Audited Supplier
32-32 3550/2-07400
Standard
Sealed On Both Sides
Single-Row
Triple Row Roller
50mn or 42CrMo
Internal Gear
Lyhy
Available
Since Year 1993
45-50days
in House or Third Party
12months Against Bl
Hb229-269
LYHY
Wooden Box
ISO2001: 9008
China
848210900
Product Description
Triple Row Roller Slewing Bearing
Structure: It usually consists of three rows of raceways with steel rollers as the rolling elements, and it has a double - inner - ring (or double - outer - ring) and a single - outer - ring (or single - inner - ring) structure, along with components like retainers and seals.
Structure: It usually consists of three rows of raceways with steel rollers as the rolling elements, and it has a double - inner - ring (or double - outer - ring) and a single - outer - ring (or single - inner - ring) structure, along with components like retainers and seals.
Materials: The ring materials are typically 42CrMo for large diameter while 50Mn for small diameter. These materials, through advanced metallurgical techniques and specialized heat treatment processes, possess excellent hardness, wear resistance, and fatigue strength.
Ring hardness: HB280-352
Application: heavy construction machinery, wind turbine ,steel plant, shield machines and other heavy equipment.
Ring hardness: HB280-352
Application: heavy construction machinery, wind turbine ,steel plant, shield machines and other heavy equipment.
About LYHY bearings
1.introduction:we are a manufacturer of slewing bearing since 1993, our factory occupies a area of 30000square meters with 4 workshop and 1 office building.
2. Featured products: slewing bearing and slewing drive
3. Capital: Current is 1 million RMB, but we are increasing the capital to 10 million RMB
4. Workers: 40
5. Certificate: ISO9001:2008, 3.1 certificate, CCS certificate, Science and Technology Progress Award
6. Annual Exportation: 8million USD
7. Exported countries: (60)
Asia: India, Pakistan, Iran, Signore, Georgia, Malaysia, Vietnam, Thailand, Philippines, Israel, Korea, UAE, Sri Lanka, Saudi Arabia,
Europe: urkey, Russia, Spain, Czech Republic, Italy, Poland, Slovakia, Bosnia and Herzegovina, Austria, France, Germany, Switzerland, Finland, Ukraine, UK
America: USA, Canada, Mexico, Brazil, Puerto Rico, Peru, Chile
Africa: South Africa, Egypt
Oceania: Australia
1.introduction:we are a manufacturer of slewing bearing since 1993, our factory occupies a area of 30000square meters with 4 workshop and 1 office building.
2. Featured products: slewing bearing and slewing drive
3. Capital: Current is 1 million RMB, but we are increasing the capital to 10 million RMB
4. Workers: 40
5. Certificate: ISO9001:2008, 3.1 certificate, CCS certificate, Science and Technology Progress Award
6. Annual Exportation: 8million USD
7. Exported countries: (60)
Asia: India, Pakistan, Iran, Signore, Georgia, Malaysia, Vietnam, Thailand, Philippines, Israel, Korea, UAE, Sri Lanka, Saudi Arabia,
Europe: urkey, Russia, Spain, Czech Republic, Italy, Poland, Slovakia, Bosnia and Herzegovina, Austria, France, Germany, Switzerland, Finland, Ukraine, UK
America: USA, Canada, Mexico, Brazil, Puerto Rico, Peru, Chile
Africa: South Africa, Egypt
Oceania: Australia
LYHY slewing bearings can be divided into the following types as per their structures:
single row four point contact ball slewing bearing,
single row cross roller slewing bearing,
double row different ball diameter slewing bearing,
three row cylindrical roller slewing bearing and roller/ball combination slewing bearing.
And all these types of slewing bearings can be further divided into bearings without gears, bearings with external gears and bearings with internal gears.
