Audited Supplier
PSPT-03
on Line
12 Months
Friction Testing Machine
50n
0.5
Electronic Load
Dynamic Load
Digital
Computer Control
100-500Kg
AC220V
10n (Standard); 5n,30n, 50n (Optional)
0.5% Fs
0.05~1000 mm/Min (Adjustable)
500mm
1~999
More Than 150mm
1%
Pubtester
Veneer Case
Jinan, Shandong
Product Description
PSPT-03 Lubricity and durability of hydrophilic coatings Test Equipment for balloons and catheters
PSPT-03 Lubricity and durability of hydrophilic coatings Test Equipment for balloons and catheters is used to test the surface friction, sliding properties and reciprocating friction force of catheters such as urinary catheters, drainage tubes, tracheal intubation, balloon catheters, guide wires, etc.
Technical Features
Specialty Design
- Reciprocating friction test of the process and return, obtain the test data under different moving directions
- The number of frictions can be set to meet multiple friction tests
- Static friction, dynamic friction, static coefficient of friction, dynamic coefficient of friction can be tested one time
- Automatic clamping device, the force value can be adjusted freely, to ensure the stability of the test
- Equipped with water circulated temperature control system, realized temperature auto control and wider temperature range
- Silicone pads and surgical diaphragms that meet the standard hardness provide a test environment close to human tissues
- Small load cell capacity ensures the accuracy of the test process
- High-precision imported ball nut screw with a new transmission structure of three-guide column guide bushing makes the system run more smoothly
- 0.5% of full scale effectively ensures accuracy and repeatability of test results
- Equipped with advanced displacement control system, displacement accuracy can reach 0.1mm
- With advanced servo drive system, which can achieve infinitely variable speed and wider test speed range to meet the user's needs for different test conditions
- 11.6inch tablet with intelligent data processing functions, providing users with a comfortable and smooth operating experience
Security Configuration
- Intelligent designs of over-travel protection, overload protection, automatic position reset and power failure memory for safe test operation
- Equipped with UL certified imported emergency stop button to maximize the safety of man and machine during the test
- Timely monitoring of the system status to ensure that the equipment is always in the best operating status
- Concise and intuitive operation interface, convenient user-defined test functions, and complete data analysis and reporting functions
- Built-in test file standard library, in line with various international test methods
- Provide historical data backup management function, which can conduct diversified analysis of historical test data
- User multi-level authority management, convenient for laboratory managers to regulate equipment use
- Equipped with a standard serial communication port, which can be connected to computer software to facilitate data processing and transmission
- Unique features such as constant elongation stress, elastic modulus, yield strength, bending test, timing constant force positioning shift test, interval selection, etc.
- Pubtester also provides professional customization services to meet the individual needs of users in fixtures, software, etc.
- Free software upgrade lifetime.
Applications
Evaluation of the sliding performance of non-intravascular catheters
| Technical Features Professional Design
Safety Configuration
Professional software
Technical Specifications
Test Principle Installation of catheter clamps in the clamping slots of the clamping system. Adjust the spacing between the two sliding clamps to the specified clamp spacing and then tighten the clamping tabs, ensure that the catheter clamps maintain a good fit. The end of the test catheter is passed from bottom to top through the two catheter clamping tabs, and the upper clamp of the tester holds the head of the catheter. Insert the rest of the catheter into the drum filled with water, hang naturally and soak for the manufacturer's recommended time. Adjust the position of the two sliding clamping blocks in the slots, let the catheter in the central position. Start the tester so that the catheter passes through the silicone sheet a sufficient distance, record force versus displacement curves. Take the average force value of the wetted section of the catheter body on the curve to report the results. Standards T-CAMDI 021-2019 Single-use hydrophilic coated guidewire YY/T 1536-2017 Catheters other than intravascular catheters-Standard test model for evaluating the surface sliding performance Applications Non-vascular catheters such as urinary catheters, drainage tubes, endotracheal tubes, balloon catheters etc., intravascular catheters, guidewire Configuration Standard Configuration: Instrument, Computer, Water bath temperature control device, Automatic clamping device, Silicone Catheter pads, Specialized fixtures, Professional software and communication cable. Optional Parts: Non-standard fixture (customized) Automatic clamping force device | |||||||||||||||||||||||||||
Technical Specifications
| Specifications | PSPT-03 |
| Load Cell Capacity | 10N (standard); 5N,30N, 50N (optional) |
| Testing Accuracy | 0.5% FS |
| Testing Speed | 0.05~1000 mm/min (Adjustable) |
| Accuracy of Speed | ±1% |
| Maximum Stroke | 500mm |
| Number of Friction | 1~999 |
| Number of Specimens | 1 |
| Test Distance of Catheter | >150mm |
| Clamping Way | Manual |
| Power Supply | AC 220V 50Hz/120V 60Hz |
| Instrument Dimension | 340mm(L)×450mm(W)×1310mm(H) |
Standards
YY/T 1536-2017, T-CAMDI 021-2019
Configuration
Standard configuration: Instrument, Computer, Catheter Clip, Special Grips, Professional Software, Communication Cable, Water Circulated Temperature Control Device, Automatic Clamping Device
Optional configuration: Non-standard Fixture, Printer
FAQ
Are you a manufacturer or trading company?
We are the manufacturer and trading combo, which specialize in material testing instruments such as plastic package, medical device, facial mask, protective clothing and pharmaceutical package, etc. We located in Jinan, Shandong, China.
Do you have any certificate?
We have obtained CE certificate, passed ISO 9001, IPMS management system certificates, and have 18 utility model patents and 4 software copyright certificates.
How about the installation?
The user's manual specifies the installation requirements with details. We will advise the relative information in advance, such as power supply, space, required temperature, humidity, etc.
Do you have after-sales service?
We will carry out the equipment inspection before delivery. If the machine does not work properly, we can make a remote control service to help dealing with the failure. We promise to reply within 24 hours and provide solutions within 2 working days.
How about the warranty?
Our warranty is 12 months, lifelong free of charge! User just bear the materials cost and express charge out-of-warranty period.
How long does the delivery time?
For the regular machine, 3-5 working days. For the customized one, 30 days or so.
