Audited Supplier
Product Name:Industrial 150W Ceramic Igniter Heater for Pellet Stove
can replace the FKK and Rauschert ceramic igniter
Our ceramic igniters are perfectly suitable for wood pellets, but also for the ignition of wood chips, logs, coal briquettes or other solid fuels (biomass such as corn, etc.) and do not leave you in the cold!
The hot surface igniters are usually offered as a ready-to-install solution that is easy to assemble. The ceramic heater is interchangeably inserted in a temperature-resistant ceramic base and is fixed by clamping springs in the base and electrically contacted.
The ignition takes place via air heating. Due to the special cylindrical geometry the air can flow through and around the heater, on the inside as well as the outside.In combination with an extremely high surface temperature of 1000 ° C, both in continuous and in alternating operation, the supply air is heated to the highest temperatures in the shortest possible time. With this ideal ignition fan very short ignition times are realized, which is associated with minimal emissions.
Due to the manufacturing process, the conducting path is completely embedded in a high-purity alumina ceramic. Thus, the ceramic heater is completely electrically isolated towards the outside and the inside and the electrical contacts are enclosed by the ceramic socket. The glow starter is thus extremely resistant to oxidation and corrosion, extremely durable and resilient. Depending on the operating conditions, the heater has a lifetime of up to more than 100,000 heating cycles.
Another enormous advantage is the insensitivity of the hot surface igniter to overheating, as it can be caused by a fan failure e.g..
Also keep in mind: Here you can buy directly from the manufacturer - without intermediaries!
Product Details
ceramic heating elements for pellet stove consist of AL2O3 insulation ceramics with
an integrated platinum conductor, and reach to a permanent operating temperature
between 750°C and 1100°C Ceramic igniter for pellet stove need only approx. 1/10 of
the energy of thatneededby hot air fans and ignition blowers. Their ignition capacity lies
between 120 and 240 voltage.
Depending on the positioning of the ignition element in the boiler, the ignition time of approx.
60 seconds is extremely short. This also means minimal emissions.
Specifications
* Substrate: White multi-layer alumina ceramics,.-Al2O3
* Lead: In a 0. 8mm of Nickel wire.
* Casing, tape: Teflon, high temperature resistance to high temperature
* Resistance: high temperature materials such as tungsten, etc.
* Product thickness: 0.7 ~ 2.0. Customizable
Main Features
* Small size, light weight and energy-saving
* Superior thermal properties, Rapid heating, Custom-designed temperature distribution, Excellent insulation
* High reliability: Superior voltage resistance and electrical resistance, No electric noise
Application
* Wood pellet burner /Wood chips burner /Straw burner /Other biomass burner;
* 3D prinert
* Industrial drying equipment, electric Bonding liquid heater;
* Medical devices and other precise instrument.
Advantages
(1)Ready to fit solution: High temperature heating element in temperature-resistant
ceramic socket
(2)Air can flow through and around inside and outside of heater
(3)Element temperature: over 1000 °C in permanent and alternating operation, for a short
time up to 1200 °C
(4)Lifetime up to 100,000 heating cycles, depending on operating conditions
(5)Oxidation and corrosion-resistant
(6)Ignition through air heating: Due to extremely high heater temperature and ideal geometric
conditions, air is heated in a very short time to very high temperatures - the ideal ignition
blower!
Mass customization is available. we can open molding according to you your design drawing.
If you are interested in our products, please click here to send me an inquiry, and I will reply you within 8 hours
Our Certificate
ISO 9000; RoHS REACH
Inspection Standard
To ensure the quality of products, the in-process inspection and sampling inspection should be taken which based on the regulation of National GB/T 2828-2003.
Part 1.Sampling inspection of AQL standard.
In-process inspection VS Sampling Inspection
Inspection items | In-process inspection | QC sampling inspection | |
Inspection level | Acceptable quality level (AQL) | ||
Appearance | 100% inspection |
| 1.0 |
Straightness | 100% inspection | S-4 | 1.0 |
Dimension | 100% inspection |
| 1.0 |
Power-on Test | 100% inspection |
| 0.40 |
Dielectric Strength | 100% inspection |
| 0.65 |
About our factory:
our Product Equipment
Related Products
Ceramic igniter for pellet stoveIgnition resistance for pellet stoves, with 3/8'' brass flange
Hermetic/ perforated version.
Diameter: 11.55 mm.
Overall length: 107 mm.
Power: 300 Watt.
Maximum temperature: 1100 ° C
We also have other types like 250w, 150w ceramic igniter and other shape.
Detail Images
Applications
RFQ
1.What's the max using temperature ?
2.Which composition suitable for metallized ceramics?
95%, 96% alumina
3.What's the 99 alumina's major applications?
Pump Shaft,Drive Shaft,Sealing Ring
4.Can you do OEM?
We are mostly doing by drawing
5.What's the delivery time?
About 20days
Our products family photo