Detailed description of these types slewing bearings
Single row four point contact ball slewing bearings
This kind of slewing bearings can support high dynamic loads, transmitting axial and radial forces simultaneously as well as the resulting tilting moments. Applications of this kind of bearings are hoisting, mechanical handling and general mechanical engineering etc.
Single row cross roller slewing bearings
This kind of bearings can support combinations of large radial force, medium axial force and tilting moment with small or zero clearance. Main applications of this kind of bearings are hoisting and mechanical handling and general mechanical engineering etc.
Double row different ball diameter slewing bearings
This kind of bearings can support high static loads with simple structures. They are mainly used in situations with variation load position and direction and continuously rotating. Main applications of this kind of bearings are deck hoisting, mining and material handling etc.
Triple row cylindrical roller slewing bearings
This kind of bearings has high load carrying capacity. Under same loads, this kind of bearings has much smaller diameters which can make the installation much compact, as different kinds of loads are supported by different races and rollers. Main applications of this kind of bearings are hoisting, mechanical handling, mining and materials handling, offshore technology and general mechanical engineering etc.
Roller/ball combination slewing bearings
This kind of bearings can support high axial load and low tilting moments. Usually they are large diameter slewing bearings. Applications of this kind of bearings are mining and materials handling etc.
| single row ball slewing ring bearing | ||
| untoothed | external toothed | internal toothed |
| 10-16 0100/0-08000 | 11-16 0100/1-08100 | |
| 10-16 0200/0-08010 | 11-16 0200/1-08110 | |
| 10-16 0300/0-08020 | 11-16 0300/1-08120 | |
| 10-16 0400/0-08030 | 11-16 0400/1-08130 | |
| 10-16 0500/0-08040 | 11-16 0500/1-08140 | |
| 10-16 0100/0-08003 | 11-16 0100/1-08103 | |
| 10-16 0200/0-08013 | 11-16 0200/1-08113 | |
| 10-16 0300/0-08023 | 11-16 0300/1-08123 | |
| 10-16 0400/0-08033 | 11-16 0400/1-08133 | |
| 10-16 0500/0-08043 | 11-16 0500/1-08143 | |
| 10-20 0311/0-02002 | 11-20 0311/1-02102 | 12-20 0311/1-02202 |
| 10-20 0411/0-02012 | 11-20 0411/1-02112 | 12-20 0411/1-02212 |
| 10-20 0541/0-02022 | 11-20 0541/1-01222 | 12-20 0541/1-02222 |
| 10-20 0641/0-02032 | 11-20 0641/1-02132 | 12-20 0641/1-02232 |
| 10-20 0741/0-02042 | 11-20 0741/1-02142 | 12-20 0741/1-02242 |
| 10-20 0841/0-02052 | 11-20 0841/1-02152 | 12-20 0841/1-02252 |
| 10-20 0941/0-02062 | 11-20 0941/1-02162 | 12-20 0941/1-02262 |
| 10-20 1091/0-02072 | 11-20 1091/1-02172 | 12-20 1091/1-02272 |
| 10-20 0311/0-02003 | 11-20 0311/1-02103 | 12-20 0311/1-02203 |
| 10-20 0411/0-02013 | 11-20 0411/1-02113 | 12-20 0411/1-02213 |
