Audited Supplier
ES600 Hydraulic Servo Drive
ES600 series servo drives cover a power range of 3.7kW to 350kW, while the EP series AC permanent magnet servo motors have a rated power of 3.7kW to 350kW, a rated torque range of 2.2Nm to 20000Nm, and a rated speed range of 10rpm to 15000rpm. The hydraulic servo system is mainly used in industries such as injection molding machines, shoe-making machines, large-scale hydraulic stations, hydraulic presses, film blowing machines, metal balers, bending machines, and die-casting machines.
Product Positioning
ES600 series servo drives cover a power range of 3.7kW to 350kW, while the EP series AC permanent magnet servo motors have a rated power of 3.7kW to 350kW, a rated torque range of 2.2Nm to 20000Nm, and a rated speed range of 10rpm to 15000rpm. The hydraulic servo system is mainly used in industries such as injection molding machines, shoe-making machines, large-scale hydraulic stations, hydraulic presses, film blowing machines, metal balers, bending machines, and die-casting machines.
| Item | ES600-T-XXX | |||||||||||||
| 017 | 025 | 032 | 037 | 045 | 060 | 075 | 091 | 112 | 150 | 176 | 210 | 253 | 304 | |
| Power rating (kW) | 7.5 | 11 | 15 | 18.5 | 22 | 30 | 37 | 45 | 55 | 75 | 90 | 110 | 132 | 160 |
| Input voltage | 3AC 380V, -15% ~ +10% | |||||||||||||
| Carrier frequency | 0.8K-16K | |||||||||||||
| Input frequency resolution | Digital setting: 0.01Hz Analog setting: maximum frequency*0.025% | |||||||||||||
| Motor type | Synchronous motor | |||||||||||||
| Control mode | Vector control with speed sensor (FVC) | |||||||||||||
| Speed adjustment range | 1:1000 | |||||||||||||
| Steady speed accuracy | +-0.02% | |||||||||||||
| Speed fluctuation | +-0.5% | |||||||||||||
| Torque control response | Less than 200ms | |||||||||||||
| Overload capacity | 150% 60s | |||||||||||||
| Communication | RS485, CANopen | |||||||||||||
| Running command source | Keypad, terminal, communication | |||||||||||||
| Frequency source | Digital, communication, analog, multi-speed, multi-channels switch, superposition given | |||||||||||||
| Digital input | 5 inputs | |||||||||||||
| Relay output | 3 inputs | |||||||||||||
| Analog input | AI1: 0~10V | |||||||||||||
| Al2: 0~10V | ||||||||||||||
| Al3: 0~10V or 0~20mA | ||||||||||||||
| Analog output | 0~10V | |||||||||||||
| Motor temperature detection | 1 * PTC 130 standard, 1 * KTY84-130 optional | |||||||||||||
| Working Altitude | Below 2000 meters, derating by 10% for every 1000 meters increase | |||||||||||||
| Working environment | Indoors, not exposed to direct sunlight, free from dust, corrosive, flammable gas, oil, water vapor, dripping water, salt, etc.-10ºC ~+ 40ºC (When the ambient temperature is above 40ºC, please derate, and the output current will decrease by 2% for every 1ºC above). Less than 95%RH, no condensation. | |||||||||||||
Working Principle
Before the system establishes pressure, the flow is used to control the speed of the servo motor precisely, thus controlling the system flow accurately.
After the system pressure is established, the real-time pressure is rapidly controlled through pressure PID, utilizing the advantages of fast response and precise control of the servo motor to achieve rapid and high-precision pressure control in the system.
Electrical Parameters
| Model | Rated power (kW) | Rated output current (A) | Rated input current (A) | Recommended braking resistor power (kW) | Min. braking resistor | Input reactor (A) | Inductance (mH) | Input filter (A) | Magnetic ring | Braking unit | Remarks |
| 3AC 380V, 50/60Hz | |||||||||||
| ES600T017 | 7.5 | 17 | 20 | 0.8 | ≥32Ω | 40 | 0.47 | 30 | T63 (input/output, 3AC)*2 T25 (signal cable)*2 | Built-in | Plastic structure |
| ES600T025 | 11 | 25 | 29 | 1.1 | ≥32Ω | 40 | 0.35 | 40 | |||
| ES600T032 | 15 | 32 | 36 | 1.5 | ≥20Ω | 40 | 0.35 | 40 | Sheet metal structure | ||
| ES600T037 | 18.5 | 37 | 42 | 1.85 | ≥20Ω | 50 | 0.28 | 50 | |||
| ES600T045 | 22 | 45 | 48 | 2.2 | ≥20Ω | 50 | 0.28 | 50 | |||
| ES600T060 | 30 | 60 | 62 | 3 | ≥12Ω | 80 | 0.17 | 80 | |||
| ES600T075 | 37 | 75 | 76 | 3.7 | ≥12Ω | 90 | 0.16 | 90 | |||
| ES600T091 | 45 | 91 | 92 | 4.5 | ≥11Ω | 120 | 0.12 | 120 | |||
| ES600T112 | 55 | 112 | 113 | 5.5 | ≥8Ω | 150 | 0.095 | 150 | |||
| ES600T150 | 75 | 150 | 157 | 7.5 | ≥5.5Ω | 200 | 0.07 | 200 | |||
| ES600T175 | 90 | 175 | 180 | 9 | ≥5Ω | 250 | 0.056 | 250 | Optionalbuilt-in | ||
| ES600T210 | 110 | 210 | 214 | 6 | ≥5Ω*2 | 250 | 0.056 | 250 | |||
| ES600T253 | 132 | 253 | 256 | 7 | ≥5Ω*2 | 330 | 0.042 | 330 | |||
| ES600T304 | 160 | 304 | 307 | 8 | ≥5Ω*2 | 330 | 0.042 | 330 | |||
Q1: Can I have a sample order?
A1: Yes, we welcome sample order to test and verify the quality and performance. Mixed model samples are acceptable too.
Q2: Do you have any MOQ limit?
A2: NO MOQ. Please just send us inquiry.
Q3: What is the lead time?
A3: We have some stock for common models. Common model samples take 1-3 days; bulk orders take 3-10 working days. Uncommon models take 20-30 working days and depends on the actual situation of the production line.
Q4: Do you offer warranty for the products?
A4: Yes, we provide 18 months warranty for the failure or damage under normal use conditions. If the equipment has been used for over 18 months, reasonable repair expenses will be charged.
