IP Unknown

MadeInChina.com > Instruments & Meters > Electronic Instrument > Calibrator

TA1500 AC / DC Standard Source

Price	$420000.00 Compare
Min Order	1 set
Shipping From	Hunan, China
Popularity	200 people viewed
Quantity	+-

Tunkia Co., Ltd.

Audited Supplier 4 years

Profile Certified by SGS/BV

Hunan, China
Eugene (Mr.)
Overseas Dept. Director

Visit Homepage Product Catalog

Product Detail

Model NO.:

TA1500

After-sales Service:

Life Time

Warranty:

12 Months Excellent After-Sales Service

Power:

Electricity

Current Output:

6ka

Customized:

Non-Customized

Trademark:

TUNKIA

Transport Package:

Package for Exporting

Origin:

China

Product Description

TA1500 AC Direct Current Standard Source

Schematic diagram of a 1kA specification current source
*Reference only.

1. Summary

TA1500 is a series of AC current standard source devices, which can output high stability and high accuracy AC current large current, suitable for calibrating AC current ammeters, current transformers, Current sensors and other devices.

2. Features

Supports combined outputs from multiple module sources up to 6 kA.
Test frequency: DC, 10 Hz ~ 65 Hz (400, 1kHz optional).
Accuracy class: 0.02 or 0.05
AC and DC current outputs use the same bus and terminal block
DC current is bipolar and does not require relay commutation.
Support external control console to adjust the current output.
The software controls the slow rise and fall of the large current, and the overshoot amplitude is small.

3. Applications

☆ Calibrate the AC current ammeter

Class 0.02 specification: Suitable for calibrating large AC-DC ammeter of class 0.1 and below.
Class 0.05 specification: Suitable for calibrating large AC-DC ammeter of class 0.2 and below.

☆ Calibrate current sensor / transformer

TA1500 can be used as a primary current input to the sensor or transformer under test.
In combination with a precision ammeter or voltmeter, the sensor or transformer is calibrated using the direct measurement method.

4. Functional features

☆ Measurement output and adjustment mode

With the "fixed-point output" method, you can directly set the required output value by clicking the touch screen.
The unit switches fully automatically to the optimal range output.

☆ Harmonic output (optional).

Optional harmonic output function, current can be superimposed 2~21 harmonics @ 50 Hz.
The amplitude and phase of each harmonic can be set independently, and the output waveform and spectrogram can be displayed.

5. Specifications

5.1 AC direct current output

Range	Short-term stability (%/min)			Measurement uncertainty (k=2) *(ppmRD+ppmRG)^[1]*			Maximum load Voltage (V_pk).
Range	Class 0.01^[2]	Class 0.02	Class 0.05	Class 0.01^[2]	Class 0.02	Class 0.05	Maximum load Voltage (V_pk).
10 A	0.003	0.005	0.01	60 + 40	150 + 50	400 + 100	8
30 A	0.003	0.005	0.01	60 + 40	150 + 50	400 + 100	8
100 A	0.003	0.005	0.01	60 + 40	150 + 50	400 + 100	8
300 A	0.003	0.005	0.01	60 + 40	150 + 50	400 + 100	8
600 A	0.003	0.005	0.01	60 + 40	150 + 50	400 + 100	8
1 kA	0.003	0.005	0.01	60 + 40	150 + 50	400 + 100	8
···	···	···	···	···	···	···	···
N*1 kA	0.003	0.005	0.01	60 + 40	150 + 50	400 + 100	8
Note: [1] RD is the reading value, RG is the range value; [2] The 0.01 level only supports DC, 45 ~ 65 Hz frequency range.

Output range: range below 1 kA (excluding 1 kA): 10%~112%*RG

Range above 1 kA (including 1 kA): 10%~100%*RG (maximum expandable output to 6 kA )

Fineness adjustment: 5 ppm*RG, 7-digit decimal display
DC ripple coefficient: ≤ 0.5% @ 5 kHz or less, AC distortion: ≤ 0.5%.
Settling time: Using the slow rise output mode, the time to stabilize to the output accuracy is about 3 s
Protection function: open circuit protection, overload protection, overheating protection

5.2 Frequency and Harmonics

Sine wave frequency	Frequency range	10 Hz ~ 65 Hz(400 Hz,1 k Hz optional)
	Minimum fineness	0.0001 Hz
	Measurement uncertainty (k=2).	0.005%
Harmonic output (Optional)	Number of harmonics	2nd ~ 21st time
	Harmonic amplitude	0.0% ~ 40.0% adjustable (relative to fundamental).
	Measurement uncertainty (k=2).	0.5%

6. General Specifications

Power supply	AC (380 ± 38) V,(50±2) Hz
Maximum power consumption	16 kVA / per1 kA
Warm-up time	30 minutes
Temperature performance	Working temperature: 10°C~35°C Calibration temperature: 18°C~28°C Storage temperature: -20 °C ~ 70 °C
Humidity performance	Operating humidity: <80% @ 30°C, <70% @ 40°C Storage humidity: (20%~80%) R· H, no condensation
altitude	< 3000 m
Communication interface	RS232 interface

7. Ordering Information

Message Type
* Message Content
* Name
* Phone
* Email
* CAPTCHA