| 10-20 0541/0-02023 | 11-20 0541/1-01223 | 12-20 0541/1-02223 |
| 10-20 0641/0-02033 | 11-20 0641/1-02133 | 12-20 0641/1-02233 |
| 10-20 0741/0-02043 | 11-20 0741/1-02143 | 12-20 0741/1-02243 |
| 10-20 0841/0-02053 | 11-20 0841/1-02153 | 12-20 0841/1-02253 |
| 10-20 0941/0-02063 | 11-20 0941/1-02163 | 12-20 0941/1-02263 |
| 10-20 1091/0-02073 | 11-20 1091/1-02173 | 12-20 1091/1-02273 |
| 10-25 0455/0-04010 | 11-25 0455/1-04110 | 12-25 0455/1-04210 |
| 10-25 0555/0-04020 | 11-25 0555/1-04120 | 12-25 0555/1-04220 |
| 10-25 0655/0-04030 | 11-25 0655/1-04130 | 12-25 0655/1-04230 |
| 10-25 0755/0-04040 | 11-25 0755/1-04140 | 12-25 0755/1-04240 |
| 10-25 0855/0-03010 | 11-25 0855/1-03110 | 12-25 0855/1-03210 |
| 10-25 0955/0-03020 | 11-25 0955/1-03120 | 12-25 0955/1-03220 |
| 10-25 1055/0-03030 | 11-25 1055/1-03130 | 12-25 1055/1-03230 |
| 10-25 1155/0-03040 | 11-25 1155/1-03140 | 12-25 1155/1-03240 |
| 10-25 1255/0-03050 | 11-25 1255/1-03150 | 12-25 1255/1-03250 |
| 10-25 1355/0-03060 | 11-25 1355/1-03160 | 12-25 1355/1-03260 |
| 10-25 1455/0-03070 | 11-25 1455/1-03170 | 12-25 1455/1-03270 |
| 10-12 0120/0-03659 | 11-50 1900/2-06400 | 12-50 1800/2-06500 |
| 10-16 0179/0-06672 | 11-50 2130/2-06410 | 12-50 2000/2-06510 |
| 10-20 0222/0-03351 | 11-50 2355/2-06420 | 12-50 2240/2-06520 |
| 10-12 0222/0-02710 | 11-50 2645/2-06430 | 12-50 2490/2-06530 |
| 10-20 0260/0-02448 | 11-16 0188/2-01707 | 12-50 2800/2-06540 |
| 10-22 0308/0-00270 | 11-16 0235/1-01933 | 12-16 0288/1-00306 |
| 10-16 0325/0-03997 | 11-25 0309/1-03312 | 12-16 0344/2-01873 |
| 10-25 0371/0-00181 | 11-25 0537/1-05677 | 12-16 0420/1-00728 |
| 10-25 0380/0-03908 | 11-22 0635/2-03924 | 12-22 0782/2-01218 |
| 10-22 0404/0-04475 | 11-32 0675/2-03771 | 12-22 0850/2-01501 |
| 10-32 0474/0-03498 | 11-25 0693/2-04976 | 12-25 08892/2-04951 |
| 10-32 0550/0-05642 | 11-25 0716/1-04864 | 12-32 1128/2-04945 |
| 10-32 0574/0-05823 | 11-32 0823/2-02613 | 12-22 1131/2-01601 |
| 10-32 0675/0-05584 | 11-32 0957/2-05549 | 12-32 1159/2-01512 |
| 10-32 0680/0-00928 | 41-20 0969/2-05532 | 12-32 1384/2-04719 |
| 10-32 0780/0-00367 | 41-32 1160/2-00991 | 12-32 1400/2-04953 |
| 11-40 1298/2-00767 | 12-32 1582/2-04505 | |
| 11-32 1600/1-02300 | ||
| 11-25 1845/1-03705 | ||
| triple row roller slewing ring bearing | |
| external toothed | internal toothed |
| 31-20 1250/2-06700 | 32-20 1250/2-06750 |
| 31-20 1400/2-06710 | 32-20 1400/2-06760 |
| 31-20 1600/2-06720 | 32-20 1600/2-06770 |
| 31-20 1800/2-06730 | 32-20 1800/2-06780 |
| 31-20 2000/2-06740 | 32-20 2000/2-06790 |
| 31-25 1800/2-06800 | 32-25 1800/2-06850 |
| 31-25 2000/2-06810 | 32-25 2000/2-06860 |
| 31-25 2240/2-06820 | 32-25 2240/2-06870 |
| 31-25 2500/2-06830 | 32-25 2500/2-06880 |
| 31-25 2800/2-06840 | 32-25 2800/2-06890 |
| 31-32 2240/2-07300 | 32-32 2240/2-07360 |
| 31-32 2500/2-07310 | 32-32 2500/2-07370 |
| 31-32 2800/2-07320 | 32-32 2800/2-07380 |
| 31-32 3150/2-07330 | 32-32 3150/2-07390 |
