WD5637 Modified Acrylate; Combines The Functions of UV Resin and Diluent, and Is Used in Coatings for Bamboo and Woodware, Paper Varnish, etc.

Price $5.07 Compare
Min Order 200 kg
Shipping From Guangdong, China
Popularity 297 people viewed
Quantity
+-
 

Dongguan Qinggang New Material Technology Co., Ltd

VIP   Audited Supplier 2 years
Profile Certified by SGS/BV
WD5637
Carbon Chain Polymer
Slightly Yellow Transparent Liquid
Two
600~1500MPa.S(25°c)
100%
High Cross-Linking Density, High Hardness,
50000 Tons
Support
Support
Bamboo and Wood Coatings, PVC Board Coatings, Pape
according to requirements
Metal Drum
20kg/drum; 200kg/drum
Guangdong, China
3902900090
Product Description

Product Parameters

 
WD5637It is a modified acrylic ester that combines the functions of UV resin and diluent,
functionalitytwo
Solid Content100%
Viscosity   600~1500mpa.s(25ºC)
Appearance(25ºC)Slightly yellow transparent liquid
chromatic number≤2#.Fe Co colorimetric method
characteristicFast curing speed, high cross-linking density, high hardness, and low viscosity.
use toBamboo and wood coatings, PVC board coatings, paper varnish, UV silk printing varnish
package20KG net weight iron bucket and 200KG net weight iron bucket.
storageThe resin should be stored in a properly sealed container protected from light at 0-35ºC; Under this condition,the storage stability of this product should be at least 6 months;
secure      Irritating to eyes and skin: Skin contact may cause allergies: You should carefully read the Safety Data Sheet(MSDS):including relevant information on labeling,transportation, and storage Information, as well as relevant information on product use,product safety,and ecology.
pay attention toPlease wear protective gloves during operation to avoid contact with the skin; In case of accidental contact with skin and eyes Or clothing,please wash with soap and water(rinse eyes with plenty of water). For detailed instructions, please refer to Read the Material Safety Data Sheet

The data provided by this product is accurate and is used in conjunction with other company materials during use, and is not subject to our supervision. Therefore, our company does not assume any legal responsibility for the recommended products. Please test its adaptability in advance.


 

Detailed Photos

 

Packaging & Shipping

 

Company Profile

Factory/Production Base




Experimental/Office Area




 

Certifications



 

FAQ


A.  Are we a factory or a trading company?

b.    It is a factory. Our company was founded in 2015, covering an area of 38000 square meters and equipped with advanced automated production equipment. The annual production capacity of synthetic resin is 50000 tons

A.  Is the test sample free of charge?
b.    The samples are free, you only need to pay for shipping

A. What is the minimum order quantity?
b.    Minimum order quantity: 200 kilograms, preferably 1 ton (1 ton is cheaper)
       Note: The minimum quantity of orders depends on different types of materials. Please contact us.

A.  Can we accept OEM of the product?
b.    Yes, we can package according to your requirements, and both the packaging and labeling can be made for your brand.

A.  What is the delivery cycle?
b.    Delivery cycle - peak season: one month.    Delivery cycle - off-season: within 15 workdays
       Note (The specific delivery time is determined by the ordered product and quantity)
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA