Audited Supplier
bi-color LED
Household Appliances
RGBW
30°
1W
IP68
RoHS
Elecsound
bulk
Rohs
China
8541401000
Product Description
5mm Bi-color LED
ELECSOUND
Features
Two chips are matched for uniform
Light output, wide viewing angle
Long life-solid state reliability
I. C. Compatible/Low power consumption
Pb free
Descriptions
The LED lamps contain two integral
Chips and is available as both bicolor and bipolar types
The Bright Red and Green light is emitted by diodes
Of GaAsP/GaP and GaAsP/GaP respectively
Type of bipolar lamps are both White Diffused and
Color Diffused while the bicolor are White Diffused
Usage Notes:
The ultra bright LED is an electrostatic insensitive device, so static electricity and surge will damage the LED. It is required to wear a wrist-band when handling the LED. All device, equipment, machinery, desk and ground must be properly grounded
When using LED, it must use a protective resistor in series with DC current about 20Ma
Applications
Status indicators
Commercial use
Advertising Signs
Back lighting
Product Overviews
We currently offer a broad range of capacitors, LEDs, Cermet Trimming Potentiometers, PCBs, Semiconductors, Transistors, Zinc Oxide Varistors, Switches and Resistors.
Company Information
Elecsound is an ISO Certificated manufacturer of high quality, high reliability electronic components, formed in January of 1996. Our staff has over 10 years of experience with excellent English. All of our employees have a strong work ethic and a strong commitment to provide the high quality products that consistently meet or exceed our customer's requirements.
Certificates
Packaging & Shipping
FAQ
1: How long is your lead time?
It depends. Normally, it is 2-6 working days if the goods are in stock, or it is 7-40 days if the goods not in stock.
2: What is your terms of payment ?
For small amount orders, 100% better paid by PayPal or T/T in advance. For large amount orders like more than
10000USD, 30% T/T in advance , balance fully paid before shipment.
3. Do you have any MOQ limit for an order?
Yes, we have MOQ. different items have different MOQ. We will mark MOQ when we quote.
4: How to proceed an order?
Firstly, let us know your requirements or application. Secondly, we quote according to your requirements or our suggestions. Thirdly, customer confirms the samples and pay deposit for the official order. Finally, we arrange the production and ship once it's ready.
5: Do you accept online orders?
Sure!! We prefer to fulfil orders under Trade Assurance system, since both parties will be protected.
6: Do you provide samples? is it free or extra?
Yes, normally we could offer samples with free charge but do not pay the shipping freight.
7: How do you guarantee my goods right?
Order will be arranged exactly as requested, we will doubly check the packing and qty before delivering out also we will take you photos if required or necessary.
8: Is it OK to print my logo on the packing?
Of course, customized packing accepted!! But it may bring some cost, it depends on the qty, if small qty then we don't accept.
Contact us
ELECSOUND
Features
Two chips are matched for uniform
Light output, wide viewing angle
Long life-solid state reliability
I. C. Compatible/Low power consumption
Pb free
Descriptions
The LED lamps contain two integral
Chips and is available as both bicolor and bipolar types
The Bright Red and Green light is emitted by diodes
Of GaAsP/GaP and GaAsP/GaP respectively
Type of bipolar lamps are both White Diffused and
Color Diffused while the bicolor are White Diffused
Usage Notes:
The ultra bright LED is an electrostatic insensitive device, so static electricity and surge will damage the LED. It is required to wear a wrist-band when handling the LED. All device, equipment, machinery, desk and ground must be properly grounded
When using LED, it must use a protective resistor in series with DC current about 20Ma
Applications
Status indicators
Commercial use
Advertising Signs
Back lighting
| Device Selection Guide | |||||||
| LED Part No. | Chip | Lens Color | |||||
| Material | Emitted Color | ||||||
| 5019R1G3C-DSC | AlGaInP | Red | Water clear | ||||
| InGaN | Green | ||||||
| Absolute Maximum Rating (Ta=25C) | |||||||
| Parameter | Symbol | Absolute Maximum Rating | Unit | ||||
| Forward Pulse Current | IFPM | 70 | mA | ||||
| Forward Current | IFM | 30 | mA | ||||
| Reverse Voltage | VR | 5 | V | ||||
| Power Dissipation | PD | 140 | mW | ||||
| Operating Temperature | Topr | -40~+80C | |||||
| Storage Temperature | Tstg | -40~+100C | |||||
| Soldering Heat (5s) | Tsol | 260C | |||||
| Electro-Optical Characteristics (Ta=25C) | |||||||
| Parameter | Symbol | Device | Min. | Typ. | Max. | Unit | Test Condition |
| Luminous Intensity Iv Red 1500 2900 mcd | IF=20mA | ||||||
| Iv Green 1800 3500 IF=20mA | |||||||
| Viewing Angle 2θ 1/2 Red/green 30-40 | Deg (Note 1) | ||||||
| Peak Emission Wavelength λ P | Red 620 630 635 nM, IF=20mA | λ P Green 520 525 530 IF=20mA | |||||
| Spectral Line Half-Width Dλ Red 15 20 25 nm IF=20mA | |||||||
| Dλ Green 30 35 40IF=20mA | |||||||
| Forward Voltage VF Red 1.9 -2.3V | Green 2.9-3.5V IF=20mA | ||||||
| Reverse Current IR | Red/Green 10uA VR=5V | ||||||
Product Overviews
We currently offer a broad range of capacitors, LEDs, Cermet Trimming Potentiometers, PCBs, Semiconductors, Transistors, Zinc Oxide Varistors, Switches and Resistors.
Company Information
Elecsound is an ISO Certificated manufacturer of high quality, high reliability electronic components, formed in January of 1996. Our staff has over 10 years of experience with excellent English. All of our employees have a strong work ethic and a strong commitment to provide the high quality products that consistently meet or exceed our customer's requirements.
Certificates
Packaging & Shipping
FAQ
1: How long is your lead time?
It depends. Normally, it is 2-6 working days if the goods are in stock, or it is 7-40 days if the goods not in stock.
2: What is your terms of payment ?
For small amount orders, 100% better paid by PayPal or T/T in advance. For large amount orders like more than
10000USD, 30% T/T in advance , balance fully paid before shipment.
3. Do you have any MOQ limit for an order?
Yes, we have MOQ. different items have different MOQ. We will mark MOQ when we quote.
4: How to proceed an order?
Firstly, let us know your requirements or application. Secondly, we quote according to your requirements or our suggestions. Thirdly, customer confirms the samples and pay deposit for the official order. Finally, we arrange the production and ship once it's ready.
5: Do you accept online orders?
Sure!! We prefer to fulfil orders under Trade Assurance system, since both parties will be protected.
6: Do you provide samples? is it free or extra?
Yes, normally we could offer samples with free charge but do not pay the shipping freight.
7: How do you guarantee my goods right?
Order will be arranged exactly as requested, we will doubly check the packing and qty before delivering out also we will take you photos if required or necessary.
8: Is it OK to print my logo on the packing?
Of course, customized packing accepted!! But it may bring some cost, it depends on the qty, if small qty then we don't accept.
Contact us
