Audited Supplier
Features of Stainless Steel Wire Mesh
Sturdy construction
Extremely commonly
Easy to install
Low resistance to wind loads
Easily cut to fit
Available in many materials, such as stainless steel 304 and 316
| Specification List of Stainless Steel Wire Mesh | ||
| Mesh/Inch | Wire Gauge(BWG) | Aperture in mm |
| 3mesh x 3mesh | 14 | 6.27 |
| 4mesh x 4mesh | 16 | 4.27 |
| 5mesh x 5mesh | 18 | 3.86 |
| 6mesh x 6mesh | 18 | 3.04 |
| 8mesh x 8mesh | 20 | 2.26 |
| 10mesh x 10mesh | 20 | 1.63 |
| 20mesh x 20mesh | 30 | 0.95 |
| 30mesh x 30mesh | 34 | 0.61 |
| 40mesh x 40mesh | 36 | 0.44 |
| 50mesh x 50mesh | 38 | 0.36 |
| 60mesh x 60mesh | 40 | 0.30 |
| 80mesh x 80mesh | 42 | 0.21 |
| 100mesh x 100mesh | 44 | 0.172 |
| 120mesh x 120mesh | 44 | 0.13 |
| 150mesh x 150mesh | 46 | 0.108 |
| 160mesh x 160mesh | 46 | 0.097 |
| 180mesh x 180mesh | 47 | 0.09 |
| 200mesh x 200mesh | 47 | 0.077 |
| 250mesh x 250mesh | 48 | 0.061 |
| 280mesh x 280mesh | 49 | 0.060 |
| 300mesh x 300mesh | 49 | 0.054 |
| 350mesh x 350mesh | 49 | 0.042 |
| 400mesh x 400mesh | 50 | 0.0385 |
1. Plain Weave: also called tabby weave, linen weav or taffeta weave, is the most basic type of weaves. In plain weave, the warp and weft are aligned so they form a simple criss-cross pattern. Each weft thread crosses the warp threads by going over one, then under the next, and so on. The next weft thread goes under the warp threads that its neighbor went over, and vice versa.
2. Twill Weave: In a twill weave, each weft or filling yarn floats across the warp yarns in a progression of interlaces to the right or left, forming a distinct diagonal line. This diagonal line is also known as a wale. A float is the portion of a yarn that crosses over two or more yarns from the opposite direction.
3. Plain Dutch Weave: similar with plain weave, just the weft and warp wire have different wire diameter and different mesh size.
4. Twill Dutch Weave: similar with twill weave, just the weft and warp wire have different wire diameter and different mesh size.
5. Reversed Dutch Weave: difference from standard Dutch weave lies in the thicker warp wires and less weft wires.
Anping Chongguan Wire Mesh Products Co., Ltd. Is a production-oriented enterprise, located in Anping, Hebei, China. Our welded mesh factory was built in 1998. Through many years of researching, technical improvement and continual expansion of production capacity, our welded mesh factory upgraded to Anping Chongguan Wire Mesh Products Co., Limited in year of 2014.
Our main products are welded mesh, wire mesh, fence, steel grating, wire mesh, galvanized wire, filter material, wire mesh conveyor belt, gabion, cages, perforated metal sheet and expanded metal sheet.
Production capacity: Starting from the production of welded wire mesh, after several years of continuous growth, it ranks first in the same industry in the country. It can produce 8 kilometers of isolation grids per day, 7 tons of razor barbed wire, 20, 000 square meters of welded meshes and 18 tons of steel grating (1, 000 square meters).
Quality and reputation, which is the base of long term cooperation, it is emphasized by Chongguan, so that we earned very good reputation among our customers. Through many years of producing and exporting mesh products, we know different process make products different characters. According to customers special request, we can supply the best and suitable products by our 100% endeavor. We sincerely hope to establish a good relationship with all friends based on mutual benefit. Please focus on us, and believe we can do better
