Audited Supplier
SINAMICS variable frequency drives
SINAMICS variable frequency drives - the ultimate solution for all drive applications. From low voltage to medium voltage to direct current (DC), our drives meet your needs. With increased efficiency and versatility, take your applications to the next generation for a digital and sustainable future.
SINAMICS G120 standard converters
The SINAMICS G120 frequency converter is designed to provide precise and cost-effective speed/torque control of three-phase motors.
With different device versions (frame sizes FSA to FSG) in a power range from 0.37 kW to 250 kW, it is suitable for a wide variety of drive solutions.
SINAMICS G120 standard converters
The SINAMICS G120 frequency converter is designed to provide precise and cost-effective speed/torque control of three-phase motors.With different device versions (frame sizes FSA to FSG) in a power range from 0.37 kW to 250 kW, it is suitable for a wide variety of drive solutions.
Example: SINAMICS G120, frame sizes FSA, FSB and FSC; each with Power Module, CU240E-2 F Control Unit and Basic Operator Panel BOP-2
Example: SINAMICS G120, frame sizes FSD, FSE, FSF and FSG; each with Power Module, CU240E-2 F Control Unit and Intelligent Operator Panel IOP-2Selecting the Power Module
The optimum power unit can be quickly selected based on the required motor power, the supply voltage and the braking cycles to be expected. Power Modules in degree of protection IP20 are intended for installation in a control cabinet.
PM240-2 Power Modules - degree of protection IP20
PM240-2 Power Modules have an integrated braking chopper (four-quadrant applications) and are suitable for a large number of applications in general machinery construction.
PM250 Power Modules - degree of protection IP20
PM250 Power Modules are suitable for the same applications as the PM240-2. Any braking energy is directly fed back into the line supply (four-quadrant applications - a braking resistor is not required).
The Power Modules can be combined with the following Control Units:
| Control Units | Power Modules degree of protection IP20 | |
| PM240-2 | PM250 | |
| CU230P-2 | ✓ | ✓ |
| CU240E-2 | ✓ | ✓ |
| CU250S-2 | ✓ | ✓ |
| Rated power 1) | hp | Rated output current IN2) | Frame size | PM240-2 Power Modules Degree of protection IP20 All CUs pluggable | PM250 Power Modules Degree of protection IP20 All CUs pluggable |
| kW | A | Article No. | Article No. | ||
| 200 ... 240 V 1 AC/3 AC | |||||
| 0.55 | 0.75 | 3.2 | FSA | 6SL3210-1PB13-0( )L0 | - |
| 0.75 | 1 | 4.2 | FSA | 6SL3210-1PB13-8( )L0 | - |
| 1.1 | 1.5 | 6 | FSB | 6SL3210-1PB15-5( )L0 | - |
| 1.5 | 2 | 7.4 | FSB | 6SL3210-1PB17-4( )L0 | - |
| 2.2 | 3 | 10.4 | FSB | 6SL3210-1PB21-0( )L0 | - |
| 3 | 4 | 13.6 | FSC | 6SL3210-1PB21-4( )L0 | - |
| 4 | 5 | 17.5 | FSC | 6SL3210-1PB21-8( )L0 | - |
| 200 ... 240 V 3 AC | |||||
| 5.5 | 7.5 | 22 | FSC | 6SL3210-1PC22-2( )L0 | - |
| 7.5 | 10 | 28 | FSC | 6SL3210-1PC22-8( )L0 | - |
| 11 | 15 | 42 | FSD | 6SL3210-1PC24-2UL0 | - |
| 15 | 20 | 54 | FSD | 6SL3210-1PC25-4UL0 | - |
| 18.5 | 25 | 68 | FSD | 6SL3210-1PC26-8UL0 | - |
| 22 | 30 | 80 | FSE | 6SL3210-1PC28-0UL0 | - |
| 30 | 40 | 104 | FSE | 6SL3210-1PC31-1UL0 | - |
| 37 | 50 | 130 | FSF | 6SL3210-1PC31-3UL0 | - |
| 45 | 60 | 154 | FSF | 6SL3210-1PC31-6UL0 | - |
| 55 | 75 | 178 | FSF | 6SL3210-1PC31-8UL0 | - |
| 380 ... 480 V 3 AC | |||||
| 0.37 3) | 0.5 | 1.3 | - | - 3) | - |
| 0.55 | 0.75 | 1.7 | FSA | 6SL3210-1PE11-8( )L1 | - |
| 0.75 | 1 | 2.2 | FSA | 6SL3210-1PE12-3( )L1 | - |
| 1.1 | 1.5 | 3.1 | FSA | 6SL3210-1PE13-2( )L1 | - |
