Audited Supplier
1. Stainless steel tank container is suitable for edible oil, fruit juice, beverage, medicine, chemical industry and other industries.
2. We manufacture tank containers for petroleum, chemical and water transportation. Our products include carbon
Steel, stainless steel.
3. We provide a full range of oil tanks, including: gasoline and diesel tanks, drinking water tanks and various customized oil tank containers to meet your specific requirements.
4. We provide T75 and T50 gas tank containers.
| TSG R0005-2011 <Mobile Pressure Vessel Safety Technical Inspection Regulations>, "International Maritime Dangerous Goods Code" (IMDG CODE) JB / T4780-2002 "Liquefied Natural Gas Tank Containers", Container Inspection Code-2012 | ||||||
| Guidelines for tank container | T75 | |||||
| Container Type of this tank container | 1AA | |||||
| Rated weight for this tank container | 32723kgs | |||||
| Maximum Allowed Loading Weight for this tank container | 14700kgs | |||||
| Tare weight for this tank container | 18023kgs | |||||
| Allowed stacking weight for this tank container | 192000kgs | |||||
| Manufacturing license level of this tank container | Inside tank | C3 | ||||
| outside tank | ||||||
| Max. Working Pressure(Mpa.) for this tank container | Inside tank(MPa) | 0.7 | ||||
| outside tank(MPa) | -0.1(Vacuum) | |||||
| Min. Working Tempretrues for this tank container | Inside tank | -162 °C | ||||
| outside tank | -20°C | |||||
| Design Pressure(Mpa.) for this tank container | Inside tank | 0.8 | ||||
| outside tank | -0.1/0.2 | |||||
| Design Tempretrues for this tank container | Inside tank | -196 °C | ||||
| outside tank | 50 °C | |||||
| The Main material for this tank container | Cover | inside tank | S30408 | |||
| outside tank | Q345R | |||||
| Shell | inside tank | S30408 | ||||
| outside tank | Q345R | |||||
| Overall Size(Frame)/L*W*H/mm for this tank container | 12192*2438*2591 | |||||
| Media for this tank container | Inside tank | LNG | ||||
| Media Characteristics for this tank container | Inside tank | explosive | ||||
| Painting for this tank container | Frame | 30µm +40µm +50µm | ||||
| Shell | 30µm +40µm +50µm | |||||
| Total Volume(L) for this tank container | 40440 | |||||
| Effective volume(L) for this tank container | 36400 | |||||
| Rated filling rate for this tank container | 90% | |||||
| Corrosion allowance for this tank container | Inside tank | 0mm | ||||
| outside tank | 1mm | |||||
| Air tightness test pressure(Mpa) for this tank container | Inside tank | 0.8mm | ||||
| outside tank | 0.2mm | |||||
| Air pressure test pressure for this tank container | Inside tank(MPa) | 0.92 | ||||
| Welding joint coefficient for this tank container | Inside tank | 1 | ||||
| outside tank | 0.85 | |||||
| Static evaporation rate for this tank container | Inside tank | <=0.18 | ||||
| Material density(kg/m3) for this tank container | Inside tank | 426 | ||||
| Natural boost rate for this tank container | Inside tank | <=13 | ||||
| Main hazard category for this tank container | 2.1 | |||||
| Design service life for this tank container | 15 years | |||||
| Mode of transportation for this tank container | Road,Sea or Railway | |||||
| Adiabatic form for this tank container | High vacuum multilayer insulation | |||||
| Emergency cut-off valve for this tank container | Type | Gas phase | KDJ661F-16P | |||
| liquid phase | KDJ661F-16P | |||||
| Nominal pressure | Gas phase(Mpa) | 1.6 | ||||
| liquid phase(Mpa) | 1.6 | |||||
| Nominal Diameter | Gas phase | DN50/DN32 | ||||
| liquid phase | DN50 | |||||
| Operation way | Gas phase | Pneumatic motion control | ||||
| liquid phase | Pneumatic motion control | |||||
| Fusible temperature for the Fusible alloy of the fusible plug(°C) | 70+/-5 | |||||
| Safety valve for this tank container | Type | ZA25-5B | ||||
| Mode | Low temperature modular safety valve | |||||
| Level gauge for this tank container | Type | ZK-1.5-6-1 | ||||
| Mould | CYJ-1 Double liquid column pressure difference level gauge | |||||
| Nominal pressure(Mpa) | 1.6 | |||||
| Nominal Diameter | DN6 | |||||
| Measuring range(Kpa) | 0~15 | |||||
| Precision | >=2.5 | |||||
| Loading and unloading device for this tank container | Gas phase joint | Type | Flange connection | |||
| Nominal Diameter | DN50 | |||||
| liquid phase joint | Type | Flange connection | ||||
| Nominal Diameter | DN50 | |||||
| Pressure gauge for this tank container | Type | YN-100 | ||||
| Measuring range(Mpa) | 0~1.6 | |||||
| Precision | 1.6 Class | |||||
| Shell blasting device for this tank container | Burst pressure(Mpa) | <=0.1 | ||||
| Nominal Diameter | DN80 | |||||
| Type | YEJ80-0.1-50 | |||||
| Orifice table | ||||||
| symbol | Nominal Size | Nominal Pressure | Tube Size | Purpose and Name | Connection standard and Type | |
| CZ1 | 50 | 40 | Ø57*3.5 | liquid phase entrance | HG/T20592-2009 | |
| CZ2 | 50 | 40 | Ø57*3.5 | Gas phase entrance | HG/T20592-2009 | |
| CZ3 | 32 | 40 | Ø38*3 | Supercharger liquid phase entrance | HG/T20592-2009 | |
| j | 80 | / | / | Shell explosion-proof port | / | |
| Technical Requirements | ||||||
| 1. | This frame tank container should carry out all kinds of the test according to the GB / T16563-1996 and China Classification Society "Container Inspection Code". | |||||
| 2. | Except for the pictures' mark, the type and size of the welded structure shall be in accordance with GB / 985.1. The height of the weld foot and weld fillet is according to the thickness of the less thinner steel plate.There should not be crack, slag, porosity, or undercut, etc. on the surface of the welded joint.Weld seam surface will be inspected through the magnetic powder or penetration testing (preferred magnetic powder). Meet NB / t47013.4 (5) -2015, Class I qualified. | |||||
| 3. | The accessories for this tank container shall meet the corresponding standards of product quality certification,which can be carried out the air tightness test together with the tank after passing the re-examination and form a complete set then delivery from the factory; | |||||
