Audited Supplier
LT091
Stainless Steel Coils
ASTM, AISI, GB, JIS, DIN, EN
300 Series
ISO, RoHS
Foil
Cold Rolled
Bright
0.05-3mm
Y, Y2, M, TM
20-600cm
430 410 420 SUS304 304L 202 321 316 316L 201 304
722020
SLXCL
Standard Seaworthy Export Packing
customized
China
721260000
Product Description
High precision super thin metal electronic materials, which are primarily used in the 3C industry, including computer hard disk components, printer parts, disk drive parts, TFT-LCD frames, monitor parts, screen frames, mobile handset springs. Furthermore, such foils are widely used in automobile gaskets, engine components, home appliance parts, foil wraps for optical fiber cables, mini laser system parts, medical tubes, etc.
SLXCL can manufacture high quality stainless steel strips as thin as 0.02 - 3 mm with widths from 20 - 600 mm. The annual capacity exceeds 10,000 tons.
Used in electronic appliances, communications, automobiles, medical, aerospace, textile and other industries. And they are widely used in the production of electronic components, mobile phone parts, computer hard disks and connectors, button batteries, injection needles, optical fiber cables, textile steel Reed, piston ring, cylinder gasket, fine welded pipe and other fields.
Uniform chemical composition High resistivity Long service life
SLXCL can manufacture high quality stainless steel strips as thin as 0.02 - 3 mm with widths from 20 - 600 mm. The annual capacity exceeds 10,000 tons.
Used in electronic appliances, communications, automobiles, medical, aerospace, textile and other industries. And they are widely used in the production of electronic components, mobile phone parts, computer hard disks and connectors, button batteries, injection needles, optical fiber cables, textile steel Reed, piston ring, cylinder gasket, fine welded pipe and other fields.
Uniform chemical composition High resistivity Long service life
| Thickness | 0.01-3.00mm |
| Width | 20-600mm |
| Length | according to customer's request |
| Tolerance range | 0.1-3.0MM tolerance minus 0.01-0.02mm Below 0.1mm is minus 0.001-0.002mm. |
Hardness | HV>=110-580 (soft, 1/2H, 3/4H, H, EH, SH) |
| MOQ | 1 tons |
| Material standard | GB(,JIS),ASTM,AISI,DIN and so on |
| Feature | Small tolerance and high precision, no trachoma, fine and smooth surface, no peeling, roll marks and other phenomena, to ensure that the straightness will not appear "chain knife bending" phenomenon. Excellent mechanical properties, high fatigue resistance, good toughness, both sides after trimming treatment edge smooth. |
| Quality Assurance | Meet the mechanical performance requirements and chemical composition proposed by users, meet the relevant national implementation standards, provide objective and true material certificates and SGS test reports. |
| Application | Spring, electronic appliances, precision instruments, metal stamping parts, spring shrapnel, gasket, precision parts, computer mobile phone accessories, bellows, seals, etched parts, auto parts, medical equipment, optical care, chemical (corrosion prevention) and automotive electronics and other high-precision products; Cement resistance, sealing machine, diamond,electronic industry and all kinds of ignition and heating electrode and motor voltage regulator; Grounding resistance cabinet for central point of power system; Temperature detection, drilling oil field brake resistor; Locomotive starting and brake resistor; Automobile and motorcycle exhaust purification metal honeycomb carrier |
| Price Description | Because the product price fluctuates with the market, if you need to order, please contact customer service to inquire about the new price |
| Package | Water proof paper is inner packing,galvanized steel or coated steel sheet is outer packing , side guard plate,then wrapped by seven steel belt.or according to customer's requirement |
| Delievry Time | *Stock materials:3-5 days; *Need to strip, processing materials, 5-10 days; *Non-standard specifications, 15-30 days |
Surface
| Surface Finish | Defination | Application |
| 2B | Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. | Medical equipment, Food industry.Construction material, Kitchen utensils. |
| BA | Those processed with bright heat treatment after cold rolling. | Kitchen utensils, Electric equipment, Building construction. |
| No.1 | The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. | Chemical tank, pipe. |
| HL | Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. | Building construction. |
| 8K | The product have excellent brightness and prefect reflexivity can be the mirror. | Mirror. |
Process Flow Diagram
Product Series
| Copper series | Brass series |
| C1100+IF+C1100 | C2680+IF+C2680 |
| C1100+304/201+C1100 | C2200+F18/F11+C2200 |
1.Layers thickness:the total thickness is 0.05-3.1mm;accounts for 2% to 80% of the total thickness; can be composite with different cladding layer thickness on bothe sides.
