T6C high pressure Parker Denison single vane oil pump
High pressure and high performance dowel pin type vane pumps are widely used for plastic machinery,casting machinery,metallurgy machinery,pressing machinery,refining machinery,construction machinery,marine-Machinery.
Features:
1.With dowel pin vane structure,it can work in high pressure,low noise and long lifetime.
2.This vane pump can fit wide viscosity hydraulic medium,and be started at low temperature and work at high temperature.
3.As the vane pump adopts bilabial structure vane,it has high oil polution resistance and wide speed scope.



Model Designation
T7B | S | B10 | -1 | R | 00 | -A | 1 | 01 | |||||||||||||||||||||||||||||||||||||||
Series | Type Code | Flow code | Shaft typ | Rotation | Outiet position | Design numbe | Sealing L eve | Port dimensions | |||||||||||||||||||||||||||||||||||||||
T7B | No ISO 3019 nstallatior Flange S:SAE J744 installation flange | B02,B03,B4,B05 B06,B07,B08,B10 B12,B15 | See of shaft | () Viewed from shaft end of pump) R- right hand for clockwise L- eft hand for counter- clockwise | () (Viewed from shaft end of pump) 00- Opposite inlet por 01- Inline with inle 02-90° 90°CCW from inlet 03-90° 90°CW from inlet | A | 1-S1 NBR Nitrile rubber 5-S5 Fluororubbe | 00,01, See installatio dimensions | |||||||||||||||||||||||||||||||||||||||
T7D | B14,B17,B20,B22,B24 B28,B31,B35,B38,B42 | ||||||||||||||||||||||||||||||||||||||||||||||
T7E | 042,045,050,052,054, 057,062,066,072,085 | ||||||||||||||||||||||||||||||||||||||||||||||
T6C | : M: P: NO: iodustrial type M:truck type P·truck type double seal kits | 003/B03.005/B05.006/B06 008/B08,010/B10,012/B12, 014/B14,017/B17,020/B20 022/B22,025/B25,028/B28, 031/B31 | |||||||||||||||||||||||||||||||||||||||||||||
T6D | 014/B14.017/B17.020/B20 024/B24,028/B28,031/B31 035/B35,038/B38,042/B42, 045/B45,050/B50,061 | ||||||||||||||||||||||||||||||||||||||||||||||
T6E | 042,045,050,052,057 062,066,072,085 | ||||||||||||||||||||||||||||||||||||||||||||||
Technical Data
series | Flow code (Usgpm) | Geometric displace- ment mL/r | /Max.pressure Mpa | /Max.speed r/min | Min. speed r/min | ||||||||||||||||||||||||||||||||||||||||||
Antiwear hydraulic oil | General hydraulic oil or phosphate ester fluid | Water glycol fluid or water-oil emulsions | General hydraulic oil or antiwear hydraulic oil | , Water glycol fluid or phosphate ester fluid or water-oil emulsions | |||||||||||||||||||||||||||||||||||||||||||
