Audited Supplier
Construction hoist SC200
24 Hours
1 Year
Guide Tracked
＞3T
40M/Min - 60M/Min
Construction Hoist
Wire Rope
Electric Motor
Articulated Lift
Without Attendant
With Deceleration Device
Sider Door
New
Hydraulic
CE
Construction Usage
MINGWEI
Nacked
China
8624200
Product Description
2t Double Cage Building Construction Lifter
| Product Description |
Main Parameters of Construction Lift
1. High quality of motor, low noise
2. Strong load ability, low voltage start
3. Reasonable optimization design, compact structure, convenient installation and debugging
4. Running the lift elevator before the delivery
5. Driving mechanism refueling debugging, no need to refuel at site
6. Selects the high quality gear reducer and anti dropping device
>>> 1. Steel Parts for Building Construction Hoist
2. Strong load ability, low voltage start
3. Reasonable optimization design, compact structure, convenient installation and debugging
4. Running the lift elevator before the delivery
5. Driving mechanism refueling debugging, no need to refuel at site
6. Selects the high quality gear reducer and anti dropping device
>>> 1. Steel Parts for Building Construction Hoist
1.1 Mast: 650L*650W*1508H mm 1.2 Main limb: φ76×4.5, Q345B steel 1.3 Frame:
high strength 5mm steel plate bending and welding , with high strength and toughness 1.4 Gear: each mast equipped with 2 pcs of
gear (raw material 60# steel ) 1.5 Locating pin: The surface with filamentous, not easy to fall off, easy to install 1.6 High
stengthen bolts: M24*240 , class 8.8. Each mast equipped with 4 sets of bolts
high strength 5mm steel plate bending and welding , with high strength and toughness 1.4 Gear: each mast equipped with 2 pcs of
gear (raw material 60# steel ) 1.5 Locating pin: The surface with filamentous, not easy to fall off, easy to install 1.6 High
stengthen bolts: M24*240 , class 8.8. Each mast equipped with 4 sets of bolts
>>> 2. Wall Tie for Building Construction Hoist
Every 5 pcs of masts with 1 units of wall tie .
The distance from mast center to building is :1.7-2.1m 1.9-2.5m 2.9-3.6m ;
>>> 3. Cage for Construction Lifter
3.1 Cage: 3000L *1500W * 2200 H mm
3.2 Bottom floor: 4 mm checkered plate
3.3 Top roof: 4 mm checkered plate
3.4 Four sides wall: 6 mm steel plate
3.5 Decorative panel: Punched galvanized sheet, thickness 1.2mm
3.6 Safety device: JAQ4.0, each cage with 1 set of safety device .Above maintenance gate , easy to be maintenance
3.7 Limit switch: each cage has 1 unit
>>>4. Cabin for Construction Lifter
Each cage has 1 unit of cabin
>>>5. Electric Box for Construction Lifter
5.1Each cage with 1 unit of electric box
>>>6. Power Cable for Construction Lifter
Model 3*20mm2 + 2 , Chinese standard cable
>>>7. Operate System for Building Construction Hoist
With weight display , current display , floor display , switch device, lighting device , electrolock device , emergency stop device , bell device , up/down device
| FAQ |
2. What kind of terms of payment? T/T, L/C, D/A,D/P, Western Union are available.
3. Quotation request:
If you are interested in our products, please provide the following parameters:
1).Lift height(m)2).Load capacity (kg)
3). Double cage or single cage
4).Local power supply (kV, Hz)
5).Other special equipments
We will provide best price once confirmed the above.
