Audited Supplier
Short Span ADSS Tension Set:Less than 100m span
Medium Span ADSS Tension Set: 200m-400m span
Long Span ADSS Tension Set: longer than 400m span
Material
1.Made from high-quality galvanized steel with a zinc coating
Features
1. Hold up to 95% of the rated breaking strength (RBS) of the guy wire
2. Meets ANSI C119.4 standards for holding strength and durability.
3. Pass ASTM B117 salt spray tests for over 1,000 hours
4. Simple structure and easy installation
5. Uniform stress distribution of fixtures and improved seismic resistance
6. Can replace common wire clamps
1.ADSS/OPGW power optical cable tension clamps are mainly used for connecting ADSS optical cables with tension poles, angle poles, terminal poles, tension towers, angle towers and terminal towers.
2. Main and branch distribution lines for bare overhead conductors and insulated wires
 Installation of Tension Clamp For Intermediate Pole |  Installation of Tension Clamp on ADSS Optical Cable Splicing Pole |  Installation of Tension Clamp on Terminal Pole |
 Installation of Tension Clamp For Intermediate Tower |  Installation of Tension Clamp on ADSS Optical Cable Splicing Tower |  Installation of Tension Clamp on Terminal Tower |
Short Span ADSS Tension Set
The material for Short Span ADSS Tension Set is aluminum-clad steel and galvanized steel wire; it is mainly used for ADSS installation between strain tower/pole, corner tower/pole, mid-joint tower/pole and terminal tower/pole which span length is less than 100m.
Type | Available Dia. of Cable | Reference Span | |
| Min.(mm) | Max.(mm) | ||
| NJA 1050/100 | 9.6 | 10.5 | Less than 100m span |
| NJA 1150/100 | 10.6 | 11.5 | Less than 100m span |
| NJA 1250/100 | 11.6 | 12.5 | Less than 100m span |
| NJA 1350/100 | 12.6 | 13.5 | Less than 100m span |
| NJA 1450/100 | 13.6 | 14.5 | Less than 100m span |
• The symbols of 'NJA' are: N-tension set, J-helical rods, A-apply to ADSS cable.
• The products are beyond the schedule, if need more please contact our company freely.
Medium/Long Span ADSS Tension Set
Medium/Long Span ADSS Tension Set is composed of Dead-end component and structural reinforcing rods, the materials are aluminum-clad steel and galvanized steel wire, it is mainly used for ADSS installation between strain tower/pole, corner tower/pole and terminal tower/pole which span length is larger than 200m with RTS of the cable is larger than 15kN. Medium Span ADSS Tension set is used for installation span length between 200m-400m, Long Span ADSS Tension set is used for installation span length longer than 400m.
Type | Available Dia. of Cable | Reference Span(m) | |
| Min.(mm) | Max.(mm) | ||
| NJA 950/200 | 8.6 | 9.5 | 100-200 |
| NJA 1050/200 | 9.6 | 10.5 | 100-200 |
| NJA 1150/200 | 10.6 | 11.5 | 100-200 |
| NJA 1250/200 | 11.6 | 12.5 | 100-200 |
| NJA 1350/200 | 12.6 | 13.5 | 100-200 |
| NJA 1450/200 | 13.6 | 14.5 | 100-200 |
| NJA 1050/300 | 9.6 | 10.5 | 200-300 |
| NJA 1150/300 | 10.6 | 11.5 | 200-300 |
| NJA 1250/300 | 11.6 | 12.5 | 200-300 |
| NJA 1350/300 | 12.6 | 13.5 | 200-300 |
| NJA 1450/300 | 13.6 | 14.5 | 200-300 |
| NJA 1150/400 | 10.6 | 11.5 | 300-400 |
| NJA 1250/400 | 11.6 | 12.5 | 300-400 |
| NJA 1350/400 | 12.6 | 13.5 | 300-400 |
| NJA 1450/400 | 13.6 | 14.5 | 300-400 |
| NJA 1550/400 | 14.6 | 15.5 | 300-400 |
| NJA 1650/400 | 15.6 | 16.5 | 300-400 |
| NJA 1250/500 | 11.6 | 12.5 | 400-500 |
| NJA 1350/500 | 12.6 | 13.5 | 400-500 |
