Audited Supplier
LD15603550T600
Three-Phase 380V
Three Sets of Lights
6kw*3PC
365nm
600mm
450mm
50mm(Not Adjustable)
300mm
0.5-7m/Min
Milky
280kg
LANDUN
Wooden Case
2400mm*900mm*2150mm
China
8543709990
Product Description
Can be customized according to customer needs!!
Product introduction
The principle of UV curing is that ultraviolet rays are irradiated with special glue to cause polymerization of the glue to solidify. Different sizes of cured articles require different sizes of curing machines.Portable style, desktop case style, hanging style for industrial production, and large curing machine for large items.The speed adjustment drive keeps the speed of the conveyor belt uniform under different loads of UV machine.The UV machine is equipped with a high-intensity light source.
Parameter list
Note:Can be customized according to customer requirements
Application example
Specially used for uv curing of electroacoustic components, such as loudspeaker, receiver, speaker, microphone, hands-free headset, vibration motor, EL, LENS... UV adhesive curing application.
Typical characteristics
It is one of the preferred products of electroacoustic component manufacturers, with excellent cost performance.
It USES high-intensity ultraviolet light source configuration, combined with UV cold mirror, IR filter optical lens and other optical technology to process the heat produced in the process of ultraviolet radiation for scientific treatment, to achieve high ultraviolet energy, low temperature effect, to overcome the loss of product deformation.
Usually, the magnetic property of electroacoustic components will decrease or even lose its magnetic property after reaching a certain temperature. This model can completely ensure the device to be cured at the same time at a low temperature, so as to avoid losing or reducing its magnetic property, thus improving the product qualification rate and reducing the cost.
Product advantages
The machine has beautiful appearance, light weight, space saving, wide application, reliable quality, safe use, convenient operation, etc.The high-quality high-efficiency lamp is used, and the lamp room is forced to exhaust heat to extend the service life of the lamp and protect the dry items from heat deformation. Optional quartz filter for cooling.
Product pictures
Our service
Product introduction
The principle of UV curing is that ultraviolet rays are irradiated with special glue to cause polymerization of the glue to solidify. Different sizes of cured articles require different sizes of curing machines.Portable style, desktop case style, hanging style for industrial production, and large curing machine for large items.The speed adjustment drive keeps the speed of the conveyor belt uniform under different loads of UV machine.The UV machine is equipped with a high-intensity light source.
Parameter list
| Project name | Technical Specification | Brand |
| Application | solidify | landun |
| Type | Uv lamp Conveyor machine | |
| Model | LD15603550T600 | |
| Major configurations | ||
| Wavelength | 365nm | |
| Uv lamp total lenth | 550mm | |
| Uv lamp curing lenth | 450mm | |
| Max thickness of cured | Curing products are recommended within 400mm | |
| Uv lamp power | 5.6kw * 3 lamps | |
| UV lamp installation location | At the top, ultraviolet light shines down | |
| Control UV lamp mode | 1)UV transformer and UV capacitor,50HZ 380V 2)UV lamp power strong light, low light adjustable 3)UV lamp is controlled separately | |
| lamphose |
| |
| structure of equipment | ||
| Machine outside size | L2400*W900*H12150mm | |
| Feeding width | 600mm | |
| Belt width | 600mm | |
| Conveyor Material | Stainless Steel Mesh Belt or Teflon Mesh Belt (can choose) | |
| Product height | 0-200mm (Adjustable ) | |
| Curing furnace length | 900mm | |
| Inlet and outlet length | 450mm | |
| Uv blocking length | 300mm | |
| conveying speed | 0.1 to 7M/min (stepless Adjustable ) | |
| Conveyor height | 1)The conveyor belt is designed to be 750 mm above the ground 2)Plastic cup with brake casters. | |
| Control system | ||
| Operating mode | Manual operation | |
| Input voltage | 380V 50/60HZ | |
| Cooling way | Air | |
| Packing | ||
| Packing | Wooden box package | |
| Weight | About 340kg | |
| Warranty | 1 years | |
Note:Can be customized according to customer requirements
Application example
Specially used for uv curing of electroacoustic components, such as loudspeaker, receiver, speaker, microphone, hands-free headset, vibration motor, EL, LENS... UV adhesive curing application.
Typical characteristics
It is one of the preferred products of electroacoustic component manufacturers, with excellent cost performance.
It USES high-intensity ultraviolet light source configuration, combined with UV cold mirror, IR filter optical lens and other optical technology to process the heat produced in the process of ultraviolet radiation for scientific treatment, to achieve high ultraviolet energy, low temperature effect, to overcome the loss of product deformation.
Usually, the magnetic property of electroacoustic components will decrease or even lose its magnetic property after reaching a certain temperature. This model can completely ensure the device to be cured at the same time at a low temperature, so as to avoid losing or reducing its magnetic property, thus improving the product qualification rate and reducing the cost.
Product advantages
The machine has beautiful appearance, light weight, space saving, wide application, reliable quality, safe use, convenient operation, etc.The high-quality high-efficiency lamp is used, and the lamp room is forced to exhaust heat to extend the service life of the lamp and protect the dry items from heat deformation. Optional quartz filter for cooling.
Product pictures
Our service
1.Provide pre-sale and after -sale technical consultation. 2.Provide 24 hours consultations technical support after sale. 3.Provide technical support for training technicians. 4.Provide technical consultation and support for mechanical equipment. 5.Provide UV equipment configuration improvement , installation proposal technical support. 6.In general, door-to-door service is not supported. If door-to-door service is required, a round-trip fee for personnel is required. 7.Normal use of the machine quality problems limited free warranty for 1 to 5 years, lifelong maintenance services, parts of the parts of the supplier to provide free on-site service. |
