, and there is no alarm for 24 hours when the tool magazine is fully loaded. Each machine's trial processing sample has passed the running machine and three-dimensional inspection, ensuring the high efficiency and continuous stability of the machine tool after leaving the factory. . It is suitable for concave and convex models with complex two-dimensional or three-dimensional shapes that require one-time processing of five-axis linkage. It is more suitable for small and medium-sized batches of multi-variety processing and production, and can also be used for automatic line mass production.
Adopting the latest C80 plus system, 15-inch large LCD screen, tool path dynamic graphic display, intelligent alarm display, self-diagnosis and other functions make the use and maintenance of the machine tool more convenient and faster; the high-speed bus communication method greatly improves the data of the CNC system Processing power and control performance, the program storage capacity is increased to 4G, and the pre-reading capability is increased to 3000 lines/second, making it easy to read data quickly and accurately. Efficient transfer and online processing of large-volume programs.
| Item | Unit | CBS400 | |
| Travel | Travel of X/Y/Z axis | mm | 460 x 390 x 400 |
| Distance from spindle end face to work table | mm | 155-555 | |
| The maximum distance from the center of the A-axis 90° spindle to the C-axis disk surface | mm | 315 | |
| Max. Working size | mm | Φ400 x 400 | |
| C-axis turntable | Turntable Dia. | mm | Φ400 |
| Turntable T-slot/Guide width | mm | 14H7/ 25H7 | |
| Allowable load | kg | 400 | |
| Feed of 3 axis | X/Y/Z axis fast move | m/min | 30/30/30 |
| Cutting feed rate | mm/min | 0-12000 | |
| Spindle | Spindle specification (installation diameter /transmission method) | mm | 120/Built-in |
| Spindle taper | m/min | E40 | |
| Max. Spindle speed | mm | 30000 | |
| Spindle Motor Power (Continuous/S3 40%) | Kw | 11 / 13.2 | |
| Spindle Motor Torque (Continuous/S3 40%) | N.m | 11.5 / 13.8 | |
| Tool | Tool magazine capacity | / | 26 |
| Tools change time(T-T) | s | 5 | |
| Maximum tool diameter | mm | 80 | |
| Max. Tool length | mm | 200 | |
| Max. Tool weight | Kg | 3 | |
| Guide | X-axis guide (size/number of slides) | mm | 35/2 |
| Y-axis guide (size/number of slides) | mm | 45/2 | |
| Z-axis guide (size/number of slides) | mm | 35/2 | |
| 3-axis transmission | X-axis screw | mm | Φ40 × 10 |
| Y-axis screw | mm | Φ40 × 10 | |
| Z-axis screw | mm | Φ40 × 10 | |
| 5 axis | A-axis rated/max speed | rpm | 30/60 |
| A-axis rated/max cutting torque | Nm | 940/2000 | |
| C-axis rated/max speed | rpm | 100 / 150 | |
| C-axis rated/max cutting torque | Nm | 185 / 318 | |
| A-axis positioning/repeatability | arc-sec | 10 / 6 | |
| C-axis positioning/repeatability | arc-sec | 8 / 4 | |
| 3-axis accuracy | Positioning accuracy | mm | 0.005 / 300 |
| Repeat positioning accuracy | mm | 0.003 / 300 | |
| Lubrication system | Lubrication unit capacity | L | 0.7 |
| Lubrication type | / | Grease lubrication | |
| Cutting fluid | Water tank capacity | L | 300 |
| Cutting pump parameters | / | 0.32Mpa x 16L/min | |
| Others | Air demand | Kg/cm2 | ≥ 6 |
| Air source flow | mm3/min | ≥ 0.5 | |
| Battery capacity | KVA | 30 | |
| Weight | T | 5 | |
| Machine size (L x W x H) | mm | 3360 x 2910 x 2850 | |
Q1:How can l choose the most suitable machines?
A: Please tell me your specifications, and we will help you select the best model, or you can choose the exact model yourself. Alternatively, you can send us the product drawings, and we will recommend the most suitable machines for your needs.
Q2: What are the main products of your company?
A: We specialize in all kinds of machines, such as CNC Lathe Machine , CNC Milling Machine, CNC Turning Machine, Vertical Machining Center, Horizontal Machining Center, Lathe Machines, Turning and milling composite processing so on.
Q3: Where is our factory located? How can l visit there?
A: We have 5 factories located in Guangzhou, Quzhou, Ningbo, and Guangdong. You are warmly welcome to visit us.
Q4. How do you transport it?
A: Provide Transportation Solution DDP/CIF/FOB/FCA.
Q5: What are the Payment Terms?
A: T/T, 30% initial payment when ordering, 70% balance payment before shipment.
Q6:What's the OMQ?
A: 1 set. (Only some low cost machines will be more than 1 set )
We want to know:
1. We strongly suggest you tell us the size, and material of your workpiece for our evaluation, if possible, better to send us a workpiece drawing so that we can recommend you the most suitable model.
2. If need a CIF Price, please kindly tell us the port of destination.