2.Quality standards:conforms to be the national standards GB13238-91 "copper-clad steel plate"and WJ 643-2016 "specification for copper-clad steel sheet of cartridge".
3.Delivery:coil maximum outer diameter Φ2000 plate:the length can be customized.
Copper Designation of Different Nations
| China | International | America | Japan | Britain | Germany |
| TU0 | - | C10100 | C1011 | - | - |
| TU1 | - | C10200 | C1020 | - | OF-Cu |
| TU3 | - | C10200 | C1020 | - | OF-Cu |
| T1 | - | C10200 | C1020 | - | OF-Cu |
| T2 | - | C11000 | C1100 | - | SE-Cu |
| T3 | - | - | C1221 | - | - |
| TP1 | - | C12000 | C1201 | - | SW-Cu |
| TP2 | - | C12000 | C1220 | - | SF-Cu |
| H62 | CuZn38 | C27400 | C2740 | - | CuZn40 |
| H65 | CuZn35 | C26800 | C2680 | C2107 | CuZn36 |
| H68 | CuZn32 | C26000 | C2600 | - | CuZn33 |
| H70 | CuZn30 | C26000 | C2600 | C2106 | CuZn30 |
| H80 | CuZn20 | C24000 | C2400 | C2103 | CuZn20 |
| H85 | CuZn15 | C23000 | C2300 | C2102 | CuZn15 |
| H90 | CuZn10 | C22000 | C2200 | C2101 | CuZn10 |
| H96 | CuZn4 | C21000 | C2100 | C2125 | CuZn5 |
Products Details
Products Parameter
Products Applications
Company Profile
Packaging
Q:Can i get some sample before the order ?
A:Of course, we can provide you with free sample,but the freight should be paid by customers themselves.
Q:What is the copper clad steel sheet?
A:Copper clad steel sheet is a type of composite material composed of two layers:an outer layer of copper and an inner layer of steel is bonded or clad onto the steel core using the method of hot/cold roll boinding,creating a single sheet with combined
properties of both metal.
Q:what is about your payment term?
A:We accept FOB,CIF,CFR,EXW and etc.Usually 30%deposit by T/T,70% pay against the delivery.
Q:If there are any quality problems with the products i found after using them,how to solve it?
A:First, we will engage in discussions between both parties to find a solution. Depending on the provisions of the contract and the magnitude of the issue, we will take measures such as providing compensation or offering refunds or returns to resolve the matter.
Our approach to this issue is aimed at minimizing any losses experienced by the customer.
Q:Do you test your products before delivery?
A:We have our own laboratory and professional testing personnel. After each production process, we conduct relevant inspections. For the final product, we will provide you with both hardcopy and electronic versions of the quality certificates.
Additionally, we can incorporate additional testing items according to your specific requirements at any stage of the testing process.
Q:What is the minimum order quantity?
A:Usually a roll is MOQ,weighing about 1 ton.
Q:what is the lead time ?
A:Spot delivery time is about 2-3days afer the payment.15-30days of production according to the contract quantity after receiving the deposite.
PackagingQ:Can i get some sample before the order ?
A:Of course, we can provide you with free sample,but the freight should be paid by customers themselves.
Q:What is the copper clad steel sheet?
A:Copper clad steel sheet is a type of composite material composed of two layers:an outer layer of copper and an inner layer of steel is bonded or clad onto the steel core using the method of hot/cold roll boinding,creating a single sheet with combined
properties of both metal.
Q:what is about your payment term?
A:We accept FOB,CIF,CFR,EXW and etc.Usually 30%deposit by T/T,70% pay against the delivery.
Q:If there are any quality problems with the products i found after using them,how to solve it?
A:First, we will engage in discussions between both parties to find a solution. Depending on the provisions of the contract and the magnitude of the issue, we will take measures such as providing compensation or offering refunds or returns to resolve the matter.
Our approach to this issue is aimed at minimizing any losses experienced by the customer.
Q:Do you test your products before delivery?
A:We have our own laboratory and professional testing personnel. After each production process, we conduct relevant inspections. For the final product, we will provide you with both hardcopy and electronic versions of the quality certificates.
Additionally, we can incorporate additional testing items according to your specific requirements at any stage of the testing process.
Q:What is the minimum order quantity?
A:Usually a roll is MOQ,weighing about 1 ton.
Q:what is the lead time ?
A:Spot delivery time is about 2-3days afer the payment.15-30days of production according to the contract quantity after receiving the deposite.
