Wholesale General Purpose Neutral Silicone Sealant for Windows and Doors Construction Adhesive

Price $1.30 Compare
Min Order 960 Pieces
Shipping From Guangdong, China
Popularity 482 people viewed
Quantity
+-
 

Foshan City Shunde District Chuang Shiji Industrial Co., Ltd.

VIP   Audited Supplier 10 years
Profile Certified by SGS/BV
S-550
Instant Adhesive
Water Emulsion
Construction, Woodworking
Silicone
Room Curing
Rubber
Waterproof
Curing Agent
Organic Material
All Color as Customer Requirement
480g
430g
60g
240ml
24 PCS/CTN
30*20*24cm
10-30 Mins
4 Days
After 21 Day
1.45
Neutral Silicone Sealant for General Purpose C-550
Carton
240ml
China
3506100090
Product Description

S-550 Wholesale General Purpose Neutral Silicone Sealant for Windows and Doors Construction Adhesive

Product Description


Characteristics:
1.One component
2. Neutral Curing and non-corrosive to metal, coated glass, concrete and marble
3. Non-discoloring. 
4. Excellent adhesion to glass, metal and plastic etc
5. Excellent resistance to low and high temperature, little performance changes between -40 ºC~150 ºC
6. Excellent resistance ultraviolet radiation
7. Odorless

 
Application:
For a wide range of Aluminum doors and windows, plastic steel doors and windows, stainless steel, glass, Aluminum sheet, ceramics, sky light, roof, most of building material. Can not use for coated glass.
 

Curing Time:
Track-free Time is between 15 to 20 minutes at room temperature
Completely curing Time is between 48 hours to 96 hours at room temperature.

Color available:
White, greyblack, others of special order


 

Installation Instructions


Way of use:
1.preparation:clean,de-grease and dry the surface.protect the edges of sealing gap with masking tape;
2.cut the nozzle according to the fissure width,cut off the tube outlet over the thread and screw the nozzle on;
3.application temperature +5c to +30c;
4.extrude silicone by means of cartridge gun;
5.tool the sealant with a wet spatula before formation occurs;
6.up to 15min, remove the masking tape;
7.fresh spots can be clean with water, after hardening mechanically only

Limitations:
1.Cannot be used as structural sealant.
2.Not compatible with materials with grease or exudation.
3.The construction surface should be clean and dry.
4.Not applicable to the seal of the immersed, airtight, or comprising substrates like copper, brass and lead, and oil-exudation surfaces.
5.Cannot be used on the substrate surface below 6ºC or above 40 ºC
 
Notices:
1. For best result, use opened cartridges on the same day. Otherwise store it strictly tightened
2. Pre-test is necessary to ensure the excellent adhesive property.
3. Avoid contacting with skin or eyes, in case of contacted, rinse immediately with plenty of water, go to hospital if necessary
4. Keep away from children before curing.
5. Avoid contaminating food, medicine or cosmetics.
 
 

Packaging & Shipping


Packaging
Cartridge: 240 ml   24 cartridges/ctn
Gross weight: 470 g     Net weight: 410 g   
Sausage: 780G    20 sausages/ctn

Storage and transportation:
1. 12 months stored in a dry and ventilated place below 27ºc in original packaging.
2. non-dangerous, can be transported by train, automobile, ship.
3. Uncured product may irritate eyes. In case of eyes contact, rinse them immediately with water and seek medical aid.
4. Keep out of reach of children.
 

Our Advantages


TECHNICAL DATA SHEET
Testing Standard: GB/T 14683-2003
 
NoItemThe standardTest result
1AppearanceHave no grain, no agglomerations, no skinning, and no bubble.Pass the standard
2Density (g/cm3)±0.11.438
3Droop degree
mm
Uprightness≤30
LevelNo damageNo damage
4Skinning time(h)≤30.33
5Elastic recovery ratio (%)≥8092
6Extrusion ability(ml/min) ≥80116
7Tensile modulus
 (Mpa)
23ºC≤ 0.60.7
8Cold-hot adhesiveNo damageNo damage
9Under water adhesiveNo damageNo damage
10UV radiationNo damageNo damage
11Definite ElongationNo damageNo damage
 

Certifications


Certificate


FAQ


FAQ:

1.Can u send sample to us ?
   Yes, the sample is free.
 
2.Can you give us private design ?
   Yes, we offer OEM service, can making your own brand.
 
3.What's your guarantee?
   10-15 years.
 
4.Can you provide us with your client information ?
    Yes, for checking our company reputation and sample collection.
 
5.How many days to produce one 20'container?
   10-15days.
 
6.Can we visit factory?
   Yes, warmly welcome to visit us at any time.
 
7.What are the documents we provide ?
   Packing list, commercial invoice, CO / FORM E / FORM A , BL making    according to your demand. 
 


Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA