Audited Supplier
MLB
Malleable Iron
Threaded
Hot DIP Galvanized/ Zinc Plated/ Aluminum Enameled
Lb Type
UL 514A
ELECMAN
Carton
1/2"-4"
China
7307220000
Product Description
ELECMAN® Form 5 Malleable Iron Threaded LB Conduit Bodies
SERIES: Form 5 LB
MATERIAL: Malleable Iron
COLOR: Silver
SURFACE TREATMENT: Hot Dip Galvanized/ Zinc Plated/ Aluminum Enameled
TYPE: Threaded type
APPLICABLE THIRD PARTY STANDARDS:
• UL Standard 514A
• Fed.Spec. W-C-586D
• NEMA:FB-1
• NEMA 4
APPLICATION:
Form 5 malleable iron conduit bodies are used in conduit systems to:
• Act as pull outlets for conductors being installed.
• Provide openings for making splices and taps in conductors.
• Act as mounting outlets for lighting fixtures and wiring devices.
• Connect conduit sections.
• Provide taps for branch conduit runs.
• Make 90 degree bends in conduit runs.
• Provide for access to conductors for maintenance and future system change.
FEATURES:
FEATURES:
• Interchangeable with Appleton Form 35 conduit bodies.
• Built-in rollers on 11/4" to 4" C and LB bodies to facilitate wire pulling.
• Smooth and rounded integral bushings for protection of wire insulation.
• Solid neoprene gaskets may be converted to open type by pulling out perforated center section.
• Stainless steel cover screws.
• Domed sheet steel covers provide additional cubic capacity.
• Integral gasket cover provides NEMA 4 rating.
| FORM 5 MALLEABLE IRON THREADED LB CONDUIT BODIES | |||||
| MALLEABLE IRON | |||||
 | CATALOG NUMBER | TRADE SIZE | DIM A | DIM B | DIM C |
| MLB050W | 1/2" | 1-5/16" | 4-11/16" | 2-1/16" | |
| MLB075W | 3/4" | 1-1/2" | 5-3/8" | 2-1/4" | |
| MLB100W | 1" | 1-13/16" | 6-3/16" | 2-5/8" | |
| MLB125W | 1-1/4" | 2-5/8" | 8-1/8" | 2-3/4" | |
| MLB150W | 1-1/2" | 2-5/8" | 8-1/8" | 2-13/16" | |
| MLB200W | 2" | 3-1/8" | 10-1/2" | 4-7/16" | |
| MLB250W | 2-1/2" | 4-5/16" | 13-7/8" | 5-3/8" | |
| MLB300W | 3" | 4-5/16" | 13-7/8" | 5-7/8" | |
| MLB325W | 3-1/2" | 5-5/8" | 16-1/4" | 6-7/8" | |
| MLB400W | 4" | 5-5/8" | 16-5/8" | 7-3/16" | |
PACKING INFORMATION:
Inner packing: Individually shrink-wrapped for each conduit body
External packing: Corrugated carton
