Audited Supplier
| OEM/ODM | ||
| 5+ manufacturing research experience | ||
| Specializing in the production of new energy vehicle charging equipment, including car charger/charging adapter/discharger, etc., with a professional design/R & D/production/after-sales team | ||
| Professional R & D and manufacturing team | More than 5400 square meters of office space | 100+ professional equipment and workers |
| Integrity I conscientiousness |responsibility | innovation | ||
Type1 Tester
Type1 tester, is a professional test equipment with excellent performance. It is highly versatile and can be applied to all types of Type1 AC charging piles. Whether it is a small household charging pile or a large charging pile in a public area, this tester can accurately detect its performance. It can detect the output voltage, current stability, charging efficiency and other key parameters of the charging pile to ensure the safe and reliable operation of the charging pile. In today's era of increasing popularity of electric vehicles,Type1 tester for the quality of charging piles, to provide users with a safe and efficient charging experience, to promote the healthy development of the electric vehicle industry.
As shown in the figure, the names of the various parts of our tester are clearly displayed here. From the main structure to the subtle accessories, each part has its own specific function and role. Among them, the main panel part carries the key display and operation areas, allowing users to intuitively obtain test data and parameter Settings. The connection port part is responsible for a stable and reliable connection with the charging pile being tested. The various parts work together to form this powerful tester. Whether in a laboratory environment or an actual charging pile inspection site, these clear partial names help users better understand and use the tester.
Humanized design and accurate measurement
The power switch design is very humanized and practical. When used with a wire, it can be pushed upward, at which time the power is switched on and the tester begins to operate, providing stable power support for various test operations. In the case of wireless use, you can flip down the power switch to open the wireless test mode to meet the test requirements in different scenarios. If the power switch does not move, it means that it is in the off state, ensuring that the device will not consume excess power when not in use, and also increasing the safety of the device. The product also has real-time dynamic display function, by accurately measuring the cp signal of the charging pile motherboard and the resistance of the charging gun, users can know the real-time status of the charging pile in the first time. Whether it is charging power, voltage stability or other key parameters, it can be clearly presented in front of the user. Our products are designed and produced in strict accordance with the model standard, and can be closely connected with the gun head. The silver plated guide pin is used in the connection part, which greatly improves the accuracy of data transmission. The silver-plated guide needle has good electrical conductivity and oxidation resistance, which can ensure the accuracy and reliability of the test data, and provide users with professional and accurate charging pile test services.
This is an American standard 48A socket. It is specially designed for the type1 head of 220V, which can be perfectly adapted to the corresponding charging equipment. This socket shows excellent performance while ensuring a stable connection. The 220V input voltage ensures an efficient and safe charging process. Whether for home use or public charging places, this American standard 48A, 220V type1 socket can provide users with reliable charging support, meet the needs of charging equipment in different scenarios, and contribute an important force to the popularity and convenient use of electric vehicles.
