Audited Supplier
COP-50
CE
Cooking Oil, Frying Oil, Vegetable Oil, Edible Oil,etc.
380V,50Hz, 3 Phase (or as Needed)
50 L/min
Vacuum
Vacuum
Suction Filter
<=0.4MPa
New
Customizable
75kw
75kw
<=50ppm
<=0.1%
TOP Oil Purifier
International Standard in Wooden Case
100*1150*1700mm
Chongqing, China
84212990
Product Description
3000L/H Deep Fryer Oil Used Cooking Oil Filter Machine(COP-50)
Application:
COP oil filtration machine is special for filtering waste cooking oil, dirty vegetable oil, trench oil, swill oil and animal oil etc., it effectively and completely removes particles, odor, water, acid and alcohol etc. From waste oil. The treated oil is clean, limpidity, and good smell. COP is a good purification machine for Fry food factory, oil restaurant, cooking oil factory, vegetable oil factory, and waste oil collecting store. According to the treated oil usages, we can choose different machine body. For edible usage, we suggest to choosing stainless steel body; For industrial, we suggest to choose steel carbon body. According to different working place, we recommend Skid type and mobile type (Trailer with pneumatic tyre)
Features:
1. This plant composed by two parts, one is the press filter, and other one is the vacuum oil purifier system. The press filter can remove the big and tiny impurity; The precision of purification can reach to 1 Micro. The Vacuum system equips three grades filter (primary filter, mass water separator, and fine filer). All process works under the vacuum condition.
2. For the primary filter, which is made of the stainlessness steel, it is anti-rust and anti-corrupt, it mainly removes the residual impurity which escape from the press filter, making sure the oil have not any impurity when it goes into the water separator and vacuum separator.
3. The water separator, which equips the special filter, which mainly remove the mass water from the oil, because usually the waste cooking oil always contains much water, so we need remove the mass from the oil. After the water separator, the oil just contains the tiny water and soluble water.
4. After the process of the water separator, the oil will goes into the vacuum separator, which adopts three-dimensional duplex evaporation and film evaporation. For protecting the oil nature, it is better that the oil temperature is lower than 80 C, Because our machine works under the vacuum and low pressure condition, so it don't need heat the oil to 100 C, usually it just need heat the oil to 45 C, Then it can remove the tiny water, soluble water, acid, alcohol and other volatility liquid and so on completely and effectively.
5. The fine filer, which is equips the stainlessness steel filter, the purification hole is less then 1 Micro, which can make sure the oil is completely clear, no any impurity.
Technical parameters:
Guarantee Value:
Detailed Image:
Parts in Details:
Trailer Available(Optional)
About Us:
Located at Chongqing city--a southwest electromechanical manufacturing center as well as national municipality, Chongqing TOP is a professional leading manufacturer and supplier of oil purifiers and various related testers. Our company consists of departments respectively for technological development, machinery manufacture, instrument manufacture and quality control etc. On basis of mature development and manufacture technology and highly qualified production management team, the products have high quality, easy operation, excellent performance and long service life.
Our Service:
Pre-sale Service
*Recommend the most suitable machine according customer's demands.
* Professional pre-sale model/configuration selection advise and technical support -- offered by experienced technician.
* Free on-site installation, debugging and technical training -- offered by strictly trained technology application engineers.
*Offer OEM service.
* We guarantee the maintenance time no more than 3 working days and response time within 1 hour.
* We build instrument service profile for our clients to record the product service and maintenance conditions.
* After instruments start service, we will pay follow-ups to collect the service conditions.
Safe and Timely Transportation
*Standard export wooden case with high quality cushioning material ensures that the customers get the item in good condition.
*Carefully check every packing detail before delivery to avoid any troubles during the transportation.
*Appointed logistics company could be used according to customers demands.
* Do our best to make sure customers can get their goods in time.
Application:
COP oil filtration machine is special for filtering waste cooking oil, dirty vegetable oil, trench oil, swill oil and animal oil etc., it effectively and completely removes particles, odor, water, acid and alcohol etc. From waste oil. The treated oil is clean, limpidity, and good smell. COP is a good purification machine for Fry food factory, oil restaurant, cooking oil factory, vegetable oil factory, and waste oil collecting store. According to the treated oil usages, we can choose different machine body. For edible usage, we suggest to choosing stainless steel body; For industrial, we suggest to choose steel carbon body. According to different working place, we recommend Skid type and mobile type (Trailer with pneumatic tyre)
Features:
1. This plant composed by two parts, one is the press filter, and other one is the vacuum oil purifier system. The press filter can remove the big and tiny impurity; The precision of purification can reach to 1 Micro. The Vacuum system equips three grades filter (primary filter, mass water separator, and fine filer). All process works under the vacuum condition.
