Audited Supplier
There Are Two Common Materials For Milling Cutters: High-Speed Steel And Cemented Carbide. Compared With The Former, The Latter Has High Hardness And Strong Cutting Force, Which Can Increase The Speed And Feed Rate, Improve Productivity, Make The Knife Less Obvious, And Process Difficult-To-Machine Materials Such As Stainless Steel/Titanium Alloy, But The Cost Is Higher, And The Cutting Force Changes Rapidly. In The Case Of Easy To Break The Knife.
When Working, The Feed Movement Cannot Be Made Along The Axial Direction Of The Milling Cutter. When Working, The Cutting Is Performed In The Horizontal Direction, And Only Objects On The Same Plane Can Be Cut. This Is Where The Flat Milling Cutter Gets Its Name.
Flat
Features
- Nano CVD Coating: DLC & TiAlN (Titanium Aluminum Nitride) Coating Lubricates The End Mill, To Stabilize Processing Performance In High Temperatures, And Endows Mills With Strong Bonding And High Wear Resistance.
-Material: Cutter Is Made Of Tungsten Steel Micro Grain, Offers High Cutting Performance, And Increases The Wear Resistance Of The Cutter. Suitable For Stainless Steel, Die Steel, Tool Steel, Cast Iron Parts
- Feature: Multi-Layer Nano Coating, Easy Working On Heat-Treated Materials Below HRC55°-HRC58° From Rough Machining To Fine Machining. HRC65 Hardness End Mills, 35° Fine Grinding Spiral Groove, 4Flutes * 2 Cutting Edges, Make Chip Evacuation Out More Smoothly.
- Advantage: Adopting A Suitable Negative Rake Angle Design, Taking Into Account The Strength And Sharpness Of The Cutting Edge. The Use Of A Large Core Diameter Increases The Rigidity Of The Mills And Makes Them Stable When Working.
Anti-High Temperature And Wear Resistance, High Precision, Improve Processing Efficiency Of Machine Tool, Good Shockproof
Suitable For Hardness Under 55°Metal Steel, Carbon Steel, Alloy Steel, Cast Iron, Stainless Steel, And Other Materials.
-Round Handle, Chamfering, Easy To Use, Performance Stability.
-Tough And Wear Resistant.
-High Strength And Hardness.
-Durable In Use.
-Using New Ultra-Fine Fine Tungsten Steel Bar Grinding, High Rigidity, And Toughness.
-35 °Helix Angle + Double Edge Belt Design Makes The Milling Cutter
-More Wear-Resistant And Reduces Workpiece Burr During Machining.
-The Chamfer Layout Of The Handle Is Easier To Clamp, And The Quality Of Laser Marking Is Guaranteed.
-Blue Nano Series (Two Edge)
-Sharp And Wear-Resistant.
Application:
1, Used For Half Finishing, Plain Flank, Groove, and Slope Can Be Processed. Suitable For Milling Cooper, Cast Iron, Carbon Steel, Mold Steel,
2, Used In Milling Machine., CNC, Drill Press, and Engraving Machine. Metal, Carbon Steel, Mold Steel, Etc.Woodworking, Alloy Steel, Stainless Steel, Etc. High Rigidity, Widely Used In Shallow Slot, Profile Milling, And Finish Machining.
Specification
| Specification | Diameter D1 | Blade length L1 | Shank diameter D2 | Overall length L2 |
| D3*9*50L | 3 | 9 | / | 50 |
| D3*12*75L | 3 | 12 | / | 75 |
| D3*15*100L | 3 | 15 | / | 100 |
| Dl*3*D4*50L | 1 | 3 | 4 | 50 |
| D1.5*4.5*D4*50L | 1.5 | 4.5 | 4 | 50 |
| D2*6*D4*50L | 2 | 6 | 4 | 50 |
| D2.5*7.5*D4*50L | 2.5 | 7.5 | 4 | 50 |
| D3*9*D4*50L | 3 | 9 | 4 | 50 |
| D3.5*10*D4*50L | 3.5 | 10 | 4 | 50 |
| D4*10*50L | 4 | 10 | / | 50 |
| D4*16*75L | 4 | 16 | / | 75 |
| D4*20*100L | 4 | 20 | / | 100 |
| D5*13*50L | 5 | 13 | / | 50 |
| D5*20*75L | 5 | 20 | / | 75 |
| D5*25*100L | 5 | 20 | / | 100 |
| D5*13*D6*50L | 5 | 13 | 6 | 50 |
| D6*15*50L | 6 | 15 | / | 50 |
| D6*24*75L | 6 | 24 | / | 75 |
| D6*30*100L | 6 | 30 | / | 100 |
| D8*20*60L | 8 | 20 | / | 60 |
| D8*30*75L | 8 | 30 | / | 75 |
| D8*35*100L | 8 | 35 | / | 100 |
| D10*25*75L | 10 | 35 | / | 75 |
| D10*40*100L | 10 | 10 | / | 100 |
| D12*30*75L | 12 | 30 | / | 75 |
| D12*45*100L | 12 | 45 | / | 100 |
| D14*45*100L | 14 | 45 | / | 100 |
| D16*45*100L | 16 | 45 | / | 100 |
| D18*45*100L | 18 | 45 | / | 100 |
| D20*45*100L | 20 | 45 | / | 100 |
| D6*45*150L | 6 | 45 | / | 150 |
| D8*50*150L | 8 | 50 | / | 150 |
| D10*60*150L | 10 | 60 | / | 150 |
| D10*60*151L | 10 | 60 | / | 151 |
| D14*70*150L | 14 | 70 | / | 150 |
| D16*75*150L | 16 | 75 | / | 150 |
| D18*75*150L | 18 | 75 | / | 150 |
| D20*75*150L | 20 | 75 | / | 150 |
1) When can I get the price?
We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority.
2) How long can I expect to get the sample?
After you pay the sample charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3-5 workdays. You can use your own express account or prepay us if you do not have an account.
3) Are you a trading company or manufacturer?
We are a professional manufacturer. We not only own our tools factory but also have cemented carbide factory.
4) How long can I expect to get the sample?
After you pay the sample charge and send us confirmed files, the samples will be ready for delivery in 7-15 days. The samples will be sent to you via express and arrive in 3-5 workdays. You can use your own express account or prepay us if you do not have an account.
5) How about your stock?
We have large quantity products in stock, regular types and sizes are all in stock.
6) Is free shipping possible?
We don't offer a free shipping service. We can have a discount if you buy a large number of products.
