50Hz 1500rpm 20-700kw Biomass Generator Set with Ce, ISO

Worksite needs to meet following basic requirements:
Ambient temperature between -40 to 40°C
Relative humidity less than 95% (35°C)
Site elevation not higher than 2500m
For outdoor installation, simple rain shelter is required
 
Fuel gas requirement:
Genset will be able to output at its full power with fuel gas with the specification as below:
Biogas must be purified before burning in engine
Suitable biogas conditions for genset
1m distance away from genset's pressure regulating valve of inlet
Temperature of Biomass : ≤40°C
Pressure  3-10kPa, velocity of pressure ≤1kPa/minute
H2S: ≤200mg/Nm3
NH3: ≤20mg/Nm3
Impurities particle size: ≤5μm, impurity content: ≤30mg/Nm3
Moisture content : ≤40g/Nm3
Heat value ≥40MJ/Nm3
Note: excessive sulfur contents can do serious damage to engine elements
Purification of Biomass  has a significant impact on machine life and continuous running time

1) Valve seat materials are imported special steel, valve use wear-resistant materials and the latest technology.
2) Piston and cylinder head production using new materials, high-performance low-emission hybrid rapid combustion cylinder. Combustion control technology to protect machine film.
3) Change the duration of the ignition control, long-life spark plugs.
4) Intergrated control diagnostics, intergrated approach to control the explosion-proof technology.

Shandong lvhuan power equipment Co., Ltd is a comprehensive high-tech company which is engaged in the researching, manufacturing and after-sale service of the new energy-saving generator products.
 
 Our main products are gas generator set, diesel engine and diesel generator set. It forms a series of products, including: Biogas gen-set, Coal mine gen-set, Natural gas gen-set, Biomass gen-set, Coke oven gas gen-set, Gas gen-set, Diesel gen-set and the entire building machine. These products cover almost all the range of power, and their power performance, economical efficiency and reliability are all in the advanced level of this field. 
 
We have attained ISO9001, ISO14001 and CE certifications, and carries them out in every production procedure. With the strong capacity of researching and designing, we can not only provide you with quality products , but also your good partnership in the general Power Generation Program, including: consulting service, project designing, construction, installation ,adjustments and facilities maintenance

Genset would be covered with plywood case or plastic film cover
Control panel, batteries, electric cables are packed with plywood boxes or cartons
Exhaust pipes, engine mufflers are put in the container without packing

1.Pre-sale service:
 
(1)We will send our engineer to prospect the site of power station free to charge.
 (2)According to the situation of site we can supply you many drawings:like power station floor plan,engineering flow sheet of circle cooling system,genset installation,genset foundation,electrical connection and some other techincal support etc.
 
2.Sale service:
 (1)we will send our engineer to the site to guide you the installation of generator set, subsystem and relative equipment.
 (2)We will debug the generator set till it can generate power successfully.
 (3)We will also supply a technical training to the operators.Orcan send your staff to our company.We can train you till you can operate the generator set.
 
3.After-sale service:
 (1)Our every engineers are in charge of different area,we will response periodically and support you technical service free of charge
 (2)For the quality problem, we will service for you free of charge during the guarantee period.
 
(3)One year guarantee period and lifetime service.
 (4)we solve quality problem in time when genset doesn't work,We insure to help our clients to gain the biggest economic profit.
 
Accessories
 
1.Application scope of the Accessories,such as 12v190,8v190,6190,6135 and other engine types.
 
2.All parts were from original factories or professional factories,complete in specification,keep good quality.