2. For the primary filter, which is made of the stainlessness steel, it is anti-rust and anti-corrupt, it mainly removes the residual impurity which escape from the press filter, making sure the oil have not any impurity when it goes into the water separator and vacuum separator.
3. The water separator, which equips the special filter, which mainly remove the mass water from the oil, because usually the waste cooking oil always contains much water, so we need remove the mass from the oil. After the water separator, the oil just contains the tiny water and soluble water.
4. After the process of the water separator, the oil will goes into the vacuum separator, which adopts three-dimensional duplex evaporation and film evaporation. For protecting the oil nature, it is better that the oil temperature is lower than 80 C, Because our machine works under the vacuum and low pressure condition, so it don't need heat the oil to 100 C, usually it just need heat the oil to 45 C, Then it can remove the tiny water, soluble water, acid, alcohol and other volatility liquid and so on completely and effectively.
5. The fine filer, which is equips the stainlessness steel filter, the purification hole is less then 1 Micro, which can make sure the oil is completely clear, no any impurity.
Technical parameters:
| Parameters | Unit | COP-10 | COP-20 | COP-30 | COP-50 | COP-100 | COP-150 | COP-200 | COP-300 |
| Flow Rate | L/min | 10 | 20 | 30 | 50 | 100 | 150 | 200 | 300 |
| Working Vacuum | MPa | -0.06 ~ -0.095 | |||||||
| Working Pressure | MPa | ≤0.4 | |||||||
| Temperature Range | ºC | 0 ~ 100 | |||||||
| Power supply | 380V,50Hz, 3 phase (or as needed) | ||||||||
| Working noise | dB(A) | ≤75 | ≤75 | ≤75 | ≤78 | ≤78 | ≤78 | ≤80 | ≤82 |
| Heating power | KW | 36 | 40 | 45 | 72 | 80 | 90 | 120 | 135 |
| Total power | KW | 38 | 42 | 47 | 75 | 87 | 101 | 135 | 147 |
| Inlet/outlet | mm | 25 | 25 | 25 | 32 | 42 | 50 | 50 | 60 |
| Net weight | Kg | 450 | 550 | 600 | 750 | 850 | 1000 | 1200 | 1500 |
| Overall dimensions | mm | 1500 ×1000 ×1200 | 1500 ×1050 ×1600 | 1500 ×1050 ×1650 | 1600 ×1150 ×1700 | 1750 ×1250 ×1800 | 1900 ×1600 ×1950 | 1900 ×1700 ×2000 | 2100 ×1700 ×2100 |
Guarantee Value:
| Item | Guarantee indexes |
| Moisture content | ≤50 PPM |
| Demulsification value | New oil≤15min,running oil≤30min |
| Impurity size | ≤1 micron (no free carbon) |
| Gas content | ≤0.1% |
| Clean degree | ≤4 Grade (NAS1638) |
Detailed Image:
Parts in Details:
Trailer Available(Optional)
About Us:
Located at Chongqing city--a southwest electromechanical manufacturing center as well as national municipality, Chongqing TOP is a professional leading manufacturer and supplier of oil purifiers and various related testers. Our company consists of departments respectively for technological development, machinery manufacture, instrument manufacture and quality control etc. On basis of mature development and manufacture technology and highly qualified production management team, the products have high quality, easy operation, excellent performance and long service life.
Our Service:
Pre-sale Service
*Recommend the most suitable machine according customer's demands.
* Professional pre-sale model/configuration selection advise and technical support -- offered by experienced technician.
* Free on-site installation, debugging and technical training -- offered by strictly trained technology application engineers.
*Offer OEM service.
After-sale Service
* The warranty period is 24 months from commissioning acceptance date on. After the warranty period is over we provide lifelong maintenance and technical service.* We guarantee the maintenance time no more than 3 working days and response time within 1 hour.
* We build instrument service profile for our clients to record the product service and maintenance conditions.
* After instruments start service, we will pay follow-ups to collect the service conditions.
Safe and Timely Transportation
*Standard export wooden case with high quality cushioning material ensures that the customers get the item in good condition.
*Carefully check every packing detail before delivery to avoid any troubles during the transportation.
*Appointed logistics company could be used according to customers demands.
* Do our best to make sure customers can get their goods in time.
