Audited Supplier
MDLSB-50/40
Yes(Except The Consumbles)
1 Year
School, Hospital, Lab
Customized
CE, ISO
Floor Type
Stainless Steel
Cooling Type
-40 Degree ~Room Temperature
Three Phase 380V/50Hz
LCD Display, Key Operation
PT100
7p
R22
Diameter 450*350h(mm), About 5L
795*770*(1150+Pole 500)mm
124kg
HEB
Standard Export Wooden Box
ISO9001: 2000
Xi'an
Product Description
50L closed cooling circulating chiller
Brief introduction:
This product is mechanically cooled by a totally enclosed compressor. The inner wall of the cooling tank has cooling copper coils. The refrigerant (Freon) continuously circulates through the coil on the inner wall of the water tank to cool the refrigerant in the tank. And then the refrigerant is conveyed to interlayer of the supporting equipment or the condensation coil through built-in circulation pump and external circulation pipeline. This method can cool the material in the reactor indirestly, and also cool & liquefie the steam in contact with condensation tube.
Generally speaking, this product can connect with the interlayer of a double-layer glass reactor, rotary evaporator, and condensation coil of the reactor for usage. It is also feasible to directly put objects or containers which need to be cooled into the bath for cooling or reaction.
The outlet pipe of this product is connected to the lower inlet pipe of the kettle or condenser. The circulating liquid comes out from the upper circulation port and returns to the inlet of this product through the pipe, forming a complete circulation.
Technical parameters:
Our factory:
Our certification:
Package & Delivery:
FAQ:
Brief introduction:
This product is mechanically cooled by a totally enclosed compressor. The inner wall of the cooling tank has cooling copper coils. The refrigerant (Freon) continuously circulates through the coil on the inner wall of the water tank to cool the refrigerant in the tank. And then the refrigerant is conveyed to interlayer of the supporting equipment or the condensation coil through built-in circulation pump and external circulation pipeline. This method can cool the material in the reactor indirestly, and also cool & liquefie the steam in contact with condensation tube.
Generally speaking, this product can connect with the interlayer of a double-layer glass reactor, rotary evaporator, and condensation coil of the reactor for usage. It is also feasible to directly put objects or containers which need to be cooled into the bath for cooling or reaction.
The outlet pipe of this product is connected to the lower inlet pipe of the kettle or condenser. The circulating liquid comes out from the upper circulation port and returns to the inlet of this product through the pipe, forming a complete circulation.
Technical parameters:
| Name | Low temperature cooling liquid circulating pump | |
| Model | MDLSB-50/40 | |
| Usage temperature range | -40ºC ~room temperature | |
| Environment temperature | 5 ~35 ºC | |
| Environment humidity | ≤70% ventilation | |
| Power supply | Three phase 380V/50HZ | |
| Safety protection | Delay, overcurrent, overheating, phase sequence, phase loss protection | |
| Display | LCD display, key operation | |
| Temperature control accuracy | ±0.1ºC | |
| Sensor | PT100 | |
| Total power | 5605W | |
Compressor | Specification | 7P |
| Quantity | 1 | |
| Power | 5145W | |
| Cooling capacity | 16268W | |
Circulation pump | Power | 280W |
| Lift | 10-12M | |
| Flow | 30-50L/min | |
| Pressure | ≤0.4MPa | |
Air-cooling condenser | Power | 180W |
| Heating exchange area | 21.2m2 | |
| Air volume | 3400m³/h | |
| Refrigerant | R22 | |
| Condensation coil | Φ16 copper tube plated by nickel | |
| Equipment material | Cold plate spray, anti-corrosion | |
| Water tank dimension&volume | Φ450×350H(mm) | About 55L |
| Available size in water tank | Φ350mm | |
| Cover opening | Φ350mm | |
| Outer circulation interface | Pagoda joint with Φ16mm outer diameter (facing the left side of the equipment) | |
| Overall dimension(W*D*H) | 795×770×(1150+pole 500)mm | |
| Net weight | 124KG | |
| Packing dimension | 830×740×1280mm wooden package 0.79m³ | |
| Packing weight | 178KG | |
Our factory:
Our certification:
Package & Delivery:
FAQ:
1. Are you the factory?
Yes, we're.
Established in 2004, we manufacture rotary evaporator, jacketed glass reactor, chiller etc.
2. What is the delivery time?
Normally, we have stocks for our hot sale products, the delivery time is about 5-10 days. For the customized instrument, it's about 10~20 days.
3. What's the warranty period? How do you provide this?
One year (12 months).
We have very strict inspection, the instruments which you received is high-quality and reliable.
If there's any error, we'll provide you the on line solution with in 12 hours. We'll provide you the spare parts and the shipping cost totally free.
If the problem was caused by the instrument quality, and cannot be repaired, we'll ship you the new one.