nstant | Continuous | nstan | Continuous | Instant | Continuous | ||||||||||||||||||||||||||||||||||||||||||
T6C | 003/B03 | 10.8 | 28 | 24 | 21 | 17.5 | 17.5 | 14 | 2800 | 1800 | 600 | ||||||||||||||||||||||||||||||||||||
005/B05 | 17.2 | ||||||||||||||||||||||||||||||||||||||||||||||
006/B06 | 21.3 | ||||||||||||||||||||||||||||||||||||||||||||||
008/B08 | 26.4 | ||||||||||||||||||||||||||||||||||||||||||||||
010/B10 | 34.1 | ||||||||||||||||||||||||||||||||||||||||||||||
012/B12 | 37.1 | ||||||||||||||||||||||||||||||||||||||||||||||
014/B14 | 46.0 | ||||||||||||||||||||||||||||||||||||||||||||||
017/B17 | 58.3 | ||||||||||||||||||||||||||||||||||||||||||||||
020/B20 | 63.8 | ||||||||||||||||||||||||||||||||||||||||||||||
022/B22 | 70.3 | ||||||||||||||||||||||||||||||||||||||||||||||
025/B25 | 79.3 | 2500 | |||||||||||||||||||||||||||||||||||||||||||||
028/B28 | 88.8 | 21 | 16 | 21 | 16 | 17.5 | 14 | 2500 | 1800 | 600 | |||||||||||||||||||||||||||||||||||||
031/B31 | 100.0 | ||||||||||||||||||||||||||||||||||||||||||||||
T6D T6E | 014/B14 | 47.6 | 25 | 21 | 21 | 17.5 | 17.5 | 14 | 2500 | 1800 | 600 | ||||||||||||||||||||||||||||||||||||
017/B17 | 58.2 | ||||||||||||||||||||||||||||||||||||||||||||||
020/B20 | 66.0 | ||||||||||||||||||||||||||||||||||||||||||||||
024/B24 | 79.5 | ||||||||||||||||||||||||||||||||||||||||||||||
028/B28 | 89.7 | ||||||||||||||||||||||||||||||||||||||||||||||
031/831 | 98.3 | ||||||||||||||||||||||||||||||||||||||||||||||
035/B35 | 111.0 | ||||||||||||||||||||||||||||||||||||||||||||||
038/B38 | 120.3 | ||||||||||||||||||||||||||||||||||||||||||||||
042/B42 | 136.0 | 2200 | |||||||||||||||||||||||||||||||||||||||||||||
045/B45 | 145.7 | 2200 | |||||||||||||||||||||||||||||||||||||||||||||
050/B50 | 158.0 | 21 | 16 | 21 | 16 | 17.5 | 14 | 2200 | 1800 | 600 | |||||||||||||||||||||||||||||||||||||
061 | 190.5 | 12 | 8 | 8 | 8 | 7.5 | 7.5 | ||||||||||||||||||||||||||||||||||||||||
042 | 132.3 | 25 | 21 | 21 | 17.5 | 17.5 | 14 | 2200 | 1800 | 600 | |||||||||||||||||||||||||||||||||||||
045 | 142.4 | ||||||||||||||||||||||||||||||||||||||||||||||
050 | 158.5 | ||||||||||||||||||||||||||||||||||||||||||||||
052 | 164.8 | ||||||||||||||||||||||||||||||||||||||||||||||
057 | 179.8 | ||||||||||||||||||||||||||||||||||||||||||||||
