Audited Supplier
ZZ170306
6 Months
6 Months
New
CE, ISO9001
DIN, GB, BS
Customized
Metal
Metal Recycling Machine, Metal Cutting Machine, Metal Straightening Machinery, Metal Spinning Machinery, Metal Processing Machinery Parts, Metal forging Machinery, Metal Engraving Machinery, Metal Drawing Machinery, Metal Coating Machinery, Metal Casting Machinery
Any Size Accepted Customized
Yg6, Yg8, Yn8, Yn10, Yg15
Polished or Unground
15days
Mining
+/-0.05
Cemented Carbide
100% G Virgin Materials.
DHL, FedEx, TNT, UPS, EMS
10 Kg
Old Craftsman
Carton
Customized
Hunan
82090090
Product Description
Description of our wear liner:
The research and development of our wear-resistant liners is based on the use of pure carbide and steel materials, It is made of tungsten cemented carbide through the vacuum brazing process. The tungsten carbide used in chute plates is characterized by its high hardness, strength, and wear resistance. It has a longer service life than the traditional wear-resistant plate.
Our Wear Liner is easy to install and maintain and can be customized to fit your equipment perfectly. This ensures that your equipment is protected from damage and wear, extending its service life and reducing downtime.
| Grade | Equivalent to ISO | Hardness (HRA) ≥ | Bending strength (N/mm2) ≥ | Density (g/cm3) ≥ |
| YG8N | K20 K30 | 90.5 | 1880 | 14.5-14.9 |
| YS2T | M30 K30 | 91.8 | 3600 | 14.3-14.6 |
| YL10.2 | - | 91.2 - 91.8 | 3600 | 14.4-14.6 |
| YG6 | K20 | 89.8 | 1700 | 14.7-15.1 |
| YG8 | K30 | 89.5 | 1890 | 14.6-14.9 |
| YG15 | - | 87.3 | 2250 | 13.9-14.20 |
You can directly select the grade or tell us your actual use, and then we can discuss and determine which grade is best for you.
Remark: Customed grade will be welcomed
| Material compare |  |  |  |
| Material | Rubber | ceramic | Tungsten carbide |
| Advantages | 1. It has good elasticity and can absorb shock and vibration. 2. Good processing properties, can be processed into various shapes. | 1. High hardness and wear resistance. 2. Good corrosion resistance, able to cope with highly corrosive environments. 3. Electrical insulator. | 1. High hardness, high strength, and high wear resistance. 2. Longer product life 3. Resistance to high temperature, low temperature, and high impact situations. 4. Coated surface to prevent corrosion. |
| Disadvantages | 1. Will soften at high temperatures, and reduce its wear resistance. 2. Easy to age and affect performance. 3. Difficult to high wear situations, bad at durability. 4. The temperature range is narrow and the application range is not wide. | 1. Fragility. Easily broken when subjected to impact or vibration 2. Hard to process, high technical requirements. | 1. High unit cost. 2. Hard to reprocess, the service quality of suppliers is very important. |
Select the product that best meets your production requirements
Features of the wear liner:
About material: Tungsten cemented carbide is our choice
1. High hardness: The hardness of the carbide wear liner is as high as 1600-2000HRA, which is about 10 times that of ordinary steel, so it has good wear resistance.
2. High toughness: The carbide wear liner has good toughness is not prone to fracture or damage when impacted or extruded, and can withstand large loads.
3. Good corrosion resistance: The surface of the carbide wear liner is coated to prevent corrosion.
4. Good processability: Carbide wear liners have good processability and can be customized according to the shape of the equipment.
1. High hardness: The hardness of the carbide wear liner is as high as 1600-2000HRA, which is about 10 times that of ordinary steel, so it has good wear resistance.
2. High toughness: The carbide wear liner has good toughness is not prone to fracture or damage when impacted or extruded, and can withstand large loads.
3. Good corrosion resistance: The surface of the carbide wear liner is coated to prevent corrosion.
4. Good processability: Carbide wear liners have good processability and can be customized according to the shape of the equipment.
About the technology: Vacuum brazing is our major breakthrough
1. High brazing strength: Vacuum brazing can maintain a stable heating temperature. Relying on the wetting and capillary action of the solder, the joint gap produced by the weldment is small, resulting in stronger brazing strength, which can exceed 200Mpa.
2. Low heat-affected zone: During the vacuum brazing process, due to no oxygen and impurities, the heat conduction effect is small and the workpiece is less heated, thereby reducing the heat-affected zone, reducing thermal deformation and stress of the workpiece, helping to maintain the workpiece Original properties and shape.
3. Neat welds: There is no oxygen and impurities in the vacuum brazing process, and defects such as bubbles and inclusions will not occur. The welds are usually tidy and have high appearance quality and welding strength.
4. Eco-friendly: There is no waste gas emission during the vacuum brazing process, causing little environmental pollution. There is no need to use harmful welding flux or coating, and it meets ecological requirements. In addition, vacuum brazing has no open flames or smoke, and the operation risk is low.
Application:
1. Carbide wear plates are used for mineral processing and transportation via mechanical or conveyor systems, such as typically fixed or mobile plant equipment consisting of chutes, feed bins, fan boxes, crushers, screen plates, fan blades, cyclones, and pipe spools.
2. Small pieces of carbide plate applications are in high demand in several industries, including:
The inlet and outlet of the grinding machine and the screen of the screening machine;
The crushing tooth plate, hammerhead, gravel chamber, impact plate, and other parts of the crusher are susceptible to wear;
The mixing blades, flaps, inner cylinder, and other parts of the mixing equipment are susceptible to wear;
Conveyor troughs, pipes, elbows, turntables, and other parts of conveying equipment that are susceptible to wear;
Gate, molds, and other parts of casting equipment that are susceptible to wear.
You may ask: How did it install?
Our products have brazed studs on the back panel, and liners can be easily installed directly onto the chute.Like this picture:
1. Full experience in the brazing. We have done thousands of carbide brazing experiments over the past 8 years, obtaining mature experience.
2. Comprehensive quality control. We inspect the quality throughout the whole production line.
3. Fast delivery. We have experienced workers and advanced equipment to ensure the delivery.
4. Excellent after-sales service, We keep in touch with our customers to earn their satisfaction.
