Audited Supplier
High Temperature Resistant PTFE Film Teflon Tape
PTFE THREAD SEAL TAPE is one kind of novel ideal seal material, the best material of anti-corrosive performance. It displays inertia to the majority chemicals and the resolver. And it has the ability to resist strong acid and alkali, water and the organic solvent. As a sealing filler for pipeline connections, PTFE tape can effectively prevent water leakage. It is wrapped around the joint of the pipe fitting that needs to increase the sealing effect, ensuring the airtightness of the pipeline by increasing the sealing effect.
| Introdution | |||||||
| Specification | Width: 3 - 100mm(routine :12mm,19mm,25mm) | ||||||
| Thickness:0.07-0.2mm(routine:0.07mm,0.075mm,0.1mm) | |||||||
| Length:4--50m(260",480",520") | |||||||
| Density:0.15-1.2g/cm3 | |||||||
| Special length, thickness, density are available upon request. | |||||||
| Materials | 100% PTFE without oil | ||||||
| Color for tape | White tape or colour tapes | ||||||
| Color for shell | Various plastics colors are available upon request. | ||||||
| Port | Shanghai or Ningbo (Any main China port) | ||||||
| MOQ | 50000pcs | ||||||
| Delivery time | 15 -30 days after receiving the deposit or L/C | ||||||
| Advantages | competitive price&good quality&delivery on time | ||||||
| Certificate | ISO 9001, CE, etc. | ||||||
| Technical parameters | |||||||
| Heat resistance | +370 degree centigrade | ||||||
| Cold resistance | -190 degree centigrade | ||||||
| Pressure resistance | up to 30 bar | ||||||
| Tensile strength | >=8Mpa or control according to the demand | ||||||
| Percentage elongation | >=25% | ||||||
| Feature | easier to wrap under any environment | ||||||
| Detailed specification | |||||||
| Style No. | Width | Thickness | Length | Density | |||
| SS -01 | 12mm | 0.075mm | 4m | 0.15g/cm3-1.2g/cm3 | |||
| SS -02 | 12mm | 0.075mm | 5m | ||||
| SS -07 | 12mm | 0.075mm | 10m | ||||
| SS -08 | 1/2" | 0.075mm | 260" | ||||
| SS -13 | 1/2" | 0.075mm | 480" | ||||
| SS -14 | 1/2" | 0.075mm | 520" | ||||
| MS -18 | 12mm | 0.1mm | 10m | ||||
| BS -35 | 12mm | 0.1mm | 30m | ||||
| BS -38 | 12mm | 0.075mm | 50m | ||||
| BS-40 | 12mm | 0.2mm | 20m | ||||
| SS -42 | 19mm | 0.075mm | 10m | ||||
| SS- 44 | 3/4" | 0.075mm | 520" | ||||
| MS- 47 | 19mm | 0.1mm | 18m | ||||
| BS- 51 | 19mm | 0.075mm | 40m | ||||
| BS- 56 | 19mm | 0.2mm | 20m | ||||
| BS- 60 | 19mm | 0.2mm | 35m | ||||
| SS-64 | 25mm | 0.075mm | 10m | ||||
| BS-71 | 25mm | 0.075mm | 40m | ||||
| BS-72 | 25mm | 0.2mm | 10m | ||||
| BS-76 | 25mm | 0.2mm | 35m | ||||
| Special length, thickness, density are available upon request. | |||||||
How to use ptfe thread seal tape?
1. Remove foreign objects from the connecting parts and keep them clean.
2. Pay attention to the wrapping direction. Taking the angle valve as an example, when the angle valve is screwed into the inner thread of the wall, it rotates clockwise to the right. The direction of wrapping the raw material tape on the angle valve is counterclockwise to the left. This way, when the angle valve is screwed, it will become tighter and will not loosen.
3. When wrapping, tighten the PTFE thread seal tape to make it tightly adhere to the thread, try to tighten it as tightly as possible, and do not loosen it. After wrapping, use your hands to rotate and press it tightly, or you can wrap it while pressing it.
4. As for the number of layers of wrapping, there is no strict regulation, which should be able to be tightened without leakage. However, based on experience, it is usually necessary to wrap more than ten times to ensure the sealing effect.
5. When tightening the thread, do not tighten it too hard. Just use a little force and it doesn't necessarily have to be too tight to prevent leakage. As long as the hand feels strong when tightening, it is sufficient.
(1) High pressure can stand: PN10, PN16, PN35, PN40; 150psi, 235psi etc, as customers' request;(2)Well and high quality control, within 1% leakage;
(3)Environment friendly, non-toxic, good looking and long service life;
(4) Light weight, easy to handle and transport;
(5) Soft colors and excellent design, suitable for installation either exposed or hidden;
(6)Wonderful ability in chemical corrosion resistance;
(7) Easy and fast installation, making cost minimized;
(8) Widely used in building, irrigation, industry and swimming pool;
(9)Small order acceptable;
(10) Customer's design and logo are welcome.
B Why choose QX?
(1) We provide OEM service and submit Various styles, latest designs to our clients;
(2) We work with big customers in Southeast Asia, Africa, Middle east, North America, South America;
(3) According to the needs of customers in different regions, we match different quality and thickness valves with various styles, so that our customers are very competitive in the market!
(4) Our high quality PVC valve can be consistent with European and American national brand valves!
(5) We have great experience on providing high quality products and most professional service to clients about 10 years more!
(6) Customers choose our products, can mix and match our PVC pipe fittings, PVC butterfly valves, PP Fittings, irrigation products to buy together, so that the customer product line is more abundant, both quality and delivery time are guaranteed.
(7) We can flexible from China any port export ! Welcome you inquiry us!
