Audited Supplier
If you are just machining Stainless Steel then this is a great option for you. The special TiALN coating helps offer excellent wear and heat resistance when machining tricky materials like 303, 304, and 316 stainless.
We offer a 4 flute option for slotting and general end milling applications and a 5 flute endmill for high feed profiling and fine finishing applications.
When machining Stainless steel and Exotic materials, the key is to 'get in and get out. If you hang about too much you will risk working hardening your material, leading to premature tool failure. Modern Stainless and HRSA cutters feature special geometries such as corner edge preparation and multiple and variable helix with un-even flute spacings. Combined, these features lead to the best tool life and unbeatable performance.
I would also recommend improving your tool holding to complement these high-performing cutters. By this, I mean moving away from standard collet holders and progressing up to a high-performance hydraulic holder. This way you will get the most out of your tooling, see improvements in surface finish and slash your cycle times.
When selecting the best cutter for your material, we also have to consider your machine and whether it has enough grunt to push these tools. We have tooling for all machine types - whether it's a manual or a very lightweight CNC, right up to a powerful machining center.
Features
"variable-lead" shape, providing highly efficient milling!
Special flute and helix angle design for deeply depth milling and removing chips more smoothly.
Special multilayer coating for milling all types 304 and 4 digit number stainless workpieces.
This leads to high-efficiency milling with low vibration, and unequal Helical Structure improves the vibration resistance and significantly avoids the risks of premature chipping
Matters Needing Attention
- Please select a high-precision machine and tool holder.
- Please use air blow or cutting liquid with high mist retardant properties.
- Down milling is recommended in the case of side milling.
- When the machine rigidity and workpiece fixture stability are low, vibration and abnormal noise may be generated.
- Please reduce the rotating speed and feed speed stated above correspondingly.
- Make the overhang of the tool as short as possible in conditions of non-interference.
Specification
| Specification | Diameter D1 | Blade length L1 | Shank diameter D2 | Overall length L2 |
| D3*9*50L | 3 | 9 | / | 50 |
| D3*12*75L | 3 | 12 | / | 75 |
| D3*15*100L | 3 | 15 | / | 100 |
| Dl*3*D4*50L | 1 | 3 | 4 | 50 |
| D1.5*4.5*D4*50L | 1.5 | 4.5 | 4 | 50 |
| D2*6*D4*50L | 2 | 6 | 4 | 50 |
| D2.5*7.5*D4*50L | 2.5 | 7.5 | 4 | 50 |
| D3*9*D4*50L | 3 | 9 | 4 | 50 |
| D3.5*10*D4*50L | 3.5 | 10 | 4 | 50 |
| D4*10*50L | 4 | 10 | / | 50 |
| D4*16*75L | 4 | 16 | / | 75 |
| D4*20*100L | 4 | 20 | / | 100 |
| D5*13*50L | 5 | 13 | / | 50 |
| D5*20*75L | 5 | 20 | / | 75 |
| D5*25*100L | 5 | 20 | / | 100 |
| D5*13*D6*50L | 5 | 13 | 6 | 50 |
| D6*15*50L | 6 | 15 | / | 50 |
| D6*24*75L | 6 | 24 | / | 75 |
| D6*30*100L | 6 | 30 | / | 100 |
| D8*20*60L | 8 | 20 | / | 60 |
| D8*30*75L | 8 | 30 | / | 75 |
| D8*35*100L | 8 | 35 | / | 100 |
| D10*25*75L | 10 | 35 | / | 75 |
| D10*40*100L | 10 | 10 | / | 100 |
| D12*30*75L | 12 | 30 | / | 75 |
| D12*45*100L | 12 | 45 | / | 100 |
| D14*45*100L | 14 | 45 | / | 100 |
| D16*45*100L | 16 | 45 | / | 100 |
| D18*45*100L | 18 | 45 | / | 100 |
| D20*45*100L | 20 | 45 | / | 100 |
| D6*45*150L | 6 | 45 | / | 150 |
| D8*50*150L | 8 | 50 | / | 150 |
| D10*60*150L | 10 | 60 | / | 150 |
| D10*60*151L | 10 | 60 | / | 151 |
| D14*70*150L | 14 | 70 | / | 150 |
| D16*75*150L | 16 | 75 | / | 150 |
| D18*75*150L | 18 | 75 | / | 150 |
| D20*75*150L | 20 | 75 | / | 150 |
1) When can I get the price?
We usually quote within 12 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority.
2) How long can I expect to get the sample?
After you pay the sample charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3-5 workdays. You can use your own express account or prepay us if you do not have an account.
3) Are you a trading company or manufacturer?
We are a professional manufacturer. We not only own our tools factory but also have cemented carbide factory.
4) How long can I expect to get the sample?
After you pay the sample charge and send us confirmed files, the samples will be ready for delivery in 7-15 days. The samples will be sent to you via express and arrive in 3-5 workdays. You can use your own express account or prepay us if you do not have an account.
5) How about your stock?
We have large quantity products in stock, regular types and sizes are all in stock.
6) Is free shipping possible?
We don't offer a free shipping service. We can have a discount if you buy a large number of products.