062 | 196.7 | ||||||||||||||||||||||||||||||||||||||||||||||
066 | 213.3 | ||||||||||||||||||||||||||||||||||||||||||||||
072 | 227.1 | ||||||||||||||||||||||||||||||||||||||||||||||
085 | 269.0 | 12 | 8 | 12 | 8 | 7.5 | 7.5 | 2000 | 1800 | 600 |
series | Geological Displacemen mL/rev | Rotation speed r/min | /Flow(L/min) | /Input Power (KW) | |||||||||||||||||||||||||||||||||||||||||||
P=0 MPa | P=7 MP | P=14 MPa | P=2 MPa | P=24 MP | P=28 MPa | P=32 MPa | P=0.7 MPa | P= MPa | P=14 MPa | P=2 MPa | P=2 MPa | P=28 MPa | P=32 MPa | ||||||||||||||||||||||||||||||||||
L/mir | L/mir | L/min | L/min | L/min | L/min | Umin | KW | Kw | KW | Kw | Kw | Kw | KW | ||||||||||||||||||||||||||||||||||
T7B(S)-B02 | 5.8 | 1000 | 5.8 | 4.9 | 4.2 | 3.3 | 0.2 | 0.9 | 1.7 | 2.5 | |||||||||||||||||||||||||||||||||||||
1200 | 7.0 | 6.1 | 5.4 | 4.5 | 4.0 | 0.4 | 1.3 | 2.2 | 3.2 | 3.6 | |||||||||||||||||||||||||||||||||||||
1500 | 8.7 | 7.8 | 7.1 | 6.2 | 5.7 | 5.2 | 4.7 | 0.6 | 1.7 | 2.8 | 4.0 | 4.5 | 5.2 | 5.9 | |||||||||||||||||||||||||||||||||
1800 | 10.4 | 9.5 | 8.8 | 7.9 | 7.4 | 6.9 | 6.4 | 0.7 | 2.0 | 3.4 | 5.0 | 5.6 | 6.4 | 7.2 | |||||||||||||||||||||||||||||||||
T7B(S)-B03 | 9.8 | 1000 | 9.8 | 8.9 | 8.2 | 7.3 | 6.8 | 6.3 | 5.8 | 0.2 | 1.3 | 2.6 | 3.9 | 4.5 | 5.2 | 6.0 | |||||||||||||||||||||||||||||||
1200 | 11.8 | 10.9 | 10.2 | 9.3 | 8.8 | 8.3 | 7.8 | 0.4 | 1.8 | 3.3 | 4.9 | 5.5 | 6.4 | 7.3 | |||||||||||||||||||||||||||||||||
1500 | 14.7 | 13.8 | 13.1 | 12.2 | 11.7 | 1.2 | 10.7 | 0.7 | 2.4 | 4.2 | 6.1 | 6.9 | 8.0 | 9.1 | |||||||||||||||||||||||||||||||||
180 | 17.6 | 16.7 | 16.0 | 15.1 | 14.6 | 14.1 | 13.6 | 0.8 | 2.8 | 5.1 | 7.5 | 8.5 | 9.7 | 11.0 | |||||||||||||||||||||||||||||||||
T7B(S)-B04 | 12.8 | 1000 | 12.8 | 1.0 | 1.2 | 10.3 | 9.8 | 9.3 | 8.8 | 0.2 | 1.7 | 3.3 | 5.0 | 5.7 | 8.6 | 7.6 | |||||||||||||||||||||||||||||||
1200 | 15.4 | 14.5 | 13.8 | 12.9 | 2.4 | 1.9 | 11.4 | 0.5 | 2.2 | 4.2 | 6.1 | 6.9 | 8.1 | 9.2 | |||||||||||||||||||||||||||||||||
1500 | 19.2 | 18.3 | 17.6 | 16.7 | 6.2 | 5.7 | 15.2 | 0.7 | 2.9 | 5.3 | 7.7 | 8.7 | 10.1 | 11.5 | |||||||||||||||||||||||||||||||||
1800 | 23.0 | 22.1 | 21.4 | 20.5 | 20.0 | 19.5 | 19.0 | 0.9 | 3.4 | 6.4 | 9.4 | 10.6 | 12.3 | 13.9 | |||||||||||||||||||||||||||||||||
T7B(S)-B05 | 15.9 | 1000 | 15.9 | 15.0 | 14.3 | 13.4 | 2.9 | 2.4 | 11.9 | 0.3 | 2.1 | 4.1 | 6.0 | 6.9 | 8.1 | 9.2 | |||||||||||||||||||||||||||||||
