Audited Supplier
Heavy Duty Guillotine Metal Cutting Machine Scrap Steel Copper Aluminum Hydraulic Gantry Shear Machine
Q91 series scrap metal shear machine is also called the guillotine shear or the gantry shear widely used for metal recycling Industry to cut the scrap metal like the copper, the steel, stainless steel and so on. The gantry shear is a kind of heavy duty machine which cuts a large amount of scrap metal efficiently. This process can reduce the cost of the transportation, labor and the space of stock.
The equipment is used for light and thin steel, steel bar, steel plate, nickel plate, round steel, steel pipe, scrap copper, scrap iron, light metal structural parts, stainless steel, metal block, automobile body, aluminium alloy, copper material, steel wire, etc. The scrap metal is cut short in cold state and processed into qualified burden. Gantry shearing machine has a wide range of applications. It can be used not only as a processing equipment for metal recovery processing units, but also as a furnace material processing equipment for foundry workshop and metal cutting processing equipment for mechanical construction industry.
| Item | DETAIL DATA | REMARK | ||||||||
| 1 | Shear Main Cylinder | Model | YG340/250-890 | QTY | 2 | 250t ×2=500t | ||||
| Nominal Thrust | 2500kN | Stroke | 890mm | |||||||
| 2 | Press Cylinder | Model | YG180/120-950 | QTY | 2 | 63t ×2=126t | ||||
| Nominal Thrust | 630kN | Stroke | 950mm | |||||||
| 3, Optional | Shear Pushing Cylinder | Model | YG180/120-6350 | QTY | 1 | 63t Pushing Cylinder | ||||
| Nominal Thrust | 630kN | Stroke | 6350mm | |||||||
| Hydraulic Motor | Model | JMDG16-1600B | QTY | 1 | Chain Drive | |||||
| 4 | Optional Side Cylinder | Model | YG160/105-350 | QTY | 2 | 50t x2 | ||||
| Nominal Thrust | 500kN | Stroke | 350mm | |||||||
| 5 | Material Tank(Pushing)Dimension | 6500×1500×700 | LXWXH | |||||||
| 6 | Maximum Working Pressure | 28MPa (Working 21-25MPa) | ||||||||
| 7 | Shear Blades Length/Shear Height Opening | 1600mm / 600-870mm | ||||||||
| 8 | Press Width/Feed Height Opening | 1600mm / 600-900mm | ||||||||
| 9 | Oil Required | 28Drums | 200L/Drum | |||||||
| 10 | Main Motor Power | 45kWx3 / 380V/3PH,50Hz(Customized) | 135kw | |||||||
| 11 | Cutting Angle | 11degree | ||||||||
| 12 | Maximum Cutting Range(20# steel) δb≤450N/mm² | Round Bars:φ90mm | Blade Middle Point | |||||||
| Square Bars:80×80mm | ||||||||||
| Steel Plates:50×400mm | ||||||||||
| 13 | Cutting Speed | 2-3times/min | ||||||||
| 14 | Main motor | Model | 225M-4 | QTY | 3 | 135kw | ||||
| Power | 45kW | RPM | 1480r/min | |||||||
| 15 | Plunger pump | Model | A4V250 | QTY | 3 | |||||
| Pressure | 31.5MPa | Displacement | 250ml/r | |||||||
| Power | 2.2kW | Displacement | 45m³/h | |||||||
| 16 | Cooling tower | Model | LKT-80 | QTY | 1 | For summer | ||||
| Power | 2.2kW | Cooling capacity | 45m3/h | |||||||
| 17 | Oil Heating | Heating Elements Installed in oil tank for winter using. | ||||||||
| 18 | Machine Weight | About 40tons | ||||||||
The control adopts a cartridge valve integrated system, with adjustable pressure, stable flow, reliable action, long service life, and reduced connecting pipelines and leakage points. The fuselage adopts a gantry structure: it is composed of a frame, a hydraulic cylinder, a hydraulic power system and an electrical system. The frame is welded with high-quality steel plate, and the internal stress is eliminated by high temperature annealing. The tonnage of the pressing cylinder is realized by a piston cylinder. The cylinder body is made of high-quality 45# steel. The surface of the piston rod is quenched by medium frequency, which has a long service life. The main components of the oil cylinder adopt high-quality material sealing ring to ensure reliable sealing.
High efficiency and low labor cost.
Big enough pressing room to feed large size scrap.
Customized feedbox size and blade length.
We are factory with strict quality control team.
Project Case
Lifelong maintenance and considerate technical support!
1) Any problem before or after delivery, you could find and talk with us anytime anywhere.
2) Technicians can be sent to abroad, door to door service
3) Video / CD of test running and installation, User's Manual.
4) Complete parts & tools in box sent with machine
Quality & After-sales
Quanlity Control:
1.We have a QC team,Strict quality control under TUV,SGS, ISO9001. Our QC department strictly carries on a precise process to ensure best quality.
2.We salesman ,also as a order follower,would trace every phase of production from the beginning.
3.We would try our best to help clients solve problems when they occurred.
After Sales Service:
1.We provide Services to translate Operation Manual and Other Documents into your language, worry-free to operate and maintain
2.7x24 Technical Phone Service, we do care your real problems anytime Engineers available to service machinery overseas
3.We have continues record for our customs with details to provide faster and more efficient custom service
Any more questions please feel free to contact us......
