Audited Supplier
3D welding table accessories 28mm table locating clamping tools
3D welding table support kit is mainly used to connect D28 D16 welding workbench, extend the workbench surface, support and position large welding products.
Like the welding platform, all fixtures have two surface treatments: nitriding or non-nitriding. Generally, non-nitriding (blackening) is more common.
D16/D28 clamp assembly includes:
Support angle iron
U-shaped/L-shaped square box
Quick locking pin
Magnetic clamp
Telescopic compression parts
Accessory cart
V-shaped positioning block
angle locator
Positioning ruler/square
| Name | Note | Size |
| U Square box | Cast iron/Steel | 1000/1200/1500/2000/2400/3000/4000*200*200mm |
| L Square box | Cast iron/Steel | 500/1000/1200/1500/2000*200*100mm |
| Support angle iron | Cast iron/Steel | 300*275*100/600*375*100(Left/Right) |
| Protractor | 500*100*100mm | |
| Support frame | 150*150*75*45 degree(have many other sizes) | |
| Positioning square | Black/Nitriding | 75*50*75/175*50*75(hole-hole/groove-groove) |
| Positioning ruler | Black/Nitriding | 275*50*175mm and many other sizes |
| Plane ruler | Black/Nitriding | 500*375*25mm |
When purchasing a 3D flexible welding platform, how to distinguish the advantages and disadvantages of the platform?
1. Appearance
There are a large number of casting pores and blisters, and the surface is prone to oxidation and corrosion (even if repair welding is used, obvious traces of different colors will be seen).
2. In order to reduce costs, many 3D 2D welding table manufacturers do not perform heat treatment aging. Tables and clamping tools are easy to deform and break; the processing accuracy is uncertain, and flatness, verticality, hole spacing, etc. cannot be determined.
3. The non-working surface was not shot blasted and sand cleaned, and only simple spraying was performed, so the paint would easily fall off.
4. The surface of low-grade cast iron is not bright but dark gray (in order to reduce the cost, HT100-150 inferior material is used).
5. The panel thickness of the three-dimensional flexible welding platform is insufficient (D28 system thickness is 25mm/D16 system thickness is 12mm) and the thickness is uneven; the ribs on the back are few and thin, rough and unclean!
What products or services does your company provide?
1. Fixture standard parts and mold components.
2. Design scheme and project implementation of special fixtures.
3. Establish a 3D database of standard parts for fixture design for enterprises.
4. Help enterprises to establish fixture workstations and departments. Meet the needs of enterprises for flexible production
What are your company's products? How many models are there?
1: Standard category: toggle clamps, positioning quick clamps, corner cylinder clamps, flexible combined welding fixtures, machine tool fixtures, special welding fixtures, testing fixtures, combined aluminum profiles. Thousands of models.
2: Special fixture project
What is the difference between 16 series and 28 series of three-dimensional flexible fixtures?
The main reason is that the aperture of the working platform is different, the 16 series is 16mm, and the 28 series is a straight hole of 28mm.
The 16 series is mainly used in the welding and assembly of smaller workpieces; the 28 series is mainly used in the welding and assembly of larger workpieces.
Why not other diameters?
Combined with common tool size and mechanical knowledge, it is only divided into these two models, and these two models can meet the needs of most production.
How to choose the aperture size?
The diameter is mainly selected according to the size and weight of the product.
What is the difference between a 2D platform and a 3D platform?
The 2D platform can only be assembled with more product shapes than the 3Dvariety, while the side of the three-dimensional platform can extend its work surface through accessories.
The 2D platform and the 3D platform are just a little more material around, why is there such a difference in price?
The four sides of the three-dimensional platform and the upper plate are polyhedral processing, and its processing difficulty is more than twice that of two-dimensional. Due to the high precision requirements of the platform, the heavy weight and the difficulty of subsequent finishing, these aspects increase the manufacturing cost.
Committed to the design and manufacture of various CNC cutting equipment, steel structure production lines,pipe welding machines,straight or circular seam welding machines,welding rotator,welding positioners, complete sets of welding equipment etc.
Relying on advanced concepts, excellent technology, and exquisite craftsmanship, the company has formed a multi-variety and multi-series product structure.
Our products serve construction machinery, construction machinery, boilers and pressure vessels, steel structures, wind power and other industries, and the products are exported to Southeast Asia, the Middle East, Europe and the United States and many other countries.