1200 | 19.1 | 18.2 | 17.5 | 16.6 | 6.1 | 5.6 | 15.1 | 0.5 | 2.7 | 5.0 | 7.4 | 8.4 | 9.8 | 11.2 | |||||||||||||||||||||||||||||||||
1500 | 23.9 | 23.0 | 22.3 | 21.4 | 20.9 | 20.4 | 19.9 | 0.8 | 3.4 | 6.4 | 9.3 | 10.6 | 12.3 | 14.0 | |||||||||||||||||||||||||||||||||
1800 | 28.6 | 27.7 | 27.0 | 26.1 | 25.6 | 25.1 | 24.6 | 0.9 | 4.1 | 7.7 | 11.3 | 12.8 | 14.9 | 16.9 | |||||||||||||||||||||||||||||||||
T7B(S)-B06 | 19.8 | 1000 | 19.8 | 18.9 | 18.2 | 17.3 | 6.8 | 16.3 | 15.8 | 0.3 | 2.5 | 5.0 | 7.4 | 8.5 | 9.9 | 11.3 | |||||||||||||||||||||||||||||||
1200 | 23.8 | 22.9 | 22.2 | 21.3 | 20.8 | 20.3 | 19.8 | 0.6 | 3.2 | 6.1 | 9.1 | 0.3 | 2.0 | 13.7 | |||||||||||||||||||||||||||||||||
1500 | 29.7 | 28.8 | 28.1 | 27.2 | 26.7 | 26.2 | 25.7 | 0.8 | 4.1 | 7.7 | 11.4 | 12.9 | 5.0 | 17.1 | |||||||||||||||||||||||||||||||||
1800 | 35.6 | 34.7 | 34.0 | 33.1 | 32.6 | 32.1 | 31.6 | 1.0 | 4.9 | 9.3 | 3.8 | 5.7 | 18.1 | 20.6 | |||||||||||||||||||||||||||||||||
T7B(S)-B07 | 22.5 | 1000 | 22.5 | 21.6 | 20.9 | 20.0 | 9.5 | 19.0 | 18.5 | 0.4 | 2.8 | 5.6 | 8.3 | 9.6 | 11.2 | 12.8 | |||||||||||||||||||||||||||||||
1200 | 27.0 | 26.1 | 25.4 | 24.5 | 24.0 | 23.5 | 23.0 | 0.6 | 3.6 | 6.9 | 0.2 | 1.6 | 3.5 | 15.4 | |||||||||||||||||||||||||||||||||
1500 | 33.8 | 32.9 | 32.2 | 31.3 | 30.8 | 30.3 | 29.8 | 0.9 | 4.6 | 8.7 | 12.8 | 4.6 | 6.9 | 19.3 | |||||||||||||||||||||||||||||||||
1800 | 40.5 | 39.6 | 38.9 | 38.0 | 37.5 | 37.0 | 36.5 | 1.1 | 5.5 | 10.5 | 15.5 | 17.6 | 20.4 | 23.2 | |||||||||||||||||||||||||||||||||
T7B(S)-B08 | 24.9 | 1000 | 24.9 | 24.0 | 23.3 | 22.4 | 21.9 | 21.4 | 20.9 | 0.4 | 3.1 | 6.2 | 9.2 | 10.5 | 12.3 | 14.0 | |||||||||||||||||||||||||||||||
1200 | 29.9 | 29.0 | 28.3 | 27.4 | 26.9 | 26.4 | 25.9 | 0.6 | 3.9 | 7.6 | 1.2 | 12.8 | 4.8 | 16.9 | |||||||||||||||||||||||||||||||||
1500 | 37.4 | 36.5 | 35.8 | 34.9 | 34.4 | 33.9 | 33.4 | 0.9 | 5.0 | 9.5 | 14.1 | 6.0 | 8.6 | 21.2 | |||||||||||||||||||||||||||||||||
1800 | 44.8 | 43.9 | 43.2 | 42.3 | 41.8 | 41.3 | 40.8 | 1.1 | 6.0 | 11.5 | 17.0 | 19.3 | 22.4 | 25.5 | |||||||||||||||||||||||||||||||||
T7B(S)-B10 | 31.8 | 1000 | 31.8 | 30.9 | 30.2 | 29.3 | 28.8 | 28.3 | 27.8 | 0.5 | 3.9 | 7.8 | 1.6 | 13.3 | 15.5 | 17.7 | |||||||||||||||||||||||||||||||
1200 | 38.2 | 37.3 | 36.6 | 35.7 | 35.2 | 34.7 | 34.2 | 0.7 | 4.9 | 9.5 | 14.1 | 16.1 | 18.7 | 21.4 | |||||||||||||||||||||||||||||||||