| NJA 1450/500 | 13.6 | 14.5 | 400-500 |
| NJA 1550/500 | 14.6 | 15.5 | 400-500 |
| NJA 1650/500 | 15.6 | 16.5 | 400-500 |
| NJA 1350/600 | 12.6 | 13.5 | 500-600 |
| NJA 1450/600 | 13.6 | 14.5 | 500-600 |
| NJA 1550/600 | 14.6 | 15.5 | 500-600 |
| NJA 1650/600 | 15.6 | 16.5 | 500-600 |
| NJA 1750/600 | 16.6 | 17.5 | 500-600 |
| NJA 1350/700 | 12.6 | 13.5 | 600-800 |
| NJA 1450/700 | 13.6 | 14.5 | 600-800 |
| NJA 1550/700 | 14.6 | 15.5 | 600-800 |
| NJA 1650/700 | 15.6 | 16.5 | 600-800 |
| NJA 1750/700 | 16.6 | 17.5 | 600-800 |
| NJA 1550/800 | 14.6 | 15.5 | 800-1000 |
| NJA 1650/800 | 15.6 | 16.5 | 800-1000 |
| NJA 1750/800 | 16.6 | 17.5 | 800-1000 |
| NJA 1850/800 | 17.6 | 18.5 | 800-1000 |
| NJA 1550/1000 | 14.6 | 15.5 | 1000 |
| NJA 1650/1000 | 15.6 | 16.5 | 1000 |
| NJA 1750/1000 | 16.6 | 17.5 | 1000 |
| NJA 1850/1000 | 17.6 | 18.5 | 1000 |
• The symbols of'NJA'are: N-tension set, J-helical rods, A-apply to ADSS cable
• The products are beyond the schedule, if need more please contact our company freely.
• Remarks: to insure the installation safety,during the line design and operation, when span length is larger than 1000m, or under condition which the capacity of electrical power line is heavy, please do contact with our company, we will provide special design or consultation service in accordance with specific circumstances of the electrical power line.
 |  |  |
Our Service:
1.Customers solutions in days, not weeks.
2.Warmly services with careful attentions.
3.We can provide production videos and corresponding test reports.
4.Save much costs, bring more benefit for customer to expand business.
5.We have been 10 years experience in this field. We are the prefessional supplier that you can trust.
6.we know china market very well ,so weO can communicate to help you find the products you needed!
7.We acknowledge customer's stringent quality demands for optical fiber products and pledge to supply products meeting international standards.
FAQ:
Q1:How can you guarantee the delivery time?
A:1. To avoid the delay, we have built a complete and professional procedure system from production to the deliver and have rich experience.
2. We can regulate the penalty clause in the contract for the late delay.
Q2:What's your best price?
A:Based on the quality of our products and the quantity of your estimated. We would quote the great best matching price all the time.
Q3:What's your BRAND?
A:FIBERCLOUD,YOFC,CORNING,OFS...
Q4:Can I print our own logo on the product?
A:Yes, Please send your logo to us.
Q5:Can you provide OEM/ODM service?
A:Yes, we can. Please tell us the details of your requirements
Q6: How to deal with the faulty?
A: First of all, our products are produced under a strict quality control system, and the defective rate will be less than 0.2%.
Secondly, we will conduct strict quality inspections and issue test reports before shipment to ensure the quality of the products.
Q7:Why choose us to cooperate?
1. We have first-class production line and strict quality management system.
2. We have professional procedure system and big production capacity to guarantee fast deliver and on time shipment.
3. We can provide the most competitive price to meet your budget.
4. We also design and innovate the new products based on our rich experience .
5. We have professional team to provide comprehensive one-stop service for you.
Hope this would be a good start for our cooperation!
