High Voltage Power Transformer Manufacturer Oltc on Load Tap Changer Electrical Oil Immersed Transmission Distribution 110 121 132 220 230 Kv 63mva Transformer

Qinghao High voltage power transformers are essential in substations for electrical grids, connecting generating stations to transmission lines and then to distribution networks. They enable the efficient transmission of electricity across vast distances, reducing energy loss and ensuring reliable power supply to distant consumers. Normal High Votage range including 66kv, 110kv, 150kv, 220kv, etc.

High efficiency, low loss, low noise, strong load resistance and long service life.

Main Characteristics:
1. Designed by patented technology and software with premium performance.
2. Core is made of high quality cold-rolled grain-oriented silicon steel sheet which produced in step-lap technology.
3. Winding is using high strength enameled wire or paper-insulated wire or copper belt, which offers uniform distribution of ampere-turns, reasonable insulation structure with high ability to withstand short-circuit.
4. Oil tank is corrugated type with high corrosion resistance. Tank surface pre-treatment liquid and coating powder adopts international top brands. The tank is degreasing, pickling, phosphorated, electrophoresis by automatic production lines, then power spray coating and heat-solidify.
5. The active part applies core free-hanging structure. The gasket is made of high-quality acrylate rubber which can inhibit ageing caused by sun and heat.

Advantages:
1. Low loss, low noise, low partial discharge, high reliability.
2. Safety with elegant appearance.
3. Convenient installation and simple maintenance.
4. Compact with small occupied area.

Applications
1. Building Infrastructure and Industrial: Airports, hospitals, factories, shopping malls, hotels, commercial and residential towers.
2. Utility: Generation, transmission, distribution substations, water and waste water treatment plants.
3. Oil and Gas: Oil and gas plants, petrochemical plants and refineries.

Service environment:
1. Ambient temperature: Maximum +40ºC, Minimum -40ºC
2. Altitude: less than 1000 meters.
3. Seismic level: less than 3m/s2 at horizontal direction and less than 1.5m/s2 at vertical direction.
4. Installation environment: No obvious and heavy pollution, no explosive and corrosive gas and dust, with good air ventilation and no severe vibration and shock.
(Note: If the application environment is different from the above standard conditions, please contact for customized designs.)

Please check below quick links for other product types. 

Control Transformer	Oil Immersed Transformer	Dry Type Transformer
Substation Transformer	Switchgear	Distribution Cabinet

Main Components:

1. Core: Typically made of laminated steel sheets.
2. Windings: Primary Winding and Secondary Winding.
3. Insulation: To prevent electrical conductivity between windings and the core, and turns of the windings.
4. Tank: To house magnetic core and windings. 
5. Cooling System: Natural air cooling, forced air cooling, oil cooling with radiators, oil cooling with fans or heat exchangers.
6. Bushing: High voltage terminals are sealed with bushings to insulate and protect against environmental factors and ensure safe operation. 
7. Tap Changer: Maintain voltage stability despite fluctuations in load or input voltage.
8. Breather: Regulate the intake of air when the oil level expands and contracts due to temperature changes for oil transformer.
9. Conservator: Also called expansion tank to ensure the oil level remains constant in the main tank.
10. Buchholz Relay: A safety device that detects gas accumulation due to internal arcing or oil leaks, indicating a possible fault inside the transformer.

Qinghao Transformer is a reliable and specialized power transmission and distribution equipment manufacturer for over 20 years with a registered capital of USD8,000,000.

Except for ISO9001, ISO14001, ISO45001 certificates, we are also TUV audited suppliers with AAA enterprise and AAA products honors.  All products comply with GB and IEC related standards, which mainly include oil immersed distribution transformer, dry-type transformer, amorphous alloy transformers, combined transformer substations, circuit breaker, cable branch box, high low voltage switchgear cabinet distribution equipment. 

With the concept of "World-class transformers, smart solutions", Qinghao Transformer is devoting to provide high-quality power for customers.

Let us cooperate with a brighter future!

Q: Are you a Manufacturer or Trading company?  
A: We are the original factory with approved export license.

Q: What's your warranty terms?
A: We offer 24 months warranty time. 

Q: How long is the production time?
A: 25 to 45 days or depending on order requirements.

Q: What should provide to make custom transformer?
A: Technical drawing and specification documents are the best, or you can list key parameters for designing.

Q: How can I trust you?
A: We are TUV aduited supplier with many patent certificates, type test reports, CQC, CE, KEMA, ISO certificates. We can provide on site services for many areas like South America, Indonesia, etc.

https://qhtransformers.en.made-in-china.com/contact-info.html