1500 | 47.7 | 46.8 | 46.1 | 45.2 | 44.7 | 44.2 | 43.7 | 1.1 | 6.2 | 1.9 | 7.7 | 20.1 | 23.4 | 26.7 | |||||||||||||||||||||||||||||||||
1800 | 57.2 | 56.3 | 55.6 | 54.7 | 54.2 | 53.7 | 53.2 | 1.3 | 7.4 | 14.4 | 21.3 | 24.3 | 28.2 | 32.1 | |||||||||||||||||||||||||||||||||
T7B(S)-B12 | 41.0 | 1000 | 41.0 | 40. | 39.4 | 38.5 | 38.0 | 37.5 | 0.6 | 5.0 | 9.9 | 4.8 | 7.0 | 19.8 | |||||||||||||||||||||||||||||||||
1200 | 49.2 | 48.3 | 47.6 | 46.7 | 46.2 | 45.7 | 0.9 | 6.2 | 12.1 | 18.0 | 20.5 | 23.9 | |||||||||||||||||||||||||||||||||||
1500 | 61.5 | 60.6 | 59.9 | 59.C | 58.5 | 58.0 | 1.2 | 7.8 | 5 | 22.5 | 25. | 29.9 | |||||||||||||||||||||||||||||||||||
1800 | 73.8 | 72.9 | 72.2 | 71.3 | 70.8 | 70.3 | 1.5 | 9.4 | 18 | 27. | 30.9 | 35.9 | |||||||||||||||||||||||||||||||||||
T7B(S)-B15 | 50.0 | 1000 | 50.0 | 49.1 | 48.4 | 47.5 | 47.0 | 46.5 | 0.7 | 6.0 | 12.0 | 8.0 | 20.6 | 24.0 | |||||||||||||||||||||||||||||||||
1200 | 60.0 | 59.1 | 58.4 | 57.5 | 57 | 56.5 | 1.0 | 7.4 | 14.6 | 21.7 | 24.8 | 28.9 | |||||||||||||||||||||||||||||||||||
1500 | 75.0 | 74.1 | 73.4 | 72.5 | 72.0 | 71.5 | 1.4 | 9.4 | 18.3 | 27.2 | 31.1 | 36.2 | |||||||||||||||||||||||||||||||||||
1800 | 90.0 | 89.1 | 88.4 | 87.5 | 87.0 | 86.5 | 1.7 | 11.3 | 22.0 | 32.8 | 37.4 | 43.5 | |||||||||||||||||||||||||||||||||||
series | Geological Displaceme-nt mL/rev | Rotatio speed r/min | /Flow(L/min) | ||||||||||||||||||||
P M | P=14 MPa | P=2 MPa | |||||||||||||||||||||
L/min | L/min | L/min | |||||||||||||||||||||
T7D(S)-B14 | 44.0 | 1000 | 44.0 | 37.4 | 29.9 | ||||||||||||||||||
1200 | 52.8 | 46.2 | 38.7 | ||||||||||||||||||||
1500 | 66.0 | 59.4 | 51.9 | ||||||||||||||||||||
1800 | 79.2 | 72.6 | 65. | ||||||||||||||||||||
T7D(S)-B17 | 55.0 | 1000 | 55.0 | 48.4 | 40.9 | ||||||||||||||||||
1200 | 66.0 | 59.4 | 51.9 | ||||||||||||||||||||
1500 | 82.5 | 75.9 | 68.4 | ||||||||||||||||||||
1800 | 99.0 | 92.4 | 84.9 | ||||||||||||||||||||
T7D(S)-B20 | 66.0 | 1000 | 66.0 | 59.4 | 51.9 | ||||||||||||||||||
1200 | 79.2 | 72.6 | 65. | ||||||||||||||||||||
1500 | 99.0 | 92.4 | 84.9 | ||||||||||||||||||||
1800 | 118.8 | 112.2 | 104.7 | ||||||||||||||||||||
T7D(S)-B22 | 70.3 | 1000 | 70.3 | 63.7 | 56.2 | ||||||||||||||||||
1200 | 84.4 | 77.8 | 70.3 | ||||||||||||||||||||
1500 | 105.5 | 98.8 | 91.4 | ||||||||||||||||||||
1800 | 126.5 | 119.9 | 112.4 | ||||||||||||||||||||
T7D(S)-B24 | 81.1 | 1000 | 81.1 | 74.5 | 67 | ||||||||||||||||||
