Audited Supplier
Capacity:5~20tons
Span:10.5-31.5m
Lifting height:16m
Control:Cabin control
Controller:joystick master controller
Power voltage:380V or customized
Working class:A6 or A7
Motor:S3-40%
This crane is a special product equipped with electromagnetic carrier beam that used to lift iron or steel plates, pipes and so on. It consists of bridge, crane travelling mechanism, trolley, electric equipment and lifting beam. Both travelling mechanism and trolley motors are special motors for cranes, large starting torque and loading capacity.
The electromagnetic beam can be taken down from the hook or desinged as fix hanger. The beam length can be designed as requirements. The beam can be parallel of plumbing with crane girders depending on transporting environment.
For higher application requirements, extractable and 360 degree electromagnetic beam suspending system can be provided. Double Girder Overhead Magnet Crane 40 ton
The number of rectangular magnets below spreader beam is considered to the size of long billet need to be lifted.
Maximum back up time of battery for magnets shall have of 30 minutes.
The magnets is suitable for temperature under 200 deg C.
Full length chequered plate platform at both sides. The minimum width of platform as request.
Load cell for over load protection of hoist on request.
Alarm bell provided for safety purpose.
Canopy is provided for electrical equipments for weather protection outdoor. Rail anchoring & storm anchoring are all on request. Double Girder Overhead Magnet Crane 40 ton
The General arrangement drawing with load data & Quality Assurance Plan will be submitted with offer
Initial fill of lubricants, gear box oil etc., supplied along with the crane.
Performance feature:
The carrier-beam is cross structure, which is reliable and has good safety features, and has a certain function of preventing swinging. The lower part of the carrier-beam can bring special lifting appliances, such as magnetic chuck and tongs, etc.
Safety Feature:
Main lifting motor with thermal protection,
Overload protection,
Rubber buffers Double Girder Overhead Magnet Crane 40 ton
Protective earthing,
Crane switch and travel end switch,
Emergency switch can stop all movement when any dangerous happened,
Sub-assemblies characteristic are tested before assembly.
All cranes must be pre-assembled and tested before leaving factory and offer the certification of test.
Used in:
Ship Yards
Metal Working
Service Centers
Cutting Table Operations
Shipping and Receiving
Fabricating Areas
Welding Departments
Customization
We can design cranes meets your need, it would be very kind of you to give us the data needed listed below:
1. Lifting capacity.
2. Span length. (cantilever length)
3. Lifting height. (hook center to ground)
4. Power supply: Voltage.
5. Do you need rails? How long is the crane traveling distance?
6. Working condition: Which material to lift? Temprature?
7. Would be better if you have drawings of your plant.
| ITERM | QC type grab crane | |||||||||
| Lifting Capacity | t | 5 | 10 | 16 | 20 | |||||
| Span | m | to 31.5 | ||||||||
| Working Class | A6 | |||||||||
| Speed | Hoist | m / min | 40.1 | 40.7 | 41.8 | 48.6 | ||||
| Trolley | 44.6 | 45.6 | 41.8 | 48.6 | ||||||
| Crane | 93.7 | 86.4 | 76 | 89 | 89 | 87.3 | 87.3 | |||
| Motor | hoist closing | Kw | YZR225M-8/22*2 | YZR280S-10/37*2 | YZR315M-10/75*2 | YZR355M-10/90*2 | ||||
| trolley | YZR132M 2 -9/3.7 | YZR160M 2 -6/7.5*2 | YZR160M 2 -6/7.5 | |||||||
| crane | YZR160M 1 -5.5*2 | YZR160M 2 -6/7.5*2 | YZR160M 2 -6/7.5*2 | YZR160L-6/11*2 | YZR160L-6/11*2 | YZR180L-8/11*2 | YZR180L-8/11*2 | YZR200L-8/15*2 | ||
| Power | 3-phrase 50HZ 220V~480V according to your requirements | |||||||||
| Working environment | The temperature of working environment is -10~+60° C; The relative humidity is no more than 50% when the temperature is +40° C; | |||||||||
Henan Mine Crane Co., Ltd. was established in 2002 with a registered capital of 1.177 billion yuan, construction area of 1.62 million square meters, more than 4500 employees and more than 3500 sets of advanced processing equipment.
Specializing in the R & D, production, sales and service of more than 110 kinds of cranes and supporting parts in three series of "Kuangyuan" brand bridge cranes, gantry cranes and electric hoists.
Our company is a national high-tech enterprise with a technical team composed of more than 10 industry top experts and more than 200 middle and senior engineers. It is responsible for the innovative design and development of products. At present, it has obtained more than 300 national patents and provincial scientific and technological achievements
In 2020, the production and sales of all kinds of single beam and double beam lifting equipment will be nearly 100,000 sets, with sales of 5.675 billion yuan and tax payment of 205 million yuan. The company has 428 sales and service organizations all over the country, serving more than 6000 medium and high-end customers, and has made remarkable achievements in more than 50 key industries such as aerospace, automobile and ship, steel smelting, petrochemical industry, electronic information, electric power industry, water conservancy, railway and military industry.
The developed intelligent storage crane, precision positioning crane, automatic container gantry crane, nuclear grade special crane, clean explosion-proof automatic crane, multi fulcrum flexible crane, simulated maritime rescue crane and other sophisticated products serve Baosteel, China Railway, MCC, CNNC, AVIC and other large enterprises. The products cover more than 80 countries and regions.
We have rich experience in production and export:
We have exported our cranes to Australia, Bangladesh, Iraq, Pakistan, Philippines, USA, Egypt, Peru, India, Turkmenistan, Singapore, Ethiopia, South Africa, Saudi Arabia, Malta, Albania, Ukraine, Vietnam, Kenya, Nigeria, UAE, Cameroon, Uruguay, Bahrain, Thailand, Kazakhstan, Germany, Sultan,
Chile, Oman, Romania, Malaysia, Armenia, Jordan and so on, received good confirmation and welcomed from them!
