Audited Supplier
C-352
Structural Adhesive
Solid-State
Construction, Woodworking
Silicone
Room Curing
Rubber
Weatherability
107 Glue
Organic Material
White, Grey, Black, Clear, as Your Requirement
Acid
Cartridge
0.9
30*20*24 Cm
410g
430g
24 PCS/CTN
Glass Wall
12 Months
MSDS
CSJ
Carton
300ml
China
3506100090
Product Description
Structural Silicone Sealant for Great Glass Curtain Wall (C-352)
Characteristics:
1. One component
2. Neutral Curing structural sealant and non-corrosive to metal, coated glass, concrete and marble
3. Non-discoloring and non-pollution
4. Excellent adhesion to glass and Aluminum etc
5. Excellent resistance to low and high temperature, little performance changes between -40 ºC~150 ºC
6. Odorless
Application:
Structural adhesion on point fix curtain wall, great glass curtain wall and glass roof, glass, aluminum alloy doors and windows fittings, ceramic, faucet, cold storage rooms and so on
Way of use:
1.preparation:clean,de-grease and dry the surface.protect the edges of sealing gap with masking tape;
2.cut the nozzle according to the fissure width,cut off the tube outlet over the thread and screw the nozzle on;
3.application temperature +5c to +30c;
4.extrude silicone by means of cartridge gun;
5.tool the sealant with a wet spatula before formation occurs;
6.up to 15min, remove the masking tape;
7.fresh spots can be clean with water, after hardening mechanically only
Curing Time:
Track-free Time is between 25 to 30 minutes at room temperature
Completely curing Time is between 48 hours to 96 hours at room temperature.
Notices:
1. For best result, use opened cartridges on the same day. Otherwise store it strictly tightened
2. Pre-test is necessary to ensure the excellent adhesive property.
3. Avoid contacting with skin or eyes, in case of contacted, rinse immediately with plenty of water, go to hospital if necessary
4. Keep away from children before curing.
5. Avoid contaminating food, medicine or cosmetics.
Packaging
Cartridge: 300 ml 24 cartridges/ctn
Gross weight: 470 g Net weight: 410 g
Showroom
Storage and transportation:
12 months stored in a dry and ventilated place below 25 ºC in original packaging.
Non-dangerous, can be transported by train, automobile, ship.
Testing Standard: GB16776-2005
TECHNICAL DATA SHEET
Certificate
FAQ:
1.Can u send sample to us ?
Yes, the sample is free.
2.Can you give us private design ?
Yes, we offer OEM service, can making your own brand.
3.What's your guarantee?
10-15 years.
4.Can you provide us with your client information ?
Yes, for checking our company reputation and sample collection.
5.How many days to produce one 20'container?
10-15days.
6.Can we visit factory?
Yes, warmly welcome to visit us at any time.
7.What are the documents we provide ?
Packing list, commercial invoice, CO / FORM E / FORM A , BL making according to your demand.
Characteristics:
1. One component
2. Neutral Curing structural sealant and non-corrosive to metal, coated glass, concrete and marble
3. Non-discoloring and non-pollution
4. Excellent adhesion to glass and Aluminum etc
5. Excellent resistance to low and high temperature, little performance changes between -40 ºC~150 ºC
6. Odorless
Application:
Structural adhesion on point fix curtain wall, great glass curtain wall and glass roof, glass, aluminum alloy doors and windows fittings, ceramic, faucet, cold storage rooms and so on
Way of use:
1.preparation:clean,de-grease and dry the surface.protect the edges of sealing gap with masking tape;
2.cut the nozzle according to the fissure width,cut off the tube outlet over the thread and screw the nozzle on;
3.application temperature +5c to +30c;
4.extrude silicone by means of cartridge gun;
5.tool the sealant with a wet spatula before formation occurs;
6.up to 15min, remove the masking tape;
7.fresh spots can be clean with water, after hardening mechanically only
Curing Time:
Track-free Time is between 25 to 30 minutes at room temperature
Completely curing Time is between 48 hours to 96 hours at room temperature.
Notices:
1. For best result, use opened cartridges on the same day. Otherwise store it strictly tightened
2. Pre-test is necessary to ensure the excellent adhesive property.
3. Avoid contacting with skin or eyes, in case of contacted, rinse immediately with plenty of water, go to hospital if necessary
4. Keep away from children before curing.
5. Avoid contaminating food, medicine or cosmetics.
Packaging
Cartridge: 300 ml 24 cartridges/ctn
Gross weight: 470 g Net weight: 410 g
Showroom
Storage and transportation:
12 months stored in a dry and ventilated place below 25 ºC in original packaging.
Non-dangerous, can be transported by train, automobile, ship.
Testing Standard: GB16776-2005
TECHNICAL DATA SHEET
| No | Item | The standard | Test result | |
| 1 | Appearance | Have no grain, no agglomerations, no skinning, no bubble. | Pass the standard | |
| 2 | Droop degree mm | Uprightness | ≤3 | 0 |
| Level | Not change shape | Not change shape | ||
| 3 | Extrusion (s) | ≤10 | 2 | |
| 4 | Skinning time/h | ≤3 | 0.5 | |
| 5 | Hardness (HsA) | 20~60 | 46 | |
| 6 | 23ºCTensile modulus Mpa | 10% Tensile h/kPa | / | 288.7 |
| 20% Tensile h/kPa | / | 442.1 | ||
| 40% Tensile h/kPa | / | 620.6 | ||
| 7 | Tensile adhesion capability | at 23ºC Tensile strength in Adhesion (Mpa) | ≥0.60 | 1.02 |
| Adhesion broken area (%) | ≤5 | 0 | ||
| Elongation at Ultimate Strength (%) | ≥100 | 173 | ||
| at 90ºC Tensile strength in adhesion (Mpa) | ≥0.45 | 0.76 | ||
| Adhesion broken area (%) | ≤5 | 0 | ||
| At -30ºC C12 Tensile strength in Adhesion (Mpa) | ≥0.45 | 1.49 | ||
| Adhesion broken area (%) | ≤5 | 0 | ||
| After flooding Tensile strength in Adhesion (Mpa) | ≥0.45 | 0.86 | ||
| Adhesion broken area (%) | ≤5 | 0 | ||
| After UV radiation Tensile strength in adhesion(Mpa) | ≥0.45 | 0.84 | ||
| Adhesion broken area (%) | ≤5 | 0 | ||
| 8 | Aging test | TG (%) | ≤10 | 4.2 |
| cracking | NO | NO | ||
| efflorescence | NO | NO | ||
Certificate
FAQ:
1.Can u send sample to us ?
Yes, the sample is free.
2.Can you give us private design ?
Yes, we offer OEM service, can making your own brand.
3.What's your guarantee?
10-15 years.
4.Can you provide us with your client information ?
Yes, for checking our company reputation and sample collection.
5.How many days to produce one 20'container?
10-15days.
6.Can we visit factory?
Yes, warmly welcome to visit us at any time.
7.What are the documents we provide ?
Packing list, commercial invoice, CO / FORM E / FORM A , BL making according to your demand.
