ELECMAN® UL Listed Form 7 Gray Iron Threaded LR Conduit Bodies with Cover and Gasket LR Condulet Rigid Conduit Body LB
SERIES: Form 7 LR Type
MATERIAL: Gray Iron
COLOR: Gray
SURFACE TREATMENT: Hot Dipped Galvanized/ Zinc Plated/ Aluminum Enameled
TYPE: Threaded type
APPLICABLE THIRD PARTY STANDARDS:
• UL Standard 514A
• Fed.Spec. W-C-586D
• NEMA:FB-1
APPLICATION:
Form 7 gray iron conduit bodies are used in conduit systems to:
• Serve as pulling fittings.
• Make bends in conduit system.
• Provide openings for splicing
• Connect and change direction of conduit runs.
• Allow connections for branch runs.
• Permit access to conductors for maintenance.
FEATURES:
• Accurately tapped, tapered threads for tight, rigid joints and excellent ground continuity.
• Gray iron bodies with cast covers and gasket are suitable for use in wet locations.
• Unique clip cover design allows easy removal at any later time, without damaging the conduit body, the cover is secured with clips, not screws.
• Flat back design provides greater cubic content for easier wire pulling, and more room for splicing, Fits flush and snug against flat surfaces for more stable installation.
• Smooth hub bushings and cover openings protect conductor insulation. Smooth hub openings allow easy conduit joining.
• Pan-head cover screws secure cover clips and provide superior screwdriver seating and torque. Cover screws and clips are captive to prevent loss.
• Hub size (inches), body style, compliance data, maximum wire number/size and cubic capacity molded into body.

FORM 7 GRAY IRON THREADED LR CONDUIT BODIES (with cover) | ||||
GRAY IRON | ||||
CATALOG NUMBER | TRADE SIZE | DIM A | DIM B | DIM C |
GLR050C | 1/2" | 4.563 | 2.125 | 1.688 |
GLR075C | 3/4" | 5.125 | 2.375 | 1.938 |
GLR100C | 1" | 6.063 | 2.688 | 2.063 |
GLR125C | 1-1/4" | 6.500 | 3.125 | 2.563 |
GLR150C | 1-1/2" | 7.188 | 3.500 | 2.813 |
GLR200C | 2" | 8.188 | 4.063 | 3.563 |
PACKING INFORMATION:
Inner packing: Individually shrink-wrapped for each conduit body
External packing: Corrugated carton