Audited Supplier
Features:
1.AGW is applied in both inside and outside.
2.EGW is only needed for outside vertical seam welding
3.All the machines are applicable to top-to-bottom tank erection with ground rail
4.First X-RAY qualification rate:above 99%
5.More suitable for erection of tanks less than 50M
6.Hydraulic Lifting device is necessary.
top to bottom tank construction
Automatic Electro-gas Vertical Welding Machine
Automatic Girth Welding Machine
Configuration:
| 1 | Plate cutting & Edge milling machine |
| 2 | Automatic girth welding machine(AUTO AGW) |
| 3 | Automatic electro-gas vertical welding machine(AUTO EGW) |
| 4 | Automatic butt/corner seam welding machine |
| 5 | Hydraulic lifting system |
| 6 | Automatic girth seam grinder |
| 7 | LNG tank welder |
For storage tank / tower fabrication and on site construction, we begin to R & D of its automatic equipments and turn-key whole solution since year 2001. After years of development, NAEC developed different fabrication and construction machines for various seams of Oil Storage Tank / LNG Tank / Tower / Tank Farm. The automatic tank welding machines we developed meet CE standard. In the meantime,
NAEC also developed matched equipments for top-to-bottom construction method, which has been widely applied in both China Strategic Oil Storage Project and oversea tank construction project.
Now NAEC has matured equipment for both bottom-to-top and top-to-bottom tank construction. By NAEC solution, we can help our client to finish one tank construction within one month. The X-ray first qualification rate is no less than 99.5%. And the mechanical performance meets the requirements of low-temperature impact test.
Tank Construction Machines
| 1 |  | Girth Seam Welding Machine >Applicable to both bottom-to-top and top-to-bottom tank erection >Adopting Sub Arc Welding technology >Standard machine suitable for shell plate width: 1.3M-2.8M >Max. Efficiency of AGW could be 30 times as manual welding |
| 2 |  | Vertical Seam Welding Machine >Suitable for tank plate wall thickness is from 10mm to 50mm >Motor frequency inverter drive system >Weatherproof control box with digital display for welding speed >Travel speed: 0~2200mm/min >Beveled gear drive reducer, good locking ability in both directions |
| 3 |  | Butt/Corner Seam Welding Machine >Applicable to butt seam welding of bottom plates >With magnetic idler system >More than 99% Qualified first X-ray test. >Suitable for both Top-to-Bottom and Bottom-to-Top Tank Construction Method |
