BS Standard Forged Steel Double Coupler/Right Angle Clamp/Clip for Construction Scaffolding Tubes

Tube and fittings scaffolding is a traditional scaffolding, all the tubes are joined by clamps vertically and horizontally. Clamps are fixed by screwed T bolts. The diamater of the tubes is usually 48.3mm, so the diameter of the clamps are also of 48.3mm. It is widely used in commerical construcion, residential construction, industrial construcion, oil and gas industry, bridge construction etc.

This fixed double coupler is used to connect two tubes at 90 degrees (crossed). Once the bolt and nut are tightened, it is very strong can load at least 100 KN.
1) Raw material: Q235 steel bar
2) Processing method: drop forged
3) Diameter: 48.3mmx48.3mm
4) Finishing: zinc plated
5) Processing capacity: 25 containers per month
6) Test Standard: EN74-1 B
7) Package: plastic woven bags and steel pallet.
 

We check:
We check each piece on each procedure to make sure that each piece that we will send out is 100% up to standard.

We Test.
Each batch will be tested in our own test laboratory to double assure that each batch is correct and 100% up to standard.

Our forging dies.
Almost all types of forged couplers can be made. We also have the capability to develop and design new items according to customers' requirements.
 

 Standard Package: plastic woven bags and steel pallet.

Customized packages are also available.

Rizhao Weiye Tools Co.,Ltd. is  a leading manufacturer of system scaffoldings and accessories, forged couplers,  plank, shoring props, formwork accessories, fences, ladders, frame scaffolding and other related products in Rizhao City, Shandong, China.
 
We have been in the business for 25 years, and all our products are BS 1139 and EN 74, AS 1576 certified, the quality is very good. Our products are very popular in European countries, Australia, North America, Mid-east countries, and South East Asia and some African countries, etc.
 
Currently, we have well-trained workers of more than 300, advanced forging lines of 10 and many other advanced equipment. We are also capable of tooling designing, performance testing, new products researching and developing. We have two factories taking up to 160000 square meters. With years of development, we can reach a production capacity of more than 20 containers per month. We are growing all the time.
 
We have our own zinc plating and powder coating workshops and cast steel/cast iron part processing workshop, which enable fastest delivery and most consistent quality of the products.

We are looking forward to establishing long term business relationship with you in the near future!
 
Main Business:
1. System scaffolding:
 Include: Kwikstage system scaffolding and accessories; Ringlock system scaffolding and accessories; Cuplock system scaffolding and accessories; Haki system scaffolding and accessories.
2. Couplers/Clamps:
We can manufacture all kinds of drop forged or pressed couplers, include: British type couplers, Italian type couplers, German type couplers, American type couplers, and many other kinds of couplers as per your drawings.
3. Façade scaffolding:
Mainly include: European Façade Scaffolding, Italy type Façade Scaffolding, and some domestic frame scaffolding.
4. Shoring Props
Quality shoring props of different specifications can be manufactured in our factory.
5. Planks/ Toe Board:
 Both aluminum and steel planks can be manufactured automatically in our factory.
6. Formwork Accessories:
  Both Forged wing nut and casted wing nut, steel rebar tensioner, Rapid Wedge Clamp and some other formwork accessories.
6. Others
We can also manufacture fences, ladders, steel trays/stillages and other related products that are needed in the erection of scaffolding.
 
 Factory Gallery:
 

 Q 1, Are you a factory or a trading company?

☆All Incoming Raw Materials Inspection:

>>All Raw Materials come with mills certificate. Apart from this, our quality control personnel will also conduct inspection on each batch.

>>After that, all raw materials check result are recorded and documented well to make sure that each batch of products that we make are traceable.
 

☆ Advanced Equipment to Achieve the Fastest Delivery
>>  10 sets of mechanical arm welding machine to help achieve the fastest delivery. At least 3 times faster that hand welding;
>> 6 sets of high speed laser cutting machine to do the work of drilling and cuttings. With those machine we can not only increase the production efficiency( 5 times faster that traditional cutting) but also improve the accuracy of the parts.
>>2 advanced automatic production lines to produce steel planks and aluminum planks, at least 10 times faster than traditional method. Your steel planks orders can always expect the fastest delivery.
 

• Each batch were clearly labeled after inspection:

>> Each batch of parts are clearly labeled after regular inspection. If there is any item that fails the inspection, clearly marked to repair or discard.
 

• Regular Inspection on Each Procedure and Final Test in our Laboratory:

>> We check or inspect on each procedure during the production. And we do the final test in our own test laboratory to make sure that each piece that we are sending to our customers is 100% correct and up to the standard.