Audited Supplier
XKP - 350/400/450/560/560D
2 Years
PLC
Automatic
Electric
Tire Recycling Machine
Scrap Tyre Recycling Plant Manufacturer Tyre Recy
Rubber Block, Rubber Mulch, Rubber Granule, Powder
Waste Car Tire, Truck Tire, OTR Tire, etc
Intelligent Fully Automatic Tyre Recycle Machine
Tyre Shredder, Rasper, Granulator, Powder Miller
as Your Request
Technical Support, Installation, etc
Mature Technology, Factory Price
100% Test Before Delivery
High Quality Material
About 2-3 Month Based on Machines
Simens PLC Control
Famous Brand Siemens
Use Famous Brand
Protective Way
HVST
Contanier
to be specified
Zhengzhou, Henan, China
8477800000
Product Description
Scrap Tyre Recycling Plant Manufacturer Tyre Recycling Machine Cost Tyre Recycle Machine for Make Different Size Rubber
HVST double shaft shredder is specially designed for tire chips size separation. The shredded chips from prime shredder will drop on the rotary screen, and small chips will fall on the conveying belt, the big chips will be feed in the shredder for shredding and recycling again. The final chips will be around 50~60mm.
Model | Input size | Output size | Capacity | Motor | Weight |
TS-800 | 800mm | 50*50mm | 1-2t/h | 2*22kw | 8t |
TS-1200 | 1200mm | 60*60mm | 3-5t/h | 2*37kw | 14t |
TS-1600 | 1600mm | 50-150mm | 6-8t/h | 2*45kw | 18t |
TS-1800 | 1800mm | 50-150mm | 7-10t/h | 2*55kw | 23t |
1.Provide the floor space and size required for recycling machine.
2.Provide the complete recycling line layout and its 3D drawing
3.After machine reach the customer's working site, We will assemble the main parts, then mark all the joint parts and send videos to guide the installation and training
PLC Fully-automatic Production Line
1.Conveyor-Transport the tire to the shredder; 2.Double shaft shredder---Shears the tire into 5-10 cm blocks;
3.Recirculation system---To control the size of shreds going to the raspers;
4.Raspers-Reduce the shreds into 15-20 mm chips and liberates steel from the rubber;
5.Over belt magnet--Separation of liberated steel from the rubber chips;
6.Vibratory feeder--Transports the rubber chips;
7.Granulator--Size reduction of the chips to 1-4 mm granules and liberates the textile fraction to air flow separation.
8.Vibratory screen-Sorts the granules by size and removes the majority of textile;
9.Classifer-Removal of remaining textile; Drum magnet-Removal of remaining steel fines;
10.Central de-dusting unit--Remove dust and fines from the system and filter the air before returning it to the atmosphere.
Flow chart of tire recycling (Fully-automatic Production Line): Waste tire - Tire debeader- whole tire cutting - tire shredder - Rubber crushing - magnetic separator - fiber separator - Rubber powder
Flow chart of semi automatic tire recycling line Whole tire--tire circle cutter--tire strip cutter--tire slice cutter--rubber crusher--Magnetic separator--Nylon fiber separator--rubber powder
3.Recirculation system---To control the size of shreds going to the raspers;
4.Raspers-Reduce the shreds into 15-20 mm chips and liberates steel from the rubber;
5.Over belt magnet--Separation of liberated steel from the rubber chips;
6.Vibratory feeder--Transports the rubber chips;
7.Granulator--Size reduction of the chips to 1-4 mm granules and liberates the textile fraction to air flow separation.
8.Vibratory screen-Sorts the granules by size and removes the majority of textile;
9.Classifer-Removal of remaining textile; Drum magnet-Removal of remaining steel fines;
10.Central de-dusting unit--Remove dust and fines from the system and filter the air before returning it to the atmosphere.