| 4 | Valve opening operation,should be able to withstand the pressure of the air tightness test , fully open, fully closed, flexible operation, no abnormal resistance, idling and so on; | |||||
| 5 | All signs, brand names, stickers will be made according to the drawings after the competion of the painting; The area around the signs, brand names and rivets will be sealed with the sealant. | |||||
| 6 | The vertical plane of the longitudinal centerline of the tank container shall be coincident with the vertical plane of the longitudinal centerline of the frame. The offset shall not exceed 5mm. | |||||
| 7 | All supports of the connections between the tank and the frame should be thin welding, and welding firm and reliable, the weld seam surface shall not have cracks, undercut, stomatal, crater and splash. | |||||
| 8 | Tank coating in line with the relevant provisions of JB / T4711-2003. After complete cleaning the rust of the outside carbon steel surface of the tank,coated two anti-rust primer, two white finish. | |||||
| 9 | The tank needs to be replaced with nitrogen or vacuumed before leaving the factory. (1) the use of nitrogen replacement treatment, the oxygen content after treatment is less than 3%, and keep the residual pressure 0.05Mpa ~ 0.1Mpar; (2) the use of vacuum treatment, the vacuum after treatment is not less than 0.086Mpa. | |||||
| 10 | Emergency cut-off device should be installed before the air tightness test, the test medium is air, the test pressure is 0.1Mpa;After the installation is complete, Emergency shut-off device should be done through emergency cut off and filter protection test, gas valve, liquid valve and booster valve completely closed in 5S qualified, air source control valve rotation flexibility, no jamming phenomenon. | |||||
1. This product is a stainless steel pressure vessel installed in a fastening outer frame.
2. Good compression and shock resistance. It has strong corrosion resistance and corrosion resistance.
3. This container is widely used in the liquid transportation and storage industries on roads/railroads/ships.
Customized low price factory direct sales 10FT/20FT/30FT/40FT tank container
ISO storage tank (tank container) is a container installed in a tight outer frame. It is mainly composed of a tank body and a frame. The frame is made of high-strength steel, and the tank body is placed in the middle of the frame.
Our factory has more than 20 years of experience. Well-known at home and abroad, focusing on the research and development of tank containers and trailers. Our aim is to provide customers with high-quality and low-cost products. The experienced technical team customizes the best products for customers. For any reliability, safety and economic related issues, we have mature solutions at any time
2.According to customer requirements, we can customize it.
3.This Tank container is equipped with cryognic pump, you can operate your ISO Storage tank container very convenient and easily.
Located in the beautiful port city of Qingdao, Shandong Province, QINGDAO Tiny Maque international Trading Co., Ltd. is a professional manufacturer specializing in the production, design, sales of containers, container trailer, truck part, special box ordering and international trade in one. The company was established in September 2005, with a plant area of over 50, 000 square meters.
The company has 586 employees, 38 engineers, including 16 designers and 32 professional engineers and technicians. The company has a complete industrial chain of engineering consultation, scheme design, production and processing, construction and project acceptance. Our products are widely used in domestic and international logistics transportation, cold chain transportation, workshops, warehouses, stations, 4S showrooms, etc. Container, special box and container house products are well received by domestic and foreign customers, not only popular in China, but also exported to the United States, Canada, Britain, Japan, Korea, Singapore, Bangladesh, Indonesia, Israel, Nigeria, Sri Lanka, Philippines, Mozambique and other countries and regions. In order to meet the requirements of lean production of our products, we have introduced advanced production lines and are constantly engaged in innovation and product development.
At present, we have more than 10 production lines, such as CNC flame cutting production line, C-beam production line, H-beam set, door submerged arc welding production line, sandwich panel production line, bearing panel production line, etc. We are ISO9001-2008 certified and have a perfect quality control process. The five major factors affecting product quality, including people, machines, materials, methods and environment, are strictly controlled and integrated in every production process. The quality of our products meets international standards. We have established a 24-hour response mechanism, adhering to the service belief that product quality is more important than anything else, and customer interests are above everything else, to relieve all worries for our customers. We insist on product specialization, scale production and the introduction of new technology. " Quality project excellence, considerate and meticulous customer service" will be our purpose. We hope to create a better future with our customers.
1.What's your advantage?
A: Honest business with competitive price and professional service on export process.
2. How I believe you?
A : We consider honest as the life of our company, we can tell you the contact information of our some other clients for you to check our credit. Besides, there is trade assurance from Alibaba, your order and money will be well guaranteed.
3.Can you give warranty of your products?
A: Yes, we extend a 100% satisfaction guarantee on all items. Please feel free to feedback immediately if you are not pleased with our quality or service.
4.Where are you? Can I visit you?
A: Sure,welcome to you visit our factory at any time.
5.How about the delivery time?
A: Within 15-35 days after we confirm you requirement.
6.what kind of payment does your company support?
A: T/T, 100% L/C at sight, Cash, Western Union are all accepted if you have other payment,please contact me.