1200 | 97.3 | 90.7 | 83.2 | ||||||||||||||||||||
1500 | 121.7 | 115.1 | 107.6 | ||||||||||||||||||||
1800 | 146.0 | 139.4 | 131.9 | ||||||||||||||||||||
T7D(S)-B28 | 90.0 | 1000 | 90.0 | 83.4 | 75.9 | ||||||||||||||||||
1200 | 108.0 | 101.4 | 93.9 | ||||||||||||||||||||
1500 | 135.0 | 128.4 | 120.9 | ||||||||||||||||||||
800 | 162.0 | 55.4 | 147.9 | ||||||||||||||||||||
T7D(S)-B3 | 99.2 | 1000 | 99.2 | 92.6 | 85. | ||||||||||||||||||
1200 | 119.8 | 113.2 | 105.7 | ||||||||||||||||||||
1500 | 148.8 | 142.2 | 134.7 | ||||||||||||||||||||
1800 | 178.6 | 172.0 | 164.5 | ||||||||||||||||||||
T7D(S)-B35 | 113.4 | 1000 | 113.4 | 106.8 | |||||||||||||||||||
1200 | 136.1 | 129.5 | |||||||||||||||||||||
1500 | 170.1 | 163.5 | |||||||||||||||||||||
1800 | 204.1 | 197.5 | |||||||||||||||||||||
T7D(S)-B38 | 120.6 | 1000 | 120.6 | 114.C | |||||||||||||||||||
1200 | 144.7 | 138.1 | |||||||||||||||||||||
1500 | 180.9 | 174.3 | |||||||||||||||||||||
1800 | 217.1 | 210.5 | |||||||||||||||||||||
T7D(S)-B42 | 137.5 | 1000 | 137.5 | 130.9 | |||||||||||||||||||
1200 | 165.0 | 158.4 | |||||||||||||||||||||
500 | 206.3 | 199.7 | |||||||||||||||||||||
1800 | 247.5 | 240.9 | |||||||||||||||||||||
series | Geologica Displaceme-nt mL/rev | Rotation speed r/min | /Flow(L/min) | /Input Power (KW) | |||||||||||||||||||||||||||||||||||||||||||
RPa | P=7 MMP | MPa | P=2 MP | P= 24 MPa | P=28 MPa | PB | MPa | MPa | |||||||||||||||||||||||||||||||||||||||
L/min | /min | L/mi | Umin | L/min | L/min | kw | Kw | kw | kw | kw | kw | ||||||||||||||||||||||||||||||||||||
T6C-003 T6C-B03 | 10.8 | 1000 | 10.8 | 8.3 | 5.8 | 0.9 | 2.2 | 3.7 | |||||||||||||||||||||||||||||||||||||||
1200 | 13.0 | 10.5 | 8.0 | 1.1 | 2.6 | 4.4 | |||||||||||||||||||||||||||||||||||||||||
1500 | 16.2 | 13.7 | 11.2 | 8.7 | 8.2 | 1.3 | 3.3 | 5.4 | 7.6 | 8.5 | |||||||||||||||||||||||||||||||||||||
1800 | 19.4 | 16.9 | 14.4 | 11.9 | 11.4 | 10.3 | 1.7 | 4.0 | 6.4 | 8.9 | 10.0 | 11.5 | |||||||||||||||||||||||||||||||||||
T6C-005 T6C-B0E | 17.2 | 1000 | 17.2 | 14.7 | 12.2 | 9.7 | 9.2 | 1.0 | 3.0 | 5.2 | 7.4 | 8.4 | |||||||||||||||||||||||||||||||||||
1200 | 20.6 | 18.1 | 15.6 | 13.1 | 12.6 | 11.5 | 1.1 | 3.5 | 6.2 | 8.8 | 10.0 | 11.5 | |||||||||||||||||||||||||||||||||||
1500 | 25.8 | 23.3 | 20.8 | 18.3 | 17.8 | 16.7 | 1.4 | 4.4 | 7.7 | 10.9 | 12.3 | 14.1 | |||||||||||||||||||||||||||||||||||
