Audited Supplier
| Equipment performance and main parameters | |
| Equipment operating cycle | 10.0 seconds |
| Equipment operator | 1 person |
| Estimated daily production (calculated based on 10 hours) | 3600 sets |
| Estimated monthly production (calculated on a 24 day basis) | 86400 sets |
| Equipment noise | ≤75db |
| Overall production line net size | Length 1700mm * Width 1250mm * Height 1800mm |
| Power supply standards | AC 220V,50HZ |
| Gas supply methods and standards | Seamless steel pipe segmented supply, 0.5~0.8Mp |
| Main standard component brand configuration | |
| Pneumatic components | SMC |
| Sensor | Panasonic |
| Programmable logic controller | SIMENS |
| Servo motor | SIMENS |
| Touch panel | PROFACE |
| Visual camera | KEYENCE |
Overview: To achieve product transfer, all workstations work simultaneously, and PLC logic control.
Composition: Motor, Cam indexers
Action description:
By rotating the cam indexers, the product is transported to various workstations, while improving efficiency. The product carrier can be quickly replaced, and multiple models can be integrated.
Overview: After the product is detected by the camera, the robot automatically transports it to the product carrier, which is controlled by PLC logic.
Composition: Robot, electric gripper
Action description:
The camera takes photos to detect the position of the product and feeds back the detection results to the robot. The robot carries an electric gripper to automatically transport the product to the product carrier.
Overview: Robots carry tooling to perform motion detection on products.
Composition: Robot, tooling
Action description:
After the product carrier is in place, the product circuit is conductive, and the robot sequentially checks the product buttons to determine whether the product is qualified through the inspection machine, and feedback the test results to the PLC.
Overview: Check whether the appearance and lighting of the product are qualified
Composition: Camera, cylinder,electric cylinder
Action description:
After the product carrier is in place, the product circuit is conductive, the dark box descends to cover the product, the camera takes photos to check whether the product is qualified, and the test results are fed back to the PLC.
Overview: Transport the tested products to the marking station
Composition: servo motor, electric cylinder, electric gripper
Action description:
After the product carrier is in place, according to the test results, the qualified products are transported to the marking module, and the unqualified products are transported to the defective product conveyor belt.
Overview: Mark products that have passed the testing.
Composition: Cylinder
Action description:
The finished product handling module transports qualified products to the marking module, which marks the products with the production date
Overview: Implementing automatic separation and transportation of products
Composition: Synchronous belt
Action description:
The finished product handling module transports the marked products to the finished product conveyor belt (green), and directly transports non-conforming products to the defective product conveyor belt (red).
GOTOP -industrial manufacturing automation solutions.
GOTOP always focus on auto parts and motor industry manufacturing automation solutions, whether it is production process automation or production process information systems GOTOP professional technology, provide core technical support to customers.
GOTOP has 59 patents including 7 invention patents (included in the audit) it has passed the National high-tech Enterprise certification the ISO Quality Management System certification the new professional certification, and the certification of small and medium-sized sci-tech enterprises in Shandong province.
GOTOP adheres to the principle of integrity and gratefulness follows the concept of high quality and customer first, accumulates experience constantly enhances r & D strength and creates a bright future with each partner hand in hand!
The competitiveness of the company
research and development:
• Rigorous evaluation and necessary experimental verification
• Build a professional project team
• Continuous improvement in engineering design, Modular rocket
• Keep up-to-date with project progress and feedback
Quality:
• Internal and external design review
• Implement PDCA for material inspection
• Gotop internal acceptance and customer pre-acceptance
• 1 year or above quality assurance
Manufacturing:
• Decompose the assembly process to make it more detailed
• Review the problem every day and make timely improvement
• Unified standard operating procedures and practices
• Implementation of PDCA
Services:
• Technical training
• Long-term free technical support from strategic partners
• Transfer of information and documents
