Audited Supplier
PPM-T293A
Strain Pressure Sensor
Hammer Union
Strain Pressure Sensor
Analog Type
Normal Wirewound
Stainless Steel
Hammer Union
6-Wire
Wet Soil,Oil,Corrosive Liquidand Gas
IP67
CE
Customized
CSPPM
Standard Package for Exporting
2.8kg
Changsha, China
9026900000
Product Description
Description
The Model PPM-T293A pressure transmitters have been designed specifacally for oil field application. These pressure transmitters provide different kinds of signal output, including 4-20mA, 1-5VDC, 0-10VDC etc. The model PPM-T293 has wide measuring ranges from 0…5000PSI to 0…45000 PSI, and it features fast dynamic response speed, high accuracy, strong anti-fatigue. The hammer union pressure fitting makes it easy to install and convenience to use at oil well driling and servicing.
Features
1.High accuracy: 0.25%FS or 0.5%FS2.Shock and vibration resistant
3.Pressure up to 45,000 PSI
4.Hammer Union pressure fitting
Applications
Oil well drilling and servicing, Acidizing, Choke Manifolds, Extraction, Fracturing and Cementing,Mud Pumps, New Well development, Nitrogen Injection, Service and Cement Trucks, Standpipe, Stimulation and Well head measurement. датчик давления
Specification
| Tested Media | Wet Soil,Oil,Corrosive liquidand gas |
| Pressure type | Gauge pressure(G), Sealed pressure(S), Vent Pressure(V) |
| Full Scale Pressure Range | 0~105MPa,150MPa,200MPa ,300MPa |
| Supply Voltage | 10-32VDC |
| Output Signal | 4-20mA,0-5VDC,1-5VDC,0-10VDC,3mV/V |
| Non-Linearity | 0.04%FS |
| Repeatability | 0.04%FS |
| Combined Accuracy | 0.1%FS,0.2%FS,0.5%FS Alternative |
| Long-Term Stability | 0.1%FS/Year (representative value) |
| Operating Temperature | -43~85ºC/125ºC |
| Compensated Temperature | -25~70ºC/100ºC |
| Response Time | ≤1mSec(representative value) |
| Insulation Resistance | ≥500 MΩ/100V |
| Safety overload pressure | 200%FS(2 Times Full Range, special: 5 Times Full Range) |
| Rupture pressure | 500%FS(5 Times Full Range, special: 10 Times Full Range) |
| Shock Limitation | About 10g/0~2000HZ |
| Impact Resistance | About 50g/1ms |
| Connection | Chuck type seal or specified |
| Wetted Materials | 17-4PH stainless steel |
| Relatvie Humidity | 0~100% RH |
| Degree of Protection | IP67 |
| Electrical Connection | Aviation connector |
Dimensions in mm
Order information
| Model PPM-T293A Pressure Transmitter | ||||||||||
| Code | Pressure type | |||||||||
| G | Gauge pressure | |||||||||
| S | Sealed pressure | |||||||||
| D | Differential pessure | |||||||||
| A | Absolute pressure | |||||||||
| Code | Pressure ranges | |||||||||
| M | 0~ X MPa | |||||||||
| K | 0~ X KPa | |||||||||
| P | 0~ X Pa | |||||||||
| Code | Accuracy | |||||||||
| 1 | ±0.5%FS | |||||||||
| 2 | ±0.25%FS | |||||||||
| 3 | ±0.1%FS | |||||||||
| 4 | 0.075% | |||||||||
| Code | Output signal | |||||||||
| V0 | mV | |||||||||
| A1 | 4~20mA | |||||||||
| V1 | 0~5V DC | |||||||||
| V2 | 1~5V DC | |||||||||
| V3 | 0.5~4.5V DC | |||||||||
| V4 | 0~10V DC | |||||||||
| A0 | Others | |||||||||
| Code | Operation temperature | |||||||||
| T1 | -10~70ºC | |||||||||
| T2 | -25~85ºC | |||||||||
| T3 | -30~125ºC | |||||||||
| T4 | -45~150ºC | |||||||||
| T5 | -10~175ºC | |||||||||
| T0 | Others | |||||||||
| Code | Power supply | |||||||||
| D1 | 5VDC | |||||||||
| D2 | 10VDC | |||||||||
| D3 | 24VDC(9-32)VDC | |||||||||
| D0 | Other | |||||||||
| Code | Process connection | |||||||||
| M1 | M20x1.5 | |||||||||
| M2 | M14 x1.5 | |||||||||
| M3 | M10x1 | |||||||||
| G1 | G1/4 | |||||||||
| G2 | G1/2 | |||||||||
| N1 | 1/4NPT | |||||||||
| N2 | 1/2NPT | |||||||||
| F0 | Other | |||||||||
| Code | Electrical connectiong | |||||||||
| W1 | Cable outlet | |||||||||
| W2 | DIN43650 | |||||||||
| W3 | Circular connector M12 x 1 | |||||||||
| Code | Other | |||||||||
| P1 | Commom | |||||||||
| P2 | Non-cavity diaphragm | |||||||||
Product series
Pressure transmitter датчик давления Temperature transmitter Differential pressure sensor
Our Services
1, MOQ: One sample order is acceptable.
2, Price term : EXW, FOB Changsha.
3, Payment: Western union, Paypal for samples order; T/T 30% deposit, 70% T/T before shipment for order.
4, Packing: Standard export packing, including instructions and certificate.
5, Leading time : 5-10days for samples, 10-30 days for mass production.
6, OEM/ODM is available.
7, Shipment: Express (FedEx, DHL, UPS & TNT) or forwarder.
8, Warranty: One year free repair for quality warranty, and lifetime free online after-service.
Company information