Lnstallation master instructions
*And data reference
*Data reference:
| CP signal measurement of charging pile motherboard | |
| CURRENT | S1, S2, CLOSED |
| 13A | -8.09±5% |
| 16A | -7.19±5% |
| 32A | -2.39±5% |
| 10A | -9.00±5% |
| 8A | -9.60±5% |
| 24A | -4.80±5% |
| Charging gun resistance measurement | |
| CURRENT | NORMAL STATE |
| 16A | 680Ω±5% |
| 32A | 220Ω+5% |
*Usage method:
1. Insert the charging gun, and the display does not light up
2.Press S1, S2 switch, then the display light up, according to the table data, judge whether the charging pile motherboard is normal
3.Resistance is to measure the resistance inside the charging gun. The resistance value is different when the charging gun button is pressed and when the charging gun button is not pressed
4.Voltmeter and ammeter are used to measure whether the charging line is short circuit and there is no power output
*Attention to use
1.The installation master does not have 220V power supply for on-site installation. The charging pile tester is designed without a power supply, and the power supply is taken from the charging pile.In this case, only when the charging pile is energized,the tester display can light up. The display will not light up without power on the charging pile
2.Voltmeter and ammeter are used to measure whether the charging line is short circuit and there is no power output
| Advantages | No power supply is required, and other data can be fully measured when the main board of the charging pile is normally energized |
| Disadvantages | When detecting the charging pile, it can only be used normally when the S1 and S2 switches are closed at the same time, and the measurement is not comprehensive when the main board of the charging pile is broken |
Charging pile manufacturer's instructions
*And data reference
Data reference:
| CP signal measurement of charging pile motherboard | |||
| CURRENT | S1,S2, CLOSED | S1 CLOSURE | S1,S2,CLOSURE |
| 13A | 12.00±5% | -7.44±5% | -3.60±5% |
| 16A | 12.00±5% | -6.39±5% | -7.19±5% |
| 32A | 12.00±5% | -0.79±5% | -2.39±5% |
| 10A | 12.00±5% | -8.50±5% | -9.00±5% |
| 8A | 12.00±5% | -9.20±5% | -9.60±5% |
| 24A | 12.00±5% | -3.60±5% | -4.80±5% |
| Charging gun resistance measurement | |||
| CURRENT | NORMAL STATE | ||
| 16A | 680Ω±5% | ||
| 32A | 220Ω±5% | ||
*Usage method:
1. Insert the three plugs into the 220V power supply, and then the two displays will light up
2. Insert the charging gun into the front port of the tester
3.Turn on S1 switch to see CP voltage change (indicator model does not have this function)
4.Turn on S2 switch to see CP voltage change (indicator model does not have this function); After completing the above steps,the charging pile also starts to work, there is a voltage output,and the data can be seen on our circular display
5. lf you need to output with load, just plug the electrical appliance into the output socket. (Output socket rated power is16A)
6. Press the button on the charging gun, you can see the change of the ohmmeter, so as to judge whether the charging gun is bad or the current is wrong (the indicator model does not have this function)
*Attention to use
1.For charging pile manufacturers, since there is 220V power supply on site, the tester is directly designed to use external 220V power supply. When the charging gun is inserted, the CP voltage displays about 12V.Press S1 and S2, corresponding to the data in the details page,judge whether the charging pile motherboard is good.
2.Resistance is to measure the resistance in the charging gun,the resistance value is 7 types when pressing the charging gun button and not pressing the charging gun button, but also refer to the table in the details page, voltmeter and ammeter are used to measure whether the charging line is broken and there is no power output
| Advantages | The detection is more comprehensive, can measure all the data of S1S2,can measure the resistance of the charging gun, Output voltage current |
| Disadvantages | The detection requires voltage, which is inconvenient to carry ou |
| Main Products | ||
 |  |  |
| Type2 to Type1 | Nacs to Type1 | All Type1 Products |
 |  |  |
| All GBT Products | All Type2 Products | All NACS Products |
Qiaoyi company is a professional manufacturer of Electric car chargers with several years experience.Our factory located in Jiangsu,Nantong, Province, China, we have more than 200+ employees. Our products include portable EV charging cables , portable EV chargers , wall mounted charging piles,EV charging stations , EVcharging adapters . Our products have necessary patents in terms of the appearance and functions , ensuring that our customers are more advantaged in the local market and not interfered by imitators . All products have the certifications required by the local market.
| About Us | |
| 10+ Years | Evse Manufacturer Experience |
| Professional R&D Team | We have 8 Professional R&D personnel |
| Powerful Productivity | Produce 100,000 pieces per month |
| Multiple patent certificates | Product Quality assurance |
Q1. Are you a factory?
A: We are a professional manufacturer for several years.Covering the whole product system of home charging piles.
Q2. Do you test all your products before delivery?
A: Yes, we have video inspection and testing before delivery.
Q3. What about your warranty for EV Charger?
A: Generally 1 year.
Q4. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and shipping cost.
Q5. Can I customize my logo?A: Yes, OEM/ODM is also available.
