Audited Supplier
Electric hydraulic marine Mooring anchor crane winch/tugger winch
OEM and ODM accept;
Customizable;
The Electric hydraulic marine Mooring anchor crane winch is used for ship mooring storage rope and towing cargo.
The Hydraulic winch is composed of a drum wall frame device, a rope arrangement device, a hydraulic brake device and a diesel oil pump unit.Now the main part of the structure is described as follows.
Drum part
The drum is set on the support shaft, the support shaft is installed in the bearing of the two wall frames, the big gear and the drum are connected with bolts, the hydraulic motor drives the clutch to rotate, the clutch teeth are engaged with the pinion teeth, the pinion drives the big gear to rotate, so that the drum can rewind and release the cable, the drum hydraulic brake belt is used for the brake of the drum.
Hydraulic brake device
Hydraulic brake adopts belt structure, riveted by steel belt and braided belt, connected with brake cylinder push rod through swivel arm, under the action of cylinder spring, brake belt is normally closed, when the cylinder is connected with pressure oil, the cylinder pushes the swivel arm to loosen the brake belt, and the winch can work normally. When the pressure oil is unloaded, the cylinder spring makes the swivel arm turn, and the brake belt automatically shuts down. The hydraulic brake is equipped with a manual rotary screw, and the manual screw can be used to adjust the tightness of the brake in special circumstances.
Fork shifting device
Fork device is composed of fork, shaft, such as stents, turning fork handle drives the tiger tooth clutch, clutch on-off, handle using bolt to prevent loosening of the clutch.
Hydraulic actuator
The hydraulic transmission device is composed of a hydraulic motor and a planetary gear reducer, the output end of the hydraulic transmission device is installed with pinion, the hydraulic transmission device is equipped with a one-way balance valve and safety valve, one-way balance valve to prevent the winch in the external force to lower the cable, the winch appears excessive speed and system impact phenomenon, The impact load can also play a buffer role, the safety valve plays an overload protection role on the hydraulic motor, and the system displacement is changed by the manual valve to achieve the winch speed adjustment
Diesel oil pump unit
The pump station is driven by diesel engine, the diesel engine is connected with the transfer box, the output end of the transfer box is installed JG160 and JG25 two oil pumps, JG160 oil pump is used to drive the winch drum, JG25 pump is used to drive the brake cylinder, the oil tank and the diesel engine, the transfer box is installed on the common base, the oil tank has the liquid level temperature gauge, the air filter and the return oil filter.
Main technical parameters
| Name | 600kN Hydraulic winch |
| Rated load | 600kN (1st layer) |
| Support load | 1800kN (1st layer) |
| Rated speed | 3m/min (1st layer) |
| Cable diameter | φ38 |
| Rope capacity | 2000m |
| Number of rope layers | 14 |
| System pressure | 17MPa |
| Hydraulic transmission device | XHS3Z56-28000 |
| Total displacement | q = 27636ml/r, |
| Rated torque | 75000N.m |
| Diesel engine | 6105ZD |
| Power rate | 84kw |
| Speed | 1500rpm |
Main specification and parameters for hydraulic mooring winch
| Model | Rated pull (KN) | Rated Speed(m/min) | Drum Capacity(m) | Motor Power(kW) |
| 10KN hydraulic winch | 10 | ≥12 | Φ11×150 | 5.5 |
| 20KN hydraulic winch | 20 | ≥12 | Φ15×150 | 11 |
| 40KN hydraulic winch | 40 | ≥15 | Φ17.5×151 | 22 |
| 50KN hydraulic winch | 50 | ≥15 | Φ20.5×152 | 30 |
| 75KN hydraulic winch | 75 | ≥15 | Φ26×153 | 45 |
| 100KN hydraulic winch | 100 | ≥12 | Φ30×200 | 45 |
| 160KN hydraulic winch | 160 | ≥12 | Φ32×250 | 75 |
| 200KN hydraulic winch | 200 | ≥9.6 | Φ41×250 | 75 |
| 250KN hydraulic winch | 250 | ≥9.6 | Φ44.5×250 | 90 |
| 315KN hydraulic winch | 315 | ≥7.8 | Φ52×250 | 90 |
| 400KN hydraulic winch | 400 | ≥7.8 | Φ56×250 | 110 |
| 450KN hydraulic winch | 450 | ≥6 | Φ56×250 | 110 |
| 500KN hydraulic winch | 500 | ≥6 | Φ58×250 | 110 |
| 560KN hydraulic winch | 560 | ≥6 | Φ64×250 | 132 |
| 600KN hydraulic winch | 600 | ≥6 | Φ64×250 | 132 |
| 650KN hydraulic winch | 650 | ≥5 | Φ70×250 | 132 |
| 1000KN hydraulic winch | 1000 | ≥4 | Φ85×250 | 132 |
| 1200KN hydraulic winch | 1200 | ≥4 | Φ95×250 | 160 |
| 1500KN hydraulic winch | 1500 | ≥4 | Φ95×250 | 200 |
| 1800KN hydraulic winch | 1800 | ≥4 | Φ95×250 | 250 |
| 2000KN hydraulic winch | 2000 | ≥4 | Φ100×250 | 270 |
Operating procedure
1.Precautions before work
The following checks should be made before each work of the winch to ensure that there is no fault before it can work.
1.1 Check the lubrication of bearings and other places to ensure that the moving parts have good lubrication conditions.
1.2 Check for obstacles near the winch.
1.3 Check whether the fastening bolts of each winch component are loose.
2. Winch work
Control the manual proportional direction valve to rewind the cable.
2.2 After the cable is retracted
Manual proportional direction valve middle.
2.3 Laying Cables
Operate the manual proportional direction valve to release the cable.
2.4 After releasing the cable
Manual proportional direction valve middle.
Packing&Shipping
Certification
Cooperation
We start from meeting each other, visiting factories, discussing requirements, giving solutions, confirming orders, discussing details and completing deliveries. We became not only business partners but also friends in life, it was a pleasant and meaningful journey.
How to select a winch?
It is important to know the intended application of your winch requirement. Below, you will find a general list of topics that we will discuss to accurately manufacture a winch to your specifications.
1. Where are you planning to use your winch?
2. What type of winch are you interested in? Electric winch, hydraulic winch, or diesel oil winch?
3. How much pulling power do you need for the winch? ( KN )
4. How long is the rope capacity of the winch drum? (m)
5. What speed do you expect the wire rope/cable to pull at? ( m/min )
6. What are your environmental conditions?
7. What classification does your winch require? CCS, ABS, Bureau Veritas, Lloyd's?
FAQ
1.Are you a manufacturer?
Yes, we operate a factory staffed with skilled technicians on-site, complemented by our trading company.
2.Is your products customized?
Yes, because of the different working condition, all our products are customized depending on detail requirement! So if you give us more information about the lift capacity, span, lift height, power source and other specials, we will give you a very quick quote!
3.What's the information should I provide when inquiry?
The more information you provide, the more accurate solution we can prepare for you! The information such as the lifting capacity, span, lifting height,power source or other specials you give us will be more appreciated.It would be better if we had drawings.
4.What are the MOQ and payment terms?
Our MOQ is just one set, and we accept T/T and L/C at sight, with other terms open for negotiation.
5.How do you guarantee the quality?
Before shipment, we will do a series of inspections and tests, and have a detailed tracking report, you can also through the domestic testing company agent testing, or you personally or send a delegation to track the testing process, it is ok.
6.How can we install the winch?
We will provide detailed installation instructions,and our senior engineers are available to provide online installation guidance and training, as well as providing installation guidance services and training at your location.