| 31-32 3550/2-07340 | 32-32 3550/2-07400 |
| 31-32 4000/2-07350 | 32-32 4000/2-07410 |
| 31-40 2800/2-07420 | 32-40 2800/2-07470 |
| 31-40 3150/2-07430 | 32-40 3150/2-07480 |
| 31-40 3550/2-07440 | 32-40 3550/2-07490 |
| 31-40 4000/2-07450 | 32-40 4000/2-07500 |
| 31-40 4500/2-07460 | 32-40 4500/2-07510 |
| 31-50 3150/2-07520 | 32-50 3150/2-07560 |
| 31-50 3550/2-07530 | 32-50 3550/2-07570 |
| 31-50 4000/2-07540 | 32-50 4000/2-07580 |
| 31-50 4500/2-07550 | 32-50 4500/2-07590 |
| 31-50 4750/2-07555 | 32-50 4750/2-07595 |
| double row axial ball slewing ring bearing | ball roller combination slewing ring | |
| external toothed | internal toothed | external toothed |
| 81-40 2240/2-07600 | 82-40 2199/2-07625 | 51-32 3550/2-06900 |
| 81-40 2619/2-07605 | 82-40 2622/2-07630 | 51-32 3750/2-06905 |
| 81-40 2795/2-07610 | 82-40 2950/2-07635 | 51-32 4000/2-06910 |
| 81-40 2915/2-07615 | 82-40 3300/2-07640 | 51-32 4250/2-06915 |
| 81-40 3150/2-07620 | 82-50 2559/2-06970 | 51-40 4250/2-06920 |
| 81-50 2987/2-06940 | 82-50 3040/2-06975 | 51-40 4500/2-06925 |
| 81-50 3167/2-06945 | 82-50 3520/2-06980 | 51-40 4750/2-06930 |
| 81-50 3347/2-06950 | 82-50 3839/2-06985 | 51-40 4900/2-06935 |
| 81-50 3567/2-06955 | ||
| 81-50 3747/2-06960 | ||
| 81-50 4140/2-06965 | ||
Production Process of LYHY slewing bearings
Quality Control Process of LYHY slewing bearings
Receiving Inspection(forging inspection)
- Inspect the Raw Materials: Check the quality certificates of the raw materials such as steel plates and forgings to ensure that they meet the specified requirements. Examine the surface quality of the materials for any defects like cracks, scars, or pits. Conduct chemical composition analysis and mechanical property tests on the raw materials to verify their compliance with the standards.
- Verify the Dimensions: Measure the key dimensions of the raw materials, such as the diameter, thickness, and length, to ensure they are within the allowable tolerance range. Use measuring tools like calipers, micrometers, and laser trackers for accurate measurement.
In - process Inspection
- Inspect the Machining Process: During the machining of the slewing bearing, check the accuracy of each process, including turning, milling, drilling, and grinding. Ensure that the surface roughness, dimensional accuracy, and geometric tolerance of the parts meet the design requirements. Regularly measure the dimensions of the work - in - process and compare them with the process drawings to detect any deviations in a timely manner.
- Check the Heat Treatment: Monitor the heat treatment process to ensure that the slewing bearing components obtain the required mechanical properties. Check the temperature, time, and cooling rate during heat treatment to ensure they are in accordance with the process regulations. Perform hardness tests and microstructure analysis on the heat - treated parts to verify the effectiveness of the heat treatment.