1800 | 31.0 | 28.5 | 26.0 | 23.5 | 23.0 | 21.9 | 1.9 | 5.3 | 9.1 | 13.0 | 14.6 | 16.8 | |||||||||||||||||||||||||||||||||||
T8c B08 | 21.3 | 1000 | 21.3 | 18.8 | 16.3 | 13.8 | 13.3 | 12.2 | 1.0 | 3.4 | 6.1 | 8.9 | 10.0 | 11.5 | |||||||||||||||||||||||||||||||||
1200 | 25.6 | 23.1 | 20.6 | 8.1 | 17.6 | 16.5 | 1.2 | 4.1 | 7.3 | 10.5 | 11.9 | 13.8 | |||||||||||||||||||||||||||||||||||
1500 | 32.0 | 29.5 | 27.0 | 24.5 | 24.0 | 22.9 | 1.5 | 5.1 | 9.1 | 13.1 | 14.8 | 17.0 | |||||||||||||||||||||||||||||||||||
1800 | 38.3 | 35.8 | 33.3 | 30.8 | 30.3 | 29.2 | 1.9 | 6.2 | 10.8 | 15.6 | 17.6 | 20.3 | |||||||||||||||||||||||||||||||||||
T6C-008 T6C-B0E | 26.4 | 1000 | 26.4 | 23.9 | 21.4 | 18.9 | 18.4 | 17.3 | 1.1 | 4.0 | 7.3 | 10.6 | 12.0 | 13.9 | |||||||||||||||||||||||||||||||||
1200 | 31.7 | 29.2 | 26.7 | 24.2 | 23.7 | 22.6 | 1.3 | 4.8 | 8.7 | 12.7 | 14.4 | 16.6 | |||||||||||||||||||||||||||||||||||
1500 | 39.6 | 37.1 | 34.6 | 2.1 | 31.6 | 30.5 | 1.6 | 6.0 | 10.9 | 15.8 | 17.8 | 20.6 | |||||||||||||||||||||||||||||||||||
1800 | 47.5 | 45.0 | 42.5 | 40.0 | 39.5 | 38.4 | 2.1 | 7.2 | 13.0 | 18.8 | 21.3 | 24.6 | |||||||||||||||||||||||||||||||||||
T8c:818 | 34.1 | 1000 | 34.1 | 31.6 | 29.1 | 26.6 | 26.1 | 25.0 | 1.2 | 4.9 | 9.1 | 13.3 | 15.1 | 17.5 | |||||||||||||||||||||||||||||||||
1200 | 40.9 | 38.4 | 35.9 | 33.4 | 32.9 | 31.8 | 1.4 | 5.9 | 10.9 | 15.9 | 18.1 | 20.9 | |||||||||||||||||||||||||||||||||||
1500 | 51.2 | 48.7 | 46.2 | 43.7 | 43.2 | 42.1 | 1.7 | 7.3 | 13.6 | 19.8 | 22.5 | 26.0 | |||||||||||||||||||||||||||||||||||
1800 | 61.4 | 58.9 | 56.4 | 53.9 | 53.4 | 52.3 | 2.2 | 3.9 | 16.2 | 23.6 | 26.8 | 31.0 | |||||||||||||||||||||||||||||||||||
T6C-012 T6C-B12 | 37.1 | 1000 | 37.1 | 34.6 | 32.1 | 29.6 | 29.1 | 28.0 | 1.2 | 5.3 | 9.8 | 14.4 | 16.3 | 18.9 | |||||||||||||||||||||||||||||||||
1200 | 44.5 | 42.0 | 39.5 | 37.0 | 36.5 | 35.4 | 1.4 | 6.3 | 11.7 | 17.2 | 19.5 | 22.6 | |||||||||||||||||||||||||||||||||||
1500 | 55.7 | 53.2 | 50.7 | 48.2 | 47.7 | 46.6 | 1.7 | 7.9 | 14.6 | 21.4 | 24.3 | 28.1 | |||||||||||||||||||||||||||||||||||
1800 | 66.8 | 64.3 | 61.8 | 59.3 | 58.8 | 57.7 | 2.3 | 9.5 | 17.5 | 25.5 | 29.0 | 33.6 | |||||||||||||||||||||||||||||||||||
T6C-014 T6C-B14 | 46.0 | 1000 | 46.0 | 43.5 | 41.0 | 38.5 | 38.0 | 36.9 | 1.3 | 6.3 | 11.9 | 17.5 | 19.9 | 23.1 | |||||||||||||||||||||||||||||||||