Flow chart of tire recycling (Fully-automatic Production Line): Waste tire - Tire debeader- whole tire cutting - tire shredder - Rubber crushing - magnetic separator - fiber separator - Rubber powder Flow chart of semi automatic tire recycling line Whole tire--tire circle cutter--tire strip cutter--tire slice cutter--rubber crusher--Magnetic separator--Nylon fiber separator--rubber powder
2.Rasper
It is specially designed to remove wire steel from tire, and process the rubber chips from tire shredder into wire-free rubber mulch 10-30mm.The main rotor housing is equipped with replaceable wear plates to increase the durability and longevity of the cutting chamber.
| Model | R-315 | R-132 | R-90 | R75 | R55 | R45 |
| Capacity | 3-6t/h | 1.5-3t/h | 1-1.5t/h | 700kg-1t/h | 500-700kg/h | 300-500kg/h |
| Poder | 315kw | 132kw | 90kw | 75kw | 55kw | 45kw |
| Weight | 2400kg | 6100kg | 4200kg | 3500kg | 1850kg | 1700kg |
| Voltage | As request | |||||
| Size | 10-30mm | |||||
It is designed to process the rubber mulch into 1-6mm rubber granule, and separate the nylon fiber.
The Granulators are designed to grind the rubber mulch from the Grater into small granules as fine as 1mm. The granules are screened and re-circulated until the desired size is reached. Due to the design of the Granulator and precise alignment of the blades, the Granulator produces a very uniform cut and high quality granule.
| Model | G-90 | G-45 | G-37 |
| Power | 90kw | 45kw | 37kw |
| Capacity | 800-1500kg/h | 500-800kg/h | 300-500kg/h |
| Final size | 1-6mm | 1-6mm | 1-6mm |
| Weight | 5600mm | 3300mm | 2950mm |
It is designed to process the rubber granule into fine rubber powder 30-120mesh as request. With advanced technology, automatic feeding system.
If you need rubber granule with a mesh size <20, please choose our
RUBBER GRANULE PRODUCTION LINE
Rubber Granule Sze: 1-5 mm
Crush tire blocks(3-5cm) into 1-6mm rubber granules and separate the steel wire and nylon fiber from the rubber granule to get pure finished products. It can produce 1-2mm 2-4mm 4-5mm three different size granules at the same time.
If you need rubber powder with a mesh size ≥20, please choose our
RUBBER POWDER PRODUCTION LINE
Rubber Powder Size: 20-40 Mesh(Normally)
Crush tire blocks(3-5cm) into rubber powder and separate steel wire and nylon fiber from rubber powder to get pure finished products.
If you need rubber powder with a mesh size 20-120 mesh
the Fine Grinder System is needed.
Rubber Powder Size: 20-120 Mesh (According to customer requirements)
The fine grinder is applied to crush rubber powder or rubber granule into more smaller size and it can reach 120 mesh.
Zhengzhou Harvest Machinery Co., Ltd
HVET's main focus is to provide our customer cost-effective waste recycling system applied in all kinds of waste recycling like tire/plastic/wood/metal/car/pcb board recycling and could provide output products like chips(50-150mm), mulches( 10-30mm), granules (1-6mm), powder (30-120 mesh) and other size as customer required. HVET also offers machines for specialized markets. The most important to theHVET family of products is the Tire Shredding System. These machines are designed to process used car and truck tires. We offer complete systems to produce separated crumb or powder.
1. who are we?
We are based in Henan, China, start from 2013,sell to South America(20.00%),Africa(20.00%),Southeast Asia(20.00%),North America(10.00%),Western Europe(10.00%),Eastern Europe(10.00%),Mid East(10.00%). There are total about 11-50 people in our office.
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Waste Tire Recycling Machine/Rubber Crusher/Tire Shredder/Tire Crusher/E-waste Recycling/Metal Shredder/Plastic Recycling/Cable Wire Recycling/Wood Shredder, Waste Tire Recycling Machine/Metal Shredder/PCB Recycling/Copper Wire Recycling/Plastic Recycling/Wood Shredder
4. why should you buy from us not from other suppliers?
1.Our factory established in 1987, With nearly 30 years experience 2. All machines are 2 years warranty 3. Competitive price with high quality 4.We got SGS inspection certificate and CE certificate 5. Factory visited is welcomed
5. what services can we provide?
Accepted Delivery Terms: FOB,EXW;
Accepted Payment Currency:USD,EUR;
Accepted Payment Type: T/T,L/C,Western Union,Cash;
Language Spoken:English,Chinese,Arabic,Korean