- Inspect the Welding Quality: For slewing bearings with welded structures, check the welding process parameters, such as welding current, voltage, and welding speed. Inspect the weld appearance for any defects like cracks, pores, and incomplete penetration. Use non - destructive testing methods such as ultrasonic testing, radiographic testing, and magnetic particle testing to detect internal welding defects.
Final Inspection
- Visual Inspection: Examine the surface of the slewing bearing for any scratches, burrs, or paint defects. Check the overall appearance of the bearing to ensure that it meets the aesthetic requirements. Inspect the assembly quality, including the installation of seals, lubrication systems, and retaining rings, to ensure they are properly installed.
- Dimensional Inspection: Measure all the key dimensions of the slewing bearing, including the outer diameter, inner diameter, width, and gear dimensions. Ensure that the dimensions are within the specified tolerance range. Use precision measuring instruments to perform comprehensive dimensional verification.
- Functional Testing: Conduct rotational tests to check the smoothness of the slewing bearing's rotation and measure the friction torque. Test the load - carrying capacity of the bearing according to the specified requirements to ensure that it can withstand the designed load. Check the sealing performance of the bearing to prevent oil leakage and dust ingress.
- Packaging Inspection: Inspect the packaging of the slewing bearing to ensure that it is suitable for transportation and storage. Check if the packaging materials, such as wooden cases and protective films, can effectively protect the bearing from damage. Verify that the packaging is labeled with the correct product information, including the model, specification, and batch number.
LYHY Slewing Bearing Packing
Bearing surface is covered with the anti-rust oil first; and then wrapped with the plastic film;
And then packed with kraft paper and professional belts;
At last, with wooden box totally at the outer packing to invoid the rust or the moist;
We can depend on the customers demand to be packed;
Bearing surface is covered with the anti-rust oil first; and then wrapped with the plastic film;
And then packed with kraft paper and professional belts;
At last, with wooden box totally at the outer packing to invoid the rust or the moist;
We can depend on the customers demand to be packed;
Transportation:
All LYHY slewing ring bearings can be usually delivered timely, usual production time is 15-50 days based on different slew bearings diameters, sometimes slew rings will be in stock.
Slewing bearings can be offered different delivery terms, such as EXW, FOB, CIF, DDU and so on.
Also, slewing rings can be transported by different transport ways, by express (such as DHL, TNT, UPS, FEDEX and so on), by air, by sea, by truck, by railway and so on.
All LYHY slewing ring bearings can be usually delivered timely, usual production time is 15-50 days based on different slew bearings diameters, sometimes slew rings will be in stock.
Slewing bearings can be offered different delivery terms, such as EXW, FOB, CIF, DDU and so on.
Also, slewing rings can be transported by different transport ways, by express (such as DHL, TNT, UPS, FEDEX and so on), by air, by sea, by truck, by railway and so on.
Slewing Ring Bearings------Applications:
Slewing ring bearings are widely used in industry and known as "the machine joints" Here under is the specific slewing bearing applications
1. Construction machinery (e.g. cranes, excavators, loader, scraper)
2. Metallurgical machinery (e.g. for steel plant)
3. Heavy machinery equipment (e.g. mining machinery, concrete machinery)
4. Marine machinery equipment (e.g. vessel, port hoisting machine, port oil transfer equipment, onshore and offshore crane)
5. Light machinery equipment (e.g. paper machine, plastic, rubber machine, weave machine)
6. Wind power generator
8. Packing machinery
Slewing ring bearings are widely used in industry and known as "the machine joints" Here under is the specific slewing bearing applications
1. Construction machinery (e.g. cranes, excavators, loader, scraper)
2. Metallurgical machinery (e.g. for steel plant)
3. Heavy machinery equipment (e.g. mining machinery, concrete machinery)
4. Marine machinery equipment (e.g. vessel, port hoisting machine, port oil transfer equipment, onshore and offshore crane)
5. Light machinery equipment (e.g. paper machine, plastic, rubber machine, weave machine)
6. Wind power generator
8. Packing machinery
INSTALLATION OF LYHY SLEWING BEARINGS
Preparation:
Make sure that the model is correct and slewing bearing isn't damaged during transportation.