1200 | 55.2 | 52.7 | 50.2 | 47.7 | 47.2 | 46.1 | 1.5 | 7.6 | 14.2 | 20.9 | 23.8 | 27.6 | |||||||||||||||||||||||||||||||||||
1500 | 69.0 | 66.5 | 64.0 | 61.5 | 61.0 | 59.9 | 1.9 | 9.4 | 17.7 | 26.1 | 29.6 | 34.3 | |||||||||||||||||||||||||||||||||||
1800 | 82.8 | 80.3 | 77.8 | 75.3 | 74.8 | 73.7 | 2.5 | 11.4 | 21.2 | 31.1 | 35.4 | 41.0 |
1.The product is light (<35KG),we pack it with foam and strong box.if it is sent by sea,We will pack it together in wooden pallet to ensure it never to hurt the package.If it send by air,we will pack wooden case for each product.
2.The product is heavy,we pack each one with wooden box to protect each product well.And the same we will pack it with pallet or wooden box.
all kinds of hydraulic component and machine part The hydraulic component is include hydraulic
pumps,hydraulic valves,hydraulic motors and other component.
The machine part is include the spare parts in excavator,forklift,truck,wheel loader … …
Our products are include:V/VQ Vickers type vane pump,V10/V20/VTM42 vane pump,T6 denison
vane pump,SQP Tokimec vane pump,VP variable vane pump,50T/150T vane pump,QT sumitomo
internal gear pump,HG rexroth internal gear pump,SGP1/SGP2/KZP4 Shimadzu/KYB gear pump,
HGP gear pump,A2F/A4VIA7V/A10V Piston pump.YCY/MCY piston pump..
Yuken type valves,Rexroth type valves…BM Eaton type Orbit motor,M series Radial piston motor …
And also high quality hydraulic accessories,such as accumulator,oil cooler,hydraulic unit …
Hydraulics drive the world!We are having great passion on it to make the world more beautiful.
Hope you join us and have a win-win cooperation together.
Q1:Can you provide a sample to check quality before the big order?
A:Yes, we can .
Q2:Can I have my brand on the products?
A:We can give you OEM depend on the quantity.
Q3:How about your quality?
A:Many industry& mobile machine manufacturers is our customer in China and over the world.
We test the goods one by one before delivery to confirm the quality.
Q4: How long has your company run in Hydraulic Fields?
A:Over 10 years
Q5: Which payment terms do you accept?
A:L/C T/T D/A D/P Western Union Paypal Money Gram
Q6: What is your delivery time?
A:It depends on whether the products you buy is in stock.If in stock, ship it within 1-3days,
if not, we can discuss and we will arrange your order as soon as possible.
Q7: What's the warranty of your products?
A:12 months~18months after shippment.