30HP HP air cooled water chiller is usually a 20rt chiller to 25rt chiller with scroll compressor. The 30HP air cooled chillers are widely used in plastic processing cooling water system. Chiller for Plastic pipe extrusion lines also called extrusion chiller, extrusion cooling water system. Chiller for extruder can use air cooled chiller or water cooled chiller. If you are looking for Plastic extrusion moulding chillers, please contact us to get your best cooling water chiller systems.
Air cooled water chiller is a hot selling type of industrial cooling system. The 20HP industrial chiller is air cooled scroll type water chiller. Air cooled water chillers are refrigeration systems that use air as the cooling medium to remove heat from the water or process fluid. These chillers consist of a compressor, condenser, evaporator, expansion valve, and other components that work together to provide cooling. The compressor compresses the refrigerant, which then flows through the condenser where it releases heat to the surrounding air. The cooled refrigerant then enters the evaporator, where it absorbs heat from the water or process fluid, cooling it down. The refrigerant then goes through the expansion valve, where its pressure is reduced, and the cycle repeats.
The advantage of air cooled water chillers is that they do not require a separate cooling water source or cooling tower, making them more convenient for installation in various locations. They are suitable for applications where water availability is limited or where it is not feasible to install water cooling infrastructure. Air cooled chillers also eliminate the need for water treatment and reduce water consumption, resulting in cost savings and environmental benefits. Moreover, they offer flexibility in installation as they can be placed indoors or outdoors, provided there is sufficient airflow for heat dissipation.
However, compared to water cooled chillers, air cooled chillers may have slightly lower efficiency due to the higher ambient air temperature affecting the condensing process. Additionally, they may require larger condenser surface area and fans to ensure adequate heat dissipation. Nonetheless, advancements in technology have improved the efficiency and performance of air cooled water chillers, making them a viable and practical cooling solution for various industrial, commercial, and HVAC applications.
20HP air cooled chiller for industry use is the Hot selling air cooled chiller. It's widely used for cooling the injection molding machine.

Chiller is a kind of water cooling equipment that can provide constant temperature, constant flow and constant pressure. The principle of the chiller is to inject a certain amount of water into the internal water tank of the machine, cool the water through the chiller refrigeration system, and then use the water pump inside the machine to inject low-temperature frozen water into the equipment that needs to be cooled. The chilled water transfers the heat inside the machine. Take it away and return the high-temperature hot water to the water tank for cooling. This cycle exchanges cooling to achieve the cooling effect of the equipment.
The Oumal Portabla air cooled chiller is a type of small chiller. It's an air cooled scroll chiller. It uses scroll compressor, Oumal chiller use high quality famous brand new compressor for the portable chiller. This 3 HP portable air cooled chiller use Copeland compressor or Panasonic compressor ( Other brands optional) . The chiller build in pumps and water tank, It's easy to installation and use. The condenser use High-efficiency copper tubes plus clear aluminum sheets, high-quality anti-corrosion. The fan adopts a large air volume external rotor fan. Evaporator use tank with copper coil or SS coil. 304 SS / 316SS Plate heat Exchanger or shell and tube evaporator or Titanium tube optional, Water tank is optional for you. If you have a external water tank, we will not build in the chiller. The Electric parts for the chiller use high quality brand. Mircro-computer Punp control panel make the chiller easy to use (Remote Control also optional ). Chiller build in wheels that made the chiller easy to move. High-quality brand refrigeration accessories make the chiller work more stably and have a longer life.
More Pictures of the small air cooled Water Chiller :


Air-cooled chiller product features:
1. The compressor of this unit adopts a scroll-type fully enclosed compressor and electronic control components, and is equipped with a condenser and evaporator made of high-efficiency and high-quality copper tubes for heat exchange.
2. Equipped with various safety protection devices, it has stable performance, low noise, long service life and simple operation; it adopts LCD display human-machine interface, which makes operation simple and convenient, and the operating status is clear at a glance.
3. This model adopts a single compressor or multi-compressor combined refrigeration system. The compressors can automatically run alternately according to load changes, balancing the operating hours of each compressor to save energy and extend the service life of the chiller. Energy adjustment is convenient, and partial load is more energy-saving.
4. The whole machine shell has beautiful appearance and compact structure. The operation of the unit can be checked at any time; the unit can provide its own water tank and circulating water pump according to the cooling capacity, without the need for cooling towers and cooling water pumps, making installation and maintenance easy.

1. Chemical industry: such as chillers for electroplating factories, chillers for plastic products factories; food and beverage industry: breweries, pharmaceutical industry, etc.; chemical plants: petrochemical industry, fine chemical manufacturing industry, etc.
2. Mechanical processing manufacturing industry
3. Electronic and electrical industry
4. Automobile manufacturing industry
5. Textile printing and dyeing industry
The 2 Ton Portable air cooled chiller is highly used in plastic molding machines, bottle blowing machines, printing machines.....

