Gains FRP Fiber Septic Tank Fabricators Fiberglass Septic Tanks China Small Size Toilet SMC Spetic Tank

     Gains Frp Fiber Septic Tank Fabricators Fiberglass Septic Tanks China Small Size Toilet SMC Spetic Tank

    Technical Background

With The Continuous Advancement Of New Rural Construction, The Renovation Of Rural Toilets Has Become A Major Focus Of Improving Rural Sanitation Conditions. A New Type Of Glass Fiber Reinforced Plastic Building Material Has Become A Must For The Reconstruction Of Rural Toilets - SMC Resin Molded Septic Tank. This Kind Of Glass Fiber Reinforced Plastic Septic Tank Uses The Sedimentation Effect Produced By The Proportion Of Parasite Eggs To Be Greater Than That Of Feces And Urine Mixture, And The Principles Of Feces Airtight Anaerobic Fermentation, Liquefaction, Ammoniation, Biological Antagonism, Etc. To Remove And Kill Parasite Eggs And Germs, Control The Breeding Of Mosquitoes And Flies, So As To Achieve The Effect Of Harmless Feces. The Three-Compartment Septic Tank Is Composed Of Three Connected Pools. Fermentation And Decomposition, The Manure Liquid In The Middle Layer Flows From The First Pool To The Third Pool In Order To Achieve The Purpose Of Precipitating Or Killing Parasite Eggs And Germs In The Feces, And The Manure Liquid In The Third Pool Becomes High-Quality Fertilizer.

Product Description
Fiberglass Molded (SMC) Septic Tanks Are Molded Into Septic Tanks Through The Molding Process And Are Bonded With Epoxy Structural Adhesive Or Bolted Flange Connection. It Is Used For Compartmental Sedimentation Of Domestic Sewage And Anaerobic Digestion Of Sludge. Molded (Smc) Septic Tanks Are Convenient For Use In Rural Households. Fiberglass Molded (SMC) Septic Tanks Have Successfully Solved The Problems Of Brick Structure Septic Tanks Such As Leakage, Short Service Life, Poor Operating Conditions, Difficult Maintenance, High Cost, And Long Construction Period Of Reinforced Concrete Septic Tanks.

FRP/GRP Septic Tank Is An Ideal Tank For Toilet Drain When There Is No Sewage System And Construction Chain. 0.5M3-2.5M3 Septic Tanks Are Suitable For Toilet Drain And Several Houses, More Bigger Ones Will Be Used For Residence Community, Supermarket And Hotel Etc.
 

Working Principle:

SMC Septic Tank Is A Primary Treatment Structure That Uses The Principle Of Sedimentation And Anaerobic Fermentation To Remove Suspended Organic Matter In Domestic Sewage. Domestic Sewage Contains A Large Number Of Impurities Such As Feces, Paper Scraps, And Pathogens. The Solid Concentration Of Suspended Matter Is 100-350Mg. Sewage Enters The Septic Tank And Undergoes 12-24 Hours Of Precipitation To Remove 50%-60% Of Suspended Solids. After More Than 3 Months Of Anaerobic Digestion Of The Settled Sludge, The Organic Matter In The Sludge Is Decomposed Into Stable Inorganic Matter, And The Perishable Raw Sludge Is Transformed Into Stable Cooked Sludge, Which Changes The Structure Of The Sludge And Reduces The Moisture Content Of The Sludge.

Product Testing
After Testing, The Anti-Aging Performance Of This SMC Molded Septic Tank Is Very Outstanding. After The Test Sample Is Placed In A Temperature Control Device And Exposed To A Xenon Lamp At 60 Degrees Celsius And Rained For 500 Hours, Its Flexural Strength Changes: >3; In Addition, This Septic Tank Also Has Super Corrosion Resistance: At Room Temperature, The Sample Was Immersed In The Corrosive Medium For 2 Hours And There Was No Phenomenon Of Cracking, Swelling, And Whitening Of The Surface; The Resin Products Buried Deep In The Ground Should Be Considered More About Its Thermal Expansion And Contraction Properties: After Testing Place The Sample In An Oven At 60 Degrees Celsius For 16 Hours, And Then Place The Sample In A Cold Box At Minus 40 Degrees Celsius For 2 Hours, Its Expansion Rate ≤ 0.2%; Shrinkage Rate ≤ 0.09%; Impact Strength ≥ 65KJ/m2; Bending Strength ≥ 130Mpa/m2

Application:

• Homehouse
• Townhouse
• Aquaculture, Fish Farming Filtration System
• Centralized Filtration System
• Environmental Water Treatment
• Industrial Water Treatment

Hengshui Gains Trade Co., Ltd. is Located In Jizhou City, Hebei Province-Biggest Production Base Of FRP Products And Radiators In China, Combines Advantages Of Local Different Industries, Hengshui Gains Trade Co., Ltd. Consists Of Several Large-Scale Manufacturers Of, Depends On Customers' Different Requirements, We Recommend And Choose A Suitable Manufacturer To Satisfy And Fulfill, We Can Provide Design, Supply, Shipping, Installation, Commissioning, Etc One-Station Service Or Technical Consultation Service. From Our Company To Tianjin Seaport Is 300Km, To The Nearest Airport, Is 180Km, Nearest High-Speed Train Station Is 90Km.

Our Core Business And Services Are:  

1, FRP/GRP Products:  FRP Vessel & Tower, FRP (Motor) Pipe, FRP Cooling Tower, FRP Grating, FRP Electrolytic Cells, FRP Septic Tank
2, The Whole Set Of FRP Products Production Line And Technology: Computer Control Filament Winding Machine, FRP Protrusion Production Line, Molded FRP Products Production Line
3, Radiator
4, Electrical Cable
5, Sluice Gate Etc Facilities For Water Conservancy
6, Rubber Bridge Bracing
7, The Whole Set Of Chemical-Making Equipment & Technology: Mannheim Process Potassium Sulfate-Making Equipment & Technology, Titanium Dioxide Production Equipment & Technology

Q1: Why Choose Gains Trade?
A1: 15+ Years Experience In FRP Industries, Have Rich Experience That Provides Different FRP Products To Fluor, Technip, Dossan, Arkema, Veolia, Wison, Dupont, Etc.

Q2: Can You Choose The Correct Raw Material For Our FRP Product?
A2: Absolutely, Pls Provide Medium & Concentration, Temperature, Pressure, Etc Technical Parameters, PP/FRP, PVC/FRP, PVDF/FRP, Etc Pipe/Tank/Tower Also Are In Our Supply Scope. 

Q3: What's Your Delivery Time?
A3: We Have Several Manufacturing Plants, And Each Plant Has A Design Department And Production Facilities, We Can Finish Your FRP Products In The Shortest Time.

Q4: Which Port Is Nearest To Your Plant?
A4:From From Our Plant To Tianjin Seaport Is 300 km, To Shijiazhuang/Jinan Airport Is 150 km, And To Hengshui, High-Speed Train Station Is 30 km.

Q5:How Can We Guarantee The Quality?
A5:Always A Pre-Production Sample Before Mass Production;
Always Final Inspection Before Shipment;

Q6:Are You A Manufacturer Or A Trading Company?
A6:We Are A Manufacturer, Providing OEM & ODM Services.