Audited Supplier
| Equipment performance and main parameters | |
| Equipment operating cycle | 5.0 seconds |
| Equipment operator | 2 person |
| Estimated daily production (calculated based on 10 hours) | 7200 sets |
| Estimated monthly production (calculated on a 24 day basis) | 172800 sets |
| Equipment noise | ≤75db |
| Overall production line net size | Length 10000mm * Width 3000mm * Height 2000mm |
| Power supply standards | AC 220V,50HZ |
| Gas supply methods and standards | Seamless steel pipe segmented supply, 0.5~0.8Mp |
| Main standard component brand configuration | |
| Pneumatic components | SMC |
| Sensor | Panasonic |
| Programmable logic controller | KEYENCE |
| Servo motor | YASKAWA |
| Touch panel | PROFACE |
| Visual camera | KEYENCE |
Composition: servo motor, synchronous belt, product carrier, cylinder
'
Action description:
Manually place the product into the product carrier, and the servo motor drives the synchronous belt to transport the product to the handling position.
Composition: cylinder, dust removal box
Action description:
After the product carrier is in place, the cylinder extends and the box covers the product carrier. The dust removal box works to remove dust from the product carrier.
Composition: servo motor, cylinder
Action description:
After the product carrier is in place, the gripper will transport the product to the product carrier on the transfer track.
Composition: conveying mechanism, cylinder pushing, product carrier
Action description:
The transportation module arranges the products in sequence onto the product carrier, and the cylinder pushes the carrier to run to each workstation, achieving reflux of the carrier.
Composition: Laser engraving machine, barcode scanner
Action description:
After the carrier is in place, the laser engraving machine prints the product QR code, the carrier moves, and the scanning gun reads the content of the QR code.
Composition: cylinder, camera
Action description:
After the carrier is in place, the cylinder compresses the product, the camera takes photos to check if the PIN is qualified, and transmits the results to the PLC
Composition: camera, cylinder, darkbox
Action description:
After the product carrier is in place, the product circuit is conductive, the product light is on, the camera takes photos to check whether the product light is qualified, and the test results are fed back to the PLC.
Composition: Cylinder
Action description:
After the product carrier is in place, the marking module marks the qualified products with the production date as the marking information.
Composition: cylinder, synchronous belt, motor
Action description:
After the carrier is in place, the cylinder sequentially positions the carrier and the product, Transport module transports the finished product to the finished product conveyor belt.
GOTOP -industrial manufacturing automation solutions.
GOTOP always focus on auto parts and motor industry manufacturing automation solutions, whether it is production process automation or production process information systems GOTOP professional technology, provide core technical support to customers.
GOTOP has 59 patents including 7 invention patents (included in the audit) it has passed the National high-tech Enterprise certification the ISO Quality Management System certification the new professional certification, and the certification of small and medium-sized sci-tech enterprises in Shandong province.
GOTOP adheres to the principle of integrity and gratefulness follows the concept of high quality and customer first, accumulates experience constantly enhances r & D strength and creates a bright future with each partner hand in hand!
The competitiveness of the company
research and development:
• Rigorous evaluation and necessary experimental verification
• Build a professional project team
• Continuous improvement in engineering design, Modular rocket
• Keep up-to-date with project progress and feedback
Quality:
• Internal and external design review
• Implement PDCA for material inspection
• Gotop internal acceptance and customer pre-acceptance
• 1 year or above quality assurance
Manufacturing:
• Decompose the assembly process to make it more detailed
• Review the problem every day and make timely improvement
• Unified standard operating procedures and practices
• Implementation of PDCA
Services:
• Technical training
• Long-term free technical support from strategic partners
• Transfer of information and documents