| 1.5 | 2 | 4.1 | FSA | 6SL3210-1PE14-3( )L1 | - |
| 2.2 | 3 | 5.9 | FSA | 6SL3210-1PE16-1( )L1 | - |
| 3 | 4 | 7.7 | FSA | 6SL3210-1PE18-0( )L1 | - |
| 4 | 5 | 10.2 | FSB | 6SL3210-1PE21-1( )L0 | - |
| 5.5 | 7.5 | 13.2 | FSB | 6SL3210-1PE21-4( )L0 | - |
| 7.5 | 10 | 18 | FSB/FSC | 6SL3210-1PE21-8( )L0 | 6SL3225-0BE25-5AA1 |
| 11 | 15 | 26/25 | FSC | 6SL3210-1PE22-7( )L0 | 6SL3225-0BE27-5AA1 |
| 15 | 20 | 32 | FSC | 6SL3210-1PE23-3( )L0 | 6SL3225-0BE31-1AA1 |
| 18.5 | 25 | 38 | FSD | 6SL3210-1PE23-8( )L0 | 6SL3225-0BE31-5( )A0 |
| 22 | 30 | 45 | FSD | 6SL3210-1PE24-5( )L0 | 6SL3225-0BE31-8( )A0 |
| 30 | 40 | 60 | FSD | 6SL3210-1PE26-0( )L0 | 6SL3225-0BE32-2( )A0 |
| 37 | 50 | 75 | FSD | 6SL3210-1PE27-5( )L0 | 6SL3225-0BE33-0( )A0 |
| 45 | 60 | 90 | FSE | 6SL3210-1PE28-8( )L0 | 6SL3225-0BE33-7( )A0 |
| 55 | 75 | 110 | FSE | 6SL3210-1PE31-1( )L0 | 6SL3225-0BE34-5( )A0 |
| 75 | 100 | 145 | FSF | 6SL3210-1PE31-5( )L0 | 6SL3225-0BE35-5( )A0 |
| 90 | 125 | 178 | FSF | 6SL3210-1PE31-8( )L0 | 6SL3225-0BE37-5( )A0 |
| 110 | 150 | 205 | FSF | 6SL3210-1PE32-1( )L0 | - |
| 132 | 200 | 250 | FSF | 6SL3210-1PE32-5( )L0 | - |
| 160 | 250 | 302 | FSG | 6SL3210-1PE33-0( )L0 | - |
| 200 | 300 | 370 | FSG | 6SL3210-1PE33-7( )L0 | - |
| 250 | 400 | 477 | FSG | 6SL3210-1PE34-8( )L0 | - |
| 500 ... 690 V 3 AC | |||||
| 11 | 10 | 14 | FSD | 6SL3210-1PH21-4( )L0 | - |
| 15 | 15 | 19 | FSD | 6SL3210-1PH22-0( )L0 | - |
| 18.5 | 20 | 23 | FSD | 6SL3210-1PH22-3( )L0 | - |
| 22 | 25 | 27 | FSD | 6SL3210-1PH22-7( )L0 | - |
| 30 | 30 | 35 | FSD | 6SL3210-1PH23-5( )L0 | - |
| 37 | 40 | 42 | FSD | 6SL3210-1PH24-2( )L0 | - |
| 45 | 50 | 52 | FSE | 6SL3210-1PH25-2( )L0 | - |
| 55 | 60 | 62 | FSE | 6SL3210-1PH26-2( )L0 | - |
| 75 | 75 | 80 | FSF | 6SL3210-1PH28-0( )L0 | - |
| 90 | 100 | 100 | FSF | 6SL3210-1PH31-0( )L0 | - |
| 110 | 100 | 115 | FSF | 6SL3210-1PH31-2( )L0 | - |
| 132 | 125 | 142 | FSF | 6SL3210-1PH31-4( )L0 | - |
| 160 | 150 | 171 | FSG | 6SL3210-1PH31-7CL0 | - |
| 200 | 200 | 208 | FSG | 6SL3210-1PH32-1CL0 | - |
| 250 | 250 | 250 | FSG | 6SL3210-1PH32-5CL0 | - |
| Heat sink variant | ↑ | ||||
| Standard | 0 | ||||
| Integrated line filter | ↑ | ↑ | |||
| Without | (for IT systems) | U | U | ||
| Category C3 (only for FSG) | (for IT systems 4)) | C | - | ||
| Class A and Category C2 (for FSG) | (for TN systems) | A | A | ||
| Class B | (for TN systems) | - | Integrated line filter not available, as external option only | ||
| 1) Rated power based on the rated output current IN. The rated output current IN is based on the duty cycle for low overload (LO). Low overload (LO) generally applies for applications with low dynamic response (continuous duty), quadratic torque characteristic with low break loose torque and low speed accuracy. Examples: Centrifugal pumps, radial/axial fans, rotary piston fans, radial compressors, vacuum pumps, chain conveyors, agitators. High overload (HO) generally applies for applications with increased dynamic response (cyclic operation) and constant torque characteristics with high break loose torque. Examples: Gear pumps, eccentric worm pumps, mills, mixers, crushers, lifting/lowering gear, centrifuges. | |||||
| 2) The rated output current IN is based on the duty cycle for low overload (LO). These current values are applicable for 200 V, 400 V or 690 V. | |||||
| 3) The PM240-2 Power Module with Article No. 6SL3210-1PE11-8. L1 corresponds to 0.37 kW (0.5 hp) with duty cycle HO. | |||||
| 4) The PM240-2 Power Modules frame size FSG with an integrated Category C3 filter can also be operated on TN systems with a grounded line conductor. To do so, the grounding screw must be removed. Then Category C3 can no longer be adhered to. | |||||