Products Specifications
Model Item | OMC-1A | OMC-2A | OMC-3A | OMC-5A | OMC-8A | OMC-10A | OMC-15A | OMC-20A | OMC-25A | OMC-30A | OMC-40A | ||
Cooling Capacity | KW | 2.7 | 5.4 | 8.1 | 13.5 | 21.6 | 27 | 40.5 | 54 | 67.5 | 81 | 108 | |
Kcal/h | 2322 | 4644 | 6966 | 11610 | 18576 | 23220 | 34830 | 46440 | 58050 | 69660 | 92880 | ||
Ton | 0.8 | 1.5 | 2.3 | 3.8 | 6.1 | 7.7 | 11.5 | 15.4 | 19.2 | 23.0 | 30.7 | ||
Btu/h | 9215 | 18430 | 27645 | 46075 | 73720 | 92150 | 138225 | 184300 | 230375 | 276451 | 368601 | ||
Input Power | KW | 1.4 | 2.1 | 2.8 | 5 | 7.3 | 9.2 | 14 | 18 | 22 | 28 | 36 | |
Power supply | 1PH-220V 50Hz | 3PH-380V 50Hz | |||||||||||
Temperature Range | ºC | 5-35 | |||||||||||
Refrigerant | Type | R22(R407C/R410A/R134A) | |||||||||||
Compressor | Control Mode | Capillary | Expansion Valve | ||||||||||
Type | Piston Type / Scroll Type | ||||||||||||
Power | KW | 0.75 | 1.5 | 2.2 | 4 | 6 | 7.5 | 11 | 15 | 18.5 | 22 | 30 | |
Chilled water | Tank Volume | L | 25 | 30 | 60 | 65 | 150 | 180 | 300 | 400 | 400 | 540 | 630 |
Tank Material | SUS304 Stainless Steel | ||||||||||||
Pipe Diameter | inch | 1/2 | 3/4 | 3/4 | 1 | 1-1/2 | 1-1/2 | 2 | 2 | 2-1/2 | 2-1/2 | 3 | |
Pump | Lift | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | |
Power | 0.37 | 0.37 | 0.37 | 0.75 | 1.1 | 1.5 | 1.5 | 2.2 | 2.2 | 4 | 4 | ||
Evaporator | Type | Tank with coil(Shell and Tube) | |||||||||||
Chilled Water Flow | m³/h | 0.5 | 0.9 | 1.4 | 2.3 | 3.7 | 4.6 | 7.0 | 9.3 | 11.6 | 13.9 | 18.6 | |
Condenser | Type | High efficiency copper condensing coil with Aluminum+Spiral axial flow fan | |||||||||||
Cooling Air Flow | m³/h | 1000 | 2000 | 3000 | 5000 | 8000 | 10000 | 15000 | 20000 | 25000 | 30000 | 40000 | |
Safety Protection | Compressor overheating protection, over-current protection, high and low pressure protection, over-temperature protection, flow protection, reversed and lacking phase protection, exhaust overheating protection. | ||||||||||||
Dimension | Length | mm | 680 | 770 | 1000 | 1120 | 1250 | 1500 | 2080 | 2100 | 2100 | 2300 | 2430 |
Width | mm | 420 | 500 | 480 | 530 | 680 | 770 | 780 | 850 | 850 | 930 | 1185 | |
Height | mm | 850 | 950 | 1100 | 1200 | 1350 | 1400 | 1650 | 1600 | 1700 | 1650 | 1710 | |
Weight | KG | 73 | 95 | 128 | 172 | 300 | 350 | 750 | 850 | 950 | 1080 | 1360 |
Air-cooled chiller is a common industrial cooling equipment with the following advantages:
Independent cooling system: The air-cooled chiller adopts an independent air cooling system and does not require additional cooling water sources or cooling towers. This makes installation and operation relatively simple, saving installation and maintenance costs and space.
Wide range of applications: Air-cooled chillers are suitable for various industrial applications, including plastic processing, refrigeration and air conditioning systems, machining, printing and paper making. They provide reliable cooling for different equipment and processes.
High efficiency and energy saving: The air-cooled chiller adopts air cooling method and uses forced fans to circulate the air and take away the heat. Compared to traditional water-cooled systems, they do not require additional water pumps and cooling towers, thus saving energy and operating costs.
Flexibility and mobility: Since they do not need to be connected to an external cooling water source, air-cooled chillers are more flexible and can be moved to different locations more easily. This is useful for applications that require movement or changes in work location.
Easy maintenance: Compared with water cooling systems, air-cooled chillers are easier to maintain. There is no need to deal with problems such as scale, water treatment and water pump maintenance, reducing the complexity and cost of maintenance work.
Small footprint: Air-cooled chillers have a relatively small footprint as they do not require a cooling tower and water cooling system. This is very advantageous when space is limited.
However, it should be noted that air-cooled chillers may be slightly less efficient than water-cooled systems in heat dissipation efficiency, especially in high-temperature environments. In addition, since air cooling requires the use of fans, noise and vibration may occur. Therefore, when selecting cooling equipment, it is necessary to comprehensively consider the advantages and disadvantages based on specific needs and process requirements, and weigh various factors.


FAQ:
Q1: Could you help us to recommend the model for our project?
A1: Yes, we have engineer to check the details and make the scheme for you. Based on the following:
1)Cooling capacity;
2)chilled water inlet and outlet temperature
3)chilled water flow
4) Refrigerant;
5) Ambient temperature;
6)Voltage;
7) Be used for what industry?
8)Any other special requirements
Q2: How to ensure your product with good quality?
A2: All our products with CE certificate. And use the well-know brand compressors and refrigeration accessories . All OUMAL Chillers are factory tested under load conditions to ensure good quality and easy installation for users.
Q3: What's the warranty?
A3: 15 months warranty for free if confirmed by both side damage in the quality reason.
Q4: What's your payment term?
A4: We accept T/T, LC, Western Union, etc. Normally, 30% deposit for production, 70% balance before shipment.
Q5: Are you a manufacturer?
A5: Yes, we have more than 15 years in water chiller business. Also have patent on the water chiller appearance .
The control box design make the unit safety and stably.
Q6: How can i Place an order
A6: Send inquiry to us or Call us.