Audited Supplier
Marine anchor windlass is a machine that restrains and manipulates the anchor chain and/or rope on a boat, allowing the anchor to be raised and lowered. A notched wheel engages the links of the chain or the rope. A "trawl windlass" is a similar machine that restrains or manipulates the trawl on a commercial fishing vessel. The trawl is a sort of big fishing net that is wound on the windlass. The fishermen either let-out the trawl or heaves-up the trawl during fishing operations. A brake is provided for control and a windlass is usually powered by an electric or hydraulic motor operating via a gear train
Windlass can be divided into horizontal windlass and vertical windlass according to arrangement.The horizontal windlass is widely used in modern transport ships.For the convenience of mooring and unmooring operation and adjusting the force of cable, modern ships often adopt the combination of anchor and mooring winch, which combines the anchor winch and mooring winch.In addition to the auxiliary reel at the end of the spindle, a mooring winch (main reel) is provided on the windlass spindle, which, like the sprocket wheel, is driven by the spindle and controlled by a separate clutch and brake.Close the clutch and twist or loosen the rope.After the cable is tightened, the brake is tightened to maintain the stress state of the cable without being moved to the bollard.
Generally, the installation of the windlass should ensure that the three points of the anchor chain leading out (the anchor chain barrel, the chain controller and the sprocket) are in one line
Work load: refers to the tension measured at the outlet of the anchor chain wheel.
Overload tension: the short time overload capacity required by the windlass.
Average speed: the speed at which two anchor chains are recovered when three are in the water and are freely suspended.
Support load: refers to the maximum static load on the anchor chain that the anchor chain wheel brake should be able to bear.
1) Drive: Hydraulic
2) Configuration: Horizontal arrangement
3) Rope drum: Steel wire rope
4) Rope speed: Complying with ISO requirements
5) Rate pull (1st layer): 130 Tonnes
5) Clutch: Hydrulic operated
6) Brake: Hydraulic operated band failsafe brake
7) Brake Holding: 1st layer static up to 200Tonnes or complying with ISO/ Classification Society requirement
8) Control: Local/ remote control
2. Standard roller tensioner and drum brake provide optimal rope winding
3. Mechanically locked clutch with smooth action.
4. Efficient planetary gear design allows for long-term lubrication with grease
5. Easy access and servicing; all internal components are available as complete assemblies
6. Large drum diameter for longer wire rope life with less kinking; SAE J706 compliment
7. Automatic, spring applied disc brake; highly reliable and robust; complies fully with ISO CE standard
We have many models and OEM services are available, welcome to contact us for winch designs and quotations!
Hydraulic Winch:
| Model | Dian of chain wheel(mm) | Working load(kn) | Overhead pulling force(kn) | Holding load(kn) | Nominal speed(m/min) | Warping load(kn) | |||
| AM2 | AM3 | AM2 | AM3 | AM2 | AM3 | ||||
| 17.5 | 17.5 | 13 | 14.6 | 19.5 | 21.9 | 80 | 115 | 9 | 8 |
| 19 | 19 | 15.3 | 17.2 | 23.0 | 25.8 | 95 | 135 | 9 | 10 |
| 20 | 20 | 17.9 | 20.0 | 26.9 | 30.0 | 110 | 157 | 9 | 10 |
| 22 | 22 | 20.6 | 23.0 | 30.9 | 34.5 | 126 | 180 | 9 | 15 |
| 24 | 24 | 24.5 | 24.4 | 36.8 | 41.1 | 149 | 214 | 9 | 20 |
| 26 | 26 | 28.7 | 32.1 | 43.1 | 48.2 | 175 | 150 | 9 | 20 |
| 28 | 28 | 33.3 | 37.2 | 50.0 | 55.8 | 202 | 289 | 9 | 20 |
| 30 | 30 | 38.3 | 42.8 | 57.5 | 64.2 | 231 | 330 | 9 | 30 |
| 32 | 32 | 43.5 | 48.6 | 65.3 | 72.9 | 261 | 374 | 9 | 30 |
| 34 | 34 | 49.1 | 54.9 | 73.7 | 82.4 | 294 | 421 | 9 | 30 |
| 36 | 36 | 55.1 | 61.6 | 82.7 | 92.4 | 329 | 470 | 9 | 30 |
| 38 | 38 | 61.4 | 68.9 | 92.1 | 103.4 | 365 | 522 | 9 | 40 |
| 40 | 40 | 68 | 76.0 | 102.0 | 114.0 | 402 | 576 | 9 | 40 |
In order to send you a most suitble model we need confirm the following information.
1), what is the winch pulling capacity?
2),what is the winch wire rope length?
3),what is the wire rope diameters?
4)You need the winch with single or double drum?and per drum pulling capacity?
5),what is the winch working environment?
6),Are you need power pack?
