Audited Supplier
Three Advantages
1. Saving twice the site area and reducing twice the labor cost;.
2. Three processes integrated machining, high efficiency;.
3.Realize automatic loading and unloading, tool life intelligent monitoring system, easy to operate.
Machining Functions:
Conventional round steel shaft machining requires.
1. First cut the material with a sawing machine.
2. Milling end face to center hole or center drive double head lathe to center hole.
3.Lathe machining of external rounds.
4.Reverse turnaround processing of the outer circle, through the existing machine tool will be four processes, Sawing and Drilling Composite Center - Hole Lathe can be directly changed into two processes, can be completed, so that the processing process completely breaks the traditional processing methods, shorten the processing process, improve product stability and processing efficiency.
Processing Step
1.Placement of 6-meter round steel bundles in the loading rack.
2.Enter the desired length of the workpiece, the machining requirements and the number of workpieces.
3.A single piece of material is pushed from the side through the material channel directly into the left spindle bore to clamp the workpiece.;
4.The saw head guide moves down to start cutting the end face.
5.Once this is done, the saw head is moved to the center of the center drill power head and the workpiece to start punching the center hole;.
6.Upon completion, the left side chuck is released and the left side feeding mechanism feeds the material out of the spindle to clamp the workpiece according to the dimensions;...
7.After completion, the saw head guide moves downward and starts cutting the end face, while the manipulator grasps the workpiece and completes the splicing work.
8.After cutting, the cut material will be fed into the right spindle for machining through the robot, reversing the center hole and turning the outer circle.
9.Upon completion, the workpiece is removed by the robot and placed in the designated bin to enter the next cycle.
Note:During machining, all cutting data is checked using data to ensure automation stability.
Technical parameters | Unit | JXJDC70 |
Machining diameter range | mm | Φ14-65 |
Machining length range | mm | 100-800 |
Spindle bore diameter | mm | A2-8 |
Chuck |
| Hollow 10 inches |
Center hole model number |
| Type A/B/C/R |
Spindle |
| 10-30 |
Spindle speed | r/min | 0-2000 |
Sawhead speed | mm | 50-150 |
Consistency of milling length at both ends | mm | ±0.05 |
Center Hole Depth Consistency | mm | ±0.05 |
Center hole plane perpendicularity | mm | 0.025/50 |
Loading and unloading channels and machine dimensions | mm | 6000+3420x1620x1950 |
