Audited Supplier
433 Mhz Wireless Remote Control Switch DC 12V 10A 1CH relay 433Mhz Receiver Module For 1527 learning code Transmitter Remote
Input Voltage: DC12V,
RF working mode: Superheterodyne
• Receiver sensitivity: > 97 dbm
• Transmitting distance:50-100 m ( open space)
• Decoding mode: MCU software decoding
• Remote storage: 20
• Support remote type: EV1527 learning code
• Working mode: Momentary, toggle, latching time delay (5s ,10s ,15s )
• Output terminal: NO , NC , COM
• Dimension of PCB:35 x 30 x 18 mm (L,W,H)
• Remote control battery: 12V 27A
Note: Maximum input power is 250 V
Remote programming
-Clearing the code :
Push the learning button on the receiver 8 times , the codes will be reset.
After clearing the code, remotes will be need to be recalibrated
-Operation Introduction:
About Working Mode:
Learning The Code: (Momentary)
Push the learning key on the receiver once, initiate momentary mode learning.
Just wait for the LED switches on.
Push the remote button, LED indicator on the receiver board will flash and switch off.
After 3 seconds, learning successfully.
Learning The Code: (Toggle)
Push the learning key on the receiver twice, initiate toggle mode learning.
Just wait for the LED switches on.
Push the remote button, LED indicator on the receiver board will flash and switch off.
After 3 seconds, learning successfully.
Learning The Code: (Latching)
Note: for latching mode, in order to learn more remote controls, you will need two different buttons, first button for "ON", second button for "OFF".
For example: button A = ON, button B = OFF.
Push the learning key on the receiver 3 times, initiate latching mode learning.
Just wait for the LED indicator on the receiver board flashes and switches on.
Push the remote button A. LED flashes 5 times.
Push the remote button B.Led flashes 5 times.
After 3 seconds, the LED indicator switches off again, learning successfully.
A = ON , B = OFF.
Learning The Code: (Time delay mode)Using the description below to set up the following mode.
Push the learning key on the receiver 4 times, set up for 5 seconds delay.
Push the learning key on the receiver 5 times, set up for 10 seconds delay.
Push the learning key on the receiver 6 times, set up for 15 seconds delay.
The LED indicator switches on.
Push the remote button, LED flashes and switch off.
After 3 seconds, learning successfully.
Receiver Code Resetting/Clearing:
Press learning key on the receiver 8 times, LED indicator on the receiver flashes and switches off. Note that after resetting the receiver, all the paired remote controls will have to be re-paired in order to control the receiver again.
NOTES:
1. Please do not charged operation, you should shut off the power, and operation after testing and correct electricity.
2. Please promptly change battery when remote control voltage is insufficient (when the battery voltage is insufficient, generally get close transmitting).
3. Please pay attention to avoid metal mask,large equipment,strong interference electromagnetic filed when using wireless RF products, and avoid too short distance between the remote control and receiver board.
4. Please avoid abnormal using of the product.Abnormal using will reduce product performance and life, when seriously it may damage the products and even make danger for your safe.
Package including
1*Receiver module
1*Remote Control (with battery)
Runking Technology Co.,Ltd.is a professional supplier of universal remote controller with full experience. Our products includes garage door rf remote controls,remote control duplicator & receiver kits etc. Our company integrates development, design, production, sales, and after-sale service in one, supplying the customers with cordial and thorough service.
Our principle is customers and quality come ever first.
We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
1. What's your minimum order? Can I buy samples for testing?
The Minimum order quantity is 100 pcs in our factory. Samples are ok.
2. What time can you deliver my order?
Samples in 5-7days, bulk order in 20-25Days after payment.
3. Do you have gurantee for my order?
Battery gurantee for 6 months, remote control and receiver gurantee for 1 year ( except man-made sabotage)
4. What's your best price?
We make different models and different chip, please advise detailed parameters for goods that you need.