2. Check the appearance and rotational state of the bearing, such as rotational precision clearance, rotating flexibility, seals position, lubrication grease etc.
3. The installation datum plane and bracket installing plane should be clean, grease, burr, paint and other foreign body should be wiped off.
Installation:
1. The screws in the installing plane should be fit with the mounting holes in the slewing bearing
2. The slewing bearing has a soft zone marked with an "s" on the upper surface, when installing the bearing, it is important to ensure that this area is placed in a non-load or infrequent load zone.
3. When the bearing is placed on the supporting frame work it is important to check the interface between these two surfaces. This check should be carried out with the insertion of feel gauges between the two surfaces. If a gap should exist then it is recommended to plane/resurface the effective area so as to remove the gap.
4. Install slewing bearing with high strength screws, and choose appropriate strength bolts. All bolts are required to be tightened evenly. The sequence of this tightening process is shown in Pic. Welding of bearing is not allowed, in the event of welding any adjacent parts, heat transfer shall be avoided so as to cause the bearing to become deformed or change the hardness.
5. After installation, the bearing should be rotated to check for smooth operation and any emission of unusual noise. If either of the aforementioned are noted, then the bearing should be adjusted to eliminate them. The teeth of the largest run-out are coated with green paint.
Preparation:
Make sure that the model is correct and slewing bearing isn't damaged during transportation.
2. Check the appearance and rotational state of the bearing, such as rotational precision clearance, rotating flexibility, seals position, lubrication grease etc.
3. The installation datum plane and bracket installing plane should be clean, grease, burr, paint and other foreign body should be wiped off.
Installation:
1. The screws in the installing plane should be fit with the mounting holes in the slewing bearing
2. The slewing bearing has a soft zone marked with an "s" on the upper surface, when installing the bearing, it is important to ensure that this area is placed in a non-load or infrequent load zone.
3. When the bearing is placed on the supporting frame work it is important to check the interface between these two surfaces. This check should be carried out with the insertion of feel gauges between the two surfaces. If a gap should exist then it is recommended to plane/resurface the effective area so as to remove the gap.
4. Install slewing bearing with high strength screws, and choose appropriate strength bolts. All bolts are required to be tightened evenly. The sequence of this tightening process is shown in Pic. Welding of bearing is not allowed, in the event of welding any adjacent parts, heat transfer shall be avoided so as to cause the bearing to become deformed or change the hardness.
5. After installation, the bearing should be rotated to check for smooth operation and any emission of unusual noise. If either of the aforementioned are noted, then the bearing should be adjusted to eliminate them. The teeth of the largest run-out are coated with green paint.
FAQ:
Q: Are LYHY BEARINGS trading company or manufacturer?
A: LYHY BEARINGS is a professional manufacturer for slewing bearings, thin section bearings, ball bearings and rolling bearings
Q: How do LYHY BEARINGS control quality of their bearing?
A: LYHY BEARINGS has established strict quality control systems, all the products and services has passed ISO9001-2008 Quality Certificate and third party such as CCS, LR,ABS,BV
Q: What is the MOQ?
A: MOQ is 1pc, pls message us for detailed information.
Q: How about the package for LYHY bearings?
A: Standard Industrial packing in general condition (Plastic tube+ professional plastic belts+ plywood case). Accept design package when OEM.
Q: How long is the production time?
A: It takes about 7-40 days, depends on the model and quantity.
Q: How about the shipping?
A: We can arrange the shipment or you may have your own forwarder.
Q: Is sample available?
A: Yes, sample order is acceptable.
Q: Can we use our own LOGO or design on bearings?
A: Yes. OEM is acceptable for LYHY BEARINGS. We can design as per your requirements and use your own LOGO and package design.
