4c2h4o2-100 Aceticacid Gas Electrochemical Sensor

Price $68.70 Compare
Min Order 1 Piece
Shipping From Hubei, China
Popularity 492 people viewed
Quantity
+-
 

HUBEI AERITECH CO., LTD.

VIP   Audited Supplier 1 year
Profile Certified by SGS/BV
4C2H4O2-100
Electrochemical Gas Sensor
Surface Type
Analog Type
Integration
Plastic
IP65
Medium
RoHS
Customized
3-Electrode Electrochemical
0~100 Ppm
≤60 S
<±2% Signal
Linear
<2% Signal/Month
AERI
Packing Bottle
30 ml
China
4204960212
Product Description
4C2H4O2-100 AceticAcid Electrochemical Sensor 
(P/N: SEC-4C2H4O2-100)

 
 
Technical Specifications
MEASUREMENT 
Operating Principle3-electrode electrochemical
Detection Range0~100 ppm
Sensitivity100± 50 nA/ppm
Response Time (T90)60 s
Repeatability<±2% signal
LinearityLinear
Long term output Drift<2% signal/month

ELECTRICAL
Resolution1 ppm
Recommended Load5~30 
Bias Voltage300mV

ENVIRONMENTAL
Operating Temp. Range-20°C ~ 50°C
Operating Humidity Range15% RH ~ 90% RH non-condensing
Operating Pressure Range800 ~ 1200 mbar




LIFETIME
Recommended Storage Temp.0°C to +20°C in sealed container
Expected Operating Life24 months in air
Storage Life6 months in original packaging
Standard Warranty12 months from date of despatch

Product Dimensions 

All dimensions in millimeters (± 0.1mm)
 


Cross-sensitivity Data
GasConcentration(ppm)Output signal
(ppm C2H4O2 equivalent)
Carbon monoxide30 100
Carbon dioxide50000
Methane30000
Whilst the Gas Sensor are designed to be highly specific to the gas they are intended to measure, they will still respond to some degree to various gases. The table below is not exclusive and other gases not included in the table may still cause a sensor to react. The cross-sensitivity values quoted are based on tests conducted on a small number of sensors. They are intended to indicate sensor response to gases other than the target gas. Sensors may behave differently with changes in ambient conditions and any batch may show significant variation from the values quoted.
SAFETY NOTE:
Connection should be made via a PCB mounting socket. Soldering to pins will void the sensor's warranty.
It is important that exposure to high concentrations of solvent vapours is avoided, both during storage, fitting into instruments, and operation;
If the Gas Sensor is removed from application circuit, a jumper should be added on 'R' and 'S' pin.
As applications of use are outside our control, the information provided is given without legal responsibility. Customers should test under their own conditions, to ensure that the sensors are suitable for their own. The data is given for guidance only. It does not constitute a specification or an offer for sale.
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA