Audited Supplier
FORWARD RX44x160 HDD Drilling Rig
* Frame slides (using hydraulic cylinder) to change drilling angle
* Big capacity of mud pump
* Control of drill rods' untwisting
* Complex preheating system of engine air manifold and hydraulic oil
* Control cabin with air condition and heating system
* Video monitor, recording device and exterior cameras
* Cabin can be rotated for operator's convenience
* Regulator of drilling fluid in cabin
* Hydraulic ball valve on mud pump saves drilling fluid while drill rods' changing
* Lubrication mechanism of drill rods' thread joints
* Hydraulic manipulator
* Rack bar heating
| Diesel engine | |||
| Mode | WEICHAI-STEYR | ||
| Power | 243 kW | ||
| Cylinders | 6 | ||
| Rotation | 2200 rpm | ||
| Cooling type | Water cooling | ||
| Fuel consumption | 19-27 L/h | ||
| Rotation | |||
| Gears | 2 | ||
| Low Speed | Rotation Speed | 0-80 rpm | |
| Maximum Spindle Torque | 19000 Nm | ||
| High Speed | Rotation Speed | 0-160 rpm | |
| Maximum Spindle Torque | 9000 Nm | ||
| Thrust and pullback | |||
| Move Speed | 2 | ||
| Low Speed | Thrust force | 450 kN | |
| Pullback force | 450 kN | ||
| Speed | 0-12 m/min | ||
| High Speed | Thrust force | 225 kN | |
| Pullback force | 225 kN | ||
| Speed | 0-24 m/min | ||
| Carriage acceleration | + | ||
| Other parameters | |||
| Crane | Lifting capacity | 3200 kg | |
| Mast heating | + | ||
| Drilling angle | 7,5-16° | ||
| Clamping system | Jaws clamping spindle torque | 25000 Nm | |
| Jaws reducing spindle torque | 50000 Nm | ||
| Mud pump | Maximum capacity | 600 L/min | |
| Maximum pressure | 12 MPa | ||
| Motion | Motion speed | 0-3 km/h | |
| Maximum elevation angle | 25° | ||
| Drll rod | Length | 4500 mm | |
| Rod lock | 0105 mm | ||
| Rod body | 089 mm | ||
| Max bending | 5% | ||
| Weight | 105 kg | ||
| Loading capacity of drill rods holder | 10 pc | ||
| HDD rig weight | 21000 kg | ||
| Dimensions(L×W×H) | 9,20×2,50×3,08 m | ||
| Diesel engine preheating | + | ||
| Hydraulic system preheating | + | ||
| Drill rods supply system | + | ||
| Drill rods lubrication system | + | ||
| Fuel tank capacity | 420 L | ||
| Hydraulic tank capacity | 526 L | ||
FORWARD GROUP mainly produces:
- Coring Drill Rig (for mineral geological core drilling)
- Water Well Drill Rig (for water well drilling)
- Horizontal Directional Drill Rig (for underground pipe laying)
- Multifunction Top Drive Drill Rig (for coalbed methane exploration, water well, rescue well, shallow oil and gas drilling)
- Auxiliary drill tools and spare parts (for drilling rigs)
Forward Group is an international group company whose main business focuses on underground driling equipment and auxiliary tools. With the mission of maximizing the value of customers, the company provides high-quality underground driling equipment and tools, and strives to help customers achieve the best economic benefits.
1. Long-term cooperation with numerous customers
2. Participation in renowned drilling rig industry exhibitions around the world
3. More and more customers become friends with us and visit the factory on site.
→ Welcome to our Factory!
FORWARD GROUP is an international company designing and producing the drill rigs. The mission of the company is to provide high-quality drilling equipment and related services.
FORWARD GROUP mainly produces:
- Coring Rig
- Water Well Rig
- Horizontal Directional Drill Rig
- Multifunction Top Drive Drill Rig
- Auxiliary drill tools and spare parts
The company pays a lot of attention to the technical innovations and products development. We have design and engineering teams in the world. And with our global supplier to make the high-quality production.
FORWARD GROUP provides:- High Quality Drilling Equipment
- Full Technical Support and Service
- Spare parts, Drill Tools and Consumable Materials
- Training and Consulting Services
Q 1. What guarantees do you give for equipment?
A We have a 24-hour customer service, ready to fulfill all warranty liabilities anywhere in Russia.
Q 2. Can you train our team?
A With the purchase of equipment we provide free theoretical and practical training and carry out technical support on the first
project.
Q 3. Why FORWARD factory is located in China?
A The decision to place FORWARD production site in China was taken by FORWARD Group management not by chance. We strove to produce
high quality equipment, keep the low prices and ensure high production rate. At the present time, perhaps, only China provides the
best opportunities in the terms of production time, quality and prices.
Q 4. What are the advantages of FORWARD HDD rigs?
A FORWARD HDD rigs have exclusive power; the operation of rigs on real sites has shown that for many specifications actual values
exceed the nominal ones. Special functions of thrust force and rotation acceleration significantly increase the efficiency of
work.
Q 5. Can you produce drilling equipment according to our technical specification?
A FORWARD factory accepts orders for the production of drilling equipment according to your individual project. Drilling rigs with
pulling capacity from 100 tons could be designed according to your technical specification. Besides, there is a range of options
and special functions available on all drilling rigs. We are ready to take into account your wishes and release unique equipment
for you.
Q 6. Why does the cost of FORWARD equipment different from Chinese?
A In the production of FORWARD equipment we use only the best European and American components. At the same time, the assembly
work is carried out in China to guarantee our customers the reasonable price without loss of quality.
Q 7. Is FORWARD Chinese equipment?
A FORWARD equipment was developed by a Russian company in partnership with German engineers. The head office and warehouse of the
factory are located in Kazan, Russia. We placed our factory in China due to optimize the transportation and assembling cost.
