Audited Supplier
Lightweight Putty
9003-01-4
Yes
618-347-7
Light Yellow Paste
Paste
Polyester Resins
Heat-Resisting Paint
Scratch
Primer
ISO14001, ISO9001
Iron
Film Forming Matter
Conversion Type
1 Years
MLB
OEM Package Could Be Provided
1KG, 2KG, 4KG
China
3210000090
Product Description
1. Product composition
All imported unsaturated polyester resins, original imported pigments, fillers and additives, active solvents, and ultra-light spherical powders are refined by a special production process, and equipped with a special BPO hardener to be used at a ratio of 100:2.
- Product Features
3. Construction Scope
Suitable for a variety of metals (such as bare iron, stainless steel, aluminum, galvanized sheet, etc.), glass fiber reinforced plastic, old paint film, wood, and various two-component primer surfaces.
4.Main technical data sheet
Main putty indicator
| Name | Project | Technical indicators | Test standards |
| Putty component | State Color appearance | No crusting, no lumps, no visible particles Light yellow paste | Visual inspection Visual inspection |
Coating performance index
| Project | Technical indicators | Test standards |
| Putty color and appearance dry condition Dry time h(25ºC) ≤ Thickness cm Gel time (pot life) min ≥ Adhesion MPa ≥ Flexibility mm ≤ Impact strength cm ≥ | Pale yellow, even after scratching No obvious particles, no scratches, no cracks after drying 1 9~12 3 3 50 18 | Visual inspection GB/T1728 GB/T1749 GB/T1728 GB/T5210 GB/T1748 GB/T1732 |
5.Construction reference:
- Mix the putty and hardener at a ratio of 100:1-3 (to make the color consistent), and use it up within the gel time.
- Scrape the adjusted polyester putty on the polished two-component primer or the treated sheet metal surface. If thick coating is required, it is best to scrape it thinly to the required thickness. If there are air bubbles infiltrated when smearing, it must be thoroughly scraped with a scraper to ensure good adhesion.
6.Notes:
- Once the putty is mixed with hardener, it cannot be put into the tank again, and it should be covered immediately after use to avoid the deterioration of the putty caused by the volatilization of the solvent.
- The consistency of the putty and the gel time can be adjusted according to customer requirements.
- his product cannot be used for corrosive paints on metal surfaces, synthetic resins primers, and one-component acrylic primers, and it is not recommended to spray topcoat directly on the surface of this product.
- The effective storage period is eighteen months from the date of production. (After the shelf life is exceeded, it will be confirmed by standard inspection. If it is qualified, it can still be used.)
Q.1: Do you have color software formulas for mixing car paint?
A: Yes, we have. we can offer formulas including CD and on-line.
Q.2:Do you provide samples ? is it free or extra?
A:According to the actual situaton, we can provied free samples.
Q:3:Can you produce the paint with customer's brand?
A:We can do OEM for you with your brands.
Q:4:What kind of certificate do u have?
A:SGS, ISO9001:2008,ISO14001:2004,ISO/TS1694, MSDS, TDS etc.
Q:5:Can you offer free advertising materials to us?
A: Yes, we can offer color chart, posters, mixing ruler, T-shirts, catalogs, tin openers, etc.
Q:6:How long for your delivery time after pay deposit?
A:15-20 days depends on total quantity.
Q:7:Can you do customized colors?
A:Yes, we can, but we need the color sample from buyers. Or maybe you can send a picture for us for reference.