Our product packaging aims to provide functionality and aesthetic appeal. We understand the importance of creating a positive first impression and ensuring the safe delivery of products to customers. The following are the main features of our packaging:
Durable materials: We use high-quality materials that are sturdy and durable, and will not be damaged during transportation. This ensures that our products reach our customers in good condition.
Safe packaging: Our packaging design focuses on a safe outer shell. We use protective layers and liners to prevent any damage to the product caused by external impact or rough handling.
Clear labels: Our packaging includes clear and detailed labels. They provide necessary detailed information, such as product name, quantity, instructions for use, and any necessary warning labels. This helps customers easily identify and understand the product.
Attractive design: We believe that packaging should have visual appeal. Our design team has created a striking modern packaging design that reflects the essence of our brand. This helps our products stand out on store shelves and leave a positive impression.
Shanghai Zhongcheng Fengyuan Industrial Technology Co., Ltd. is an engineering company with a global network of engineering centers, providing high-performance and cost-effective services to global customers. We have established partnerships with most world-renowned brands and can provide components and equipment for the oil and gas, industrial, chemical, and energy industries.
The company's industrial control brand covers major global manufacturers, including but not limited to: Allen Bradley, Siemens, IFM, Beckhoff, Yaskawa, Pepperl+Fuchs, Sick, etc. The products include PLC/DCS modules, touch screens, drive inverters, industrial power supplies, I/O systems, industrial communication, low-voltage control equipment, low-voltage distribution equipment, medium voltage spare parts, protective relays, etc. We have rich industry experience, professional services, and good protective packaging.
We cooperate with various official express delivery companies to export to various parts of the world, such as South Asia, Europe, North America, South America, the Middle East, and Africa. Reducing customer costs helps to create more benefits for each of our customers
Zhongcheng Fengyuan has won the trust of a large number of customers. Our belief is to help our customer factories achieve digitization, intelligence, automation, and create maximum benefits for our customers. Looking forward to working with you!
1. Question: How about the warranty?
Answer: All products we provide come with a 12 month warranty period
2. Question: What about transportation?
Answer: They are in stock and can be shipped immediately. We can arrange DHL at competitive prices The transportation of FedEx, UPS, TNT, EMS, and of course, customers can also use their own freight forwarders.
3. Question: Why did you purchase from us?
Answer: We have a team of qualified sales personnel who are always ready to meet customer needs with high-quality products.
4. Question: Are prices from other suppliers higher than yours?
Answer: Creating maximum benefits for customers is our belief. If you have a better price, please let us know. We will make every effort to meet your price and provide support for you.
5: What payment method do you accept?
Answer: Telegraphic transfer (bank transfer), Western Union transfer, credit card PayPal, Letter of credit, Alipay, cash, trusteeship, etc.
