Barrier Gate Radar Detector Sensor for Parking Boom Barrier Gate Control

Price $56.00 Compare
Min Order 2 Pieces
Shipping From Guangdong, China
Popularity 210 people viewed
Quantity
+-
 

IDeal Intelligent Technology Co., Ltd.

VIP   Audited Supplier 11 years
Profile Certified by SGS/BV
IDL-VBR10B
Ultrasonic
Microwave System
Vehicles/Pedestrians Detection
Home, Communication Electronic Products, Industry, Special Equipment, Traffic, Car/Motorcycle
Anti-Hitting, Trigger
CE, Rosh, Ukca
DC12V 150mA
24G
Fmcw
1 to 6 Meters
-40~+85 Degree
IP67
IDL
Standard Neutral Package or Customers Requirement
131mm*106mm*28.5mm
China
Product Description
Product Description

The vehicle detector adopts 24GHz monolithic transceiver chip from Germany and multi-layer composite PCB antenna. Due to its high integration, high bandwidth and low noise, its working spectrum and measurement accuracy are stable and it can be used for barrier with straight arm to avoid any hitting.
 

Product Parameters

1) Input Voltage: DC12V  200mA
2) Working Frequency: 24GHz
3) Modulation Mode: FMCW
4) Sending Power: 10-12dBm
5) Horizontal Beam: <35°
6) Vertical Beam: <17°
7) Detection Distance: 1 - 6 meters, ±0.1 meters
8) Working Temperature: -40ºC~+85ºC
9) Protection Level: IP67

 

Detailed Photos

Certifications


 

Installation Instructions

 1) The trigger radar and the anti-smash radar should be installed perpendicular to the lane's direction. The anti-smash radar is installed on the cabinet below the barrier pole. The trigger radar is installed on the special bracket for the radar installation. The optimal height from the ground to the radar center is 0.6 meters.

 2) The barrier's cabinet must be fixed firmly to avoid shaking when the barrier is working.

 3) Within the detection area, there should be no obstacles other than the barrier pole, e.g. traffic cones, isolation bars, signs, etc..

 4) Please update the radar background in time after the environment in the detecting area is changed.
 

Our Advantages

 Are you still troubled to install loop detector and loops?

1) Cutting ground-Waste time and not good looking;
2) Complex wiring-Messy and Difficult;

3) Mud road-Cannot fix the loop;

4) Cannot detect big truck, trailer or other vehicles with high-bed.

 

Why choose barrier radar detector?

1) Can replace loop detector completely; no wiring layout, save time and cost.

2) Easy installation; Easy parameters setting; Adjustable distance from 1 to 6m.

3) Work in range of 24-24.5Ghz without effects from any climatic environment.

4) Can effectively distinguish vehicles and humans to avoid any hitting.

5) Can be used for trigger detection, e.g. trigger camera to capture the picture.

6) Can be used to trigger the alarm in the warning zone.

7) Can record the traffic and no data is lost when power is off.
 

Wiring Definition

 

Color

Definition

Red

Power Input +12VDC

Black

Power Input GND

Blue

Relay Output COM 

Green

Relay Output NC 

Purple

Function Switch Input

Brown

Function Switch Input Ground

White

Relay Output COM

Yellow

Relay Output NO

 
More Applications









Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA