IP Unknown
MadeInChina.com > Lights & Lighting > Lighting Fixtures > Dimmer
 
 

32 Steps OLED PIR Sensor Stair Light Controller with Daylight Sensor for Stair Light Smart Controller

Price $35.00 Compare
Min Order 10 Pieces
Shipping From Guangdong, China
Popularity 427 people viewed
Quantity
+-
 

Shenzhen Kediya Technology Co., Ltd.

VIP   Audited Supplier 4 years
Profile Certified by SGS/BV
Visit Homepage Product Catalog
SL1001
Without Remote Control
Indirect
Sectional
Active
Exhibition Hall, Hotel, Stage, Home Lighting
DC
Pressure Regulating Dimmer
3-Year
Stair Light Controller
32 X (5-24)W
Manual Switch
Lighting and Circuitry Design
Stair Light Controller
kdyled
Express Delivery
China
9405499000
Product Description

 

PIR Sensor Stair Light Controller
 
PIR sensor/ Daylight Sensor/ Max 32 steps /Compatible with 28 kinds of chips /Max 960 pixels /OLED display/Match with IR re
Features
Multifunctional PIR sensor stair light controller features daylight sensor.
32 channels constant voltage output drive low voltage LED strip, Max. 1A current per channel.
2 groups same SPI(TTL) signal output, drive 28 kinds IC digital RGB LED strip,IC type and R/G/B order can be set. Compatible ICs: TM1804, TM1809, TM1812, UCS1903, UCS1909, UCS1912, UCS2903, UCS2909, UCS2912,
WS2811, WS2812, TM1829, TM1914A, GW6205, GS8206,GS8208,LPD6803, LPD1101, D705, UCS6909, UCS6912, LPD8803, LPD8806, WS2801,WS2803, P9813, SK9822, SM16703P.
Easy operation with OLED display and 3 buttons.
four work light modes selectable.
Two stair light controllers can cascade.
Built-in multiple color mode, speed and brightness 1-8 grade adjustable.
Push switch can be used as induction signal input.
With fast self-testing function.
Any damaged LED channel in 32 channels can be set disable. Can match with IR reflection induction probe(Standard)or when need accurate sensing area, can match with IR reflection induction set ES-T.
Technical Parameters
Note: 1.The LED pixel strip also use separate power supply.
2.The PIR sensor can replace with IR reflection induction probe(ES-T) or other sensor with 5V level output.

OLED screen and key operations

 
1. Long press M key for 2s, enter system parameters setting state, to switch four work light modes, set light off mode,
push switch input function, chip type and RGB order or daylight sensor threshold.
2. Short press M key, enter current work light mode parameters setting state.
3. When in parameters setting state, short press M key to switch multiple parameters, press < or > key for parameters'
adjustment.
4. Long press M key or wait 15s to quit parameter setting state.
5. Long press M & > key for 2s, display ''Light up test''on the 4 line of OLED screen, start up direction induction light
testing.
6. Long press M & < key for 2s, display ''Light down test'' on the 4 line of OLED screen, start down direction induction light
testing.
7. Long press < & > key for 2s, restore factory default parameters, jump to language interface automatically, press < or > to
switch two languages(Chinese and English), press M key to exit language interface.
8. Long press & M for 2s, enter 32 channels LED disable setting interface.
9. When work in White Step/Color Flow/Color Step/White Step + Color Flow mode, the 4 line display color mode
name. When the controller is in induction state, the indication of inductive signal input (''Light up start'' and ''Light down
start'') is displayed first, and then the light on/off status is displayed. If the current detected LUX value is greater than
daylight sensor threshold, display ''Light up off" or "Light down off" on the fourth line.

System parameters setting

 
Out: Switch four work light modes.
White_Step: Only multiple constant voltage LED strip light mode.
Color_Flow: Only 1 or 2 straight line digital pixel LED strip light mode.
Color_Step: Only multiple Z-shape digital pixel LED strip light mode.
Step+Flow: Multiple constant voltage LED strip + 1 or 2 straight line digital pixel LED strip light mode.
 
Chip: Select one chip type from ten options (shown in below table) one of these from 6 RGB orders (RGB,RBG,GRB,GBR,
BRG,BGR). The parameters are valid only for the work modes with SPI signal output.
 
Def RGB: RGB hex value for user-define color. The parameters are valid only for the work modes with SPI signal output.
 
LuxSet: Daylight sensor threshold (10, 30, 50, 100, 150, 200lux, OFF), with sufficient ambient light, the PIR sensor does
not turn on the light.Daylight sensor default off. The digital value after * is current detected LUX value.
 
OFF: Set 2 types of lights off and delay time at the end of sensing. Delay sync: Lights are synchronized off with a delay
time.One by one: Lights turn off sequentially from the end to the head with a delay time.Delay time: 5s, 10s, 15s, 20s,
30s, 1min, 3min, 5min, 10min, cancel. Set cancellation means not turn off the light.
 
Push: Switch two kinds of push switch input modes.
Cascade: The push switch input work as cascade input/output or simulated PIR inductive input.
All-on: The push operation will turn on all light and turn off synchronously after the delay time.
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA  
MadeInChina.com 86-025-66775089 Monday to Friday 09:00-18:00 Email: service@madeinchina.com
Source on MadeInChina
Request for Quotation
Search Products
Find Suppliers
Join Free
Customer Services
Terms of Use
Privacy Policy
Payment and Security
Submit a Complaint
About us
About MadeInChina
Contact Us
Online Inquiry
FAQ

Scan on